- 22 7月, 2008 40 次提交
-
-
由 Oliver Neukum 提交于
Here's the fix. cdc-wdm has the same problem. The fix is the same. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Daniel Ribeiro 提交于
Remove the board-specific UP2OCR configuration from the pxa27x-udc driver. Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Srikanth Srinivasan 提交于
A couple of USB register initializations had to be changed on MPC85xx platforms. This is due to the internal SoC buses being different on MPC83xx SoCs vs MPC85xx SoCs. We currently handle this via an ifdef since 83xx and 85xx are mutually exclusive kernel builds. Signed-off-by: NSrikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Howells 提交于
Fix pointer/int cast in USB devio code, and thus avoid a compiler warning. A void* data argument passed to bus_find_device() and thence to match_devt() is used to carry a 32-bit datum. However, casting directly between a u32 and a pointer is not permitted - there must be an intermediate cast via (unsigned) long. This was introduced by the following patch: commit 94b1c9fa060ece2c8f080583beb6cc6008e41413 Author: Alan Stern <stern@rowland.harvard.edu> Date: Tue Jun 24 14:47:12 2008 -0400 usbfs: simplify the lookup-by-minor routines This patch (as1105) simplifies the lookup-by-minor-number code in usbfs. Instead of passing the minor number to the callback, which must then reconstruct the entire dev_t value, the patch passes the dev_t value directly. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Randy Dunlap 提交于
g_cdc needs to depend on NET, otherwise net-related build errors happen: ERROR: "netif_carrier_on" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "netif_carrier_off" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "netif_rx" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "alloc_etherdev_mq" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "free_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "register_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "print_mac" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "__alloc_skb" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "eth_type_trans" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "unregister_netdev" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "__netif_schedule" [drivers/usb/gadget/g_cdc.ko] undefined! ERROR: "skb_put" [drivers/usb/gadget/g_cdc.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Manuel Lauss 提交于
Copy the OHCI/EHCI PM callbacks of the PCI implementation since they work equally well on Au1xxx hardware. Tested on Au1200. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Manuel Lauss 提交于
- Fold multiple probe/remove callbacks into one function; - minor style fixes, no functional changes. Tested on Au1200. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1107) fixes a small bug in the usbfs registration and unregistration code. It avoids leaving an error value stored in the device's usb_classdev field and it avoids trying to unregister a NULL pointer. (It also fixes a rather extreme overuse of whitespace.) Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1106) fixes a race between opening and unregistering device files in usbfs. The current code drops its reference to the device and then reacquires it, ignoring the possibility that the device structure might have been removed in the meantime. It also doesn't check whether the device is already in the NOTATTACHED state when the file is opened. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1105) simplifies the lookup-by-minor-number code in usbfs. Instead of passing the minor number to the callback, which must then reconstruct the entire dev_t value, the patch passes the dev_t value directly. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
USB device files are accessible in two ways: as files in usbfs and as character device nodes. The two paths are supposed to behave identically, but they don't. When the underlying USB device is unplugged, disconnect signals are sent to processes with open usbfs files (if they requested these signals) but not to processes with open device node files. This patch (as1104) fixes the bug by moving the disconnect-signalling code into a common subroutine which is called from both paths. Putting this subroutine in devio.c removes the only out-of-file reference to struct dev_state, and so the structure's declaration can be moved from usb.h into devio.c. Finally, the new subroutine performs one extra action: It kills all the outstanding async URBs. (I'd kill the outstanding synchronous URBs too, if there was any way to do it.) In the past this hasn't mattered much, because devices were unregistered from usbfs only when they were disconnected. But now the unregistration can also occur whenever devices are unbound from the usb_generic driver. At any rate, killing URBs when a device is unregistered from usbfs seems like a good thing to do. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1024) takes care of a FIXME issue: Drivers that don't have the necessary suspend, resume, reset_resume, pre_reset, or post_reset methods will be unbound and their interface reprobed when one of the unsupported events occurs. This is made slightly more difficult by the fact that bind operations won't work during a system sleep transition. So instead the code has to defer the operation until the transition ends. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
Various cleanups and fixes to the i2c code in ohci-pnx4008: * Delete empty isp1301_command. The i2c driver command implementation is optional, so there's no point in providing an empty implementation. * Give a name to isp1301_driver. I'm surprised that i2c-core accepted to register this driver at all. I've chosen "isp1301_pnx" as the name, because it's not a generic ISP1301 driver (much like the isp1301_omap driver.) We might want to make the name even more specific (but "isp1301_ohci_pnx4008" doesn't fit.) * The ISP1301 is definitely not a hardware monitoring device. * Fix a memory leak on failure in isp1301_attach. If i2c_attach_client fails, the client is not registered so isp1301_detach is never called and the i2c_client memory is lost. * Use strlcpy instead of strcpy. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Aleksey Gorelov 提交于
USB debug port only supports 8 byte rx/tx packets. Although spec implies that "if a packet larger than eight bytes is received from the remote computer, the device must break the larger packet into eight-byte packets before sending the data to the Debug Port", the real PLX NET20DC device does not handle it right - data is corrupted on debug port end if serial interface sends >8 byte urbs. Patch below fixes the issue by limiting tx urb to 8 byte. Signed off by: Aleks Gorelov <dared1st@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
cdc-acm must give up secondary interfaces if the primary is disconnected and vice versa. This wasn't done correctly. Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
usb serial decrements the pm counter even if an interface has been disconnected. If it was a logical disconnect the interface may belong already to another driver. This patch introduces a check for disconnected interfaces. Signed-off-by: NOliver Neukum <oneukum@suse.de> Cc: Stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this patch implements - suspend/resume - aggressive autosuspend for the cdc-wdm driver - pre/post_reset Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
this patch saves power for cdc-acm devices that support remote wakeup while the device is connected. - request needs_remote_wakeup when needed - delayed write while a device is autoresumed - the device is marked busy when appropriate Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ben Collins 提交于
The 28xb, as documented in comments, has the same ID's as the 28x. Remove the duplicated ID's from the device tables, and expand the comment to document this. Signed-off-by: NBen Collins <ben.collins@canonical.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Benny Halevy 提交于
This fixes the compiler warning. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
fix interrupt transfer interval for Full/Low speed device. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
fix the problem that did not set IRQF_TRIGGER_ flag. Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ming Lei 提交于
This patch renames the existing usb_reset_device in hub.c to usb_reset_and_verify_device and renames the existing usb_reset_composite_device to usb_reset_device. Also the new usb_reset_and_verify_device does't need to be EXPORTED . The idea of the patch is that external interface driver should warn the other interfaces' driver of the same device before and after reseting the usb device. One interface driver shoud call _old_ usb_reset_composite_device instead of _old_ usb_reset_device since it can't assume the device contains only one interface. The _old_ usb_reset_composite_device is safe for single interface device also. we rename the two functions to make the change easily. This patch is under guideline from Alan Stern. Signed-off-by: NMing Lei <tom.leiming@gmail.com>
-
由 Andre Haupt 提交于
fix the following sparse warning: drivers/usb/serial/usb-serial.c:927:43: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/usb-serial.c:927:43: expected unsigned int *minor drivers/usb/serial/usb-serial.c:927:43: got int *<noident> CHECK drivers/usb/serial/generic.c Signed-off-by: NAndre Haupt <andre@bitwigglers.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Nate Case 提交于
This adds support for hardware configurations that don't match the chip default register settings (e.g., 16-bit data bus, DACK and DREQ pulled up instead of down, analog overcurrent mode). These settings are passed in via the OF device tree. The PCI interface still assumes the same default values. Signed-off-by: NNate Case <ncase@xes-inc.com> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ming Lei 提交于
It is the usb interface driver probe() methods that can't call usb_set_configuration, not usb device driver. Signed-off-by: NMing Lei <tom.leiming@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1103) changes the iteration in the USB scatter-gather to use a standard SG iterator. Otherwise the iteration will fail if it encounters a chained SG list. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NJens Axboe <jens.axboe@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ming Lei 提交于
From the current implementation of usb_reset_composite_device function, the iface parameter is no longer useful. This function doesn't do something special for the iface usb_interface,compared with other interfaces in the usb_device. So remove the parameter and fix the related caller. Signed-off-by: NMing Lei <tom.leiming@gmail.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Christophe Jaillet 提交于
Remove an explicit memset(.., 0, ...) to a variable allocated with kzalloc (i.e. 'card_info' array of the structure 'instance'). Signed-off-by: NChristophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
- fixes an error with filling out control requests - increases grepability and error logging - fixes the short read code path Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This driver is only for one device id, and the option driver should be used instead for it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ming Lei 提交于
mark this array as const because it is read-only Signed-off-by: NMing Lei <tom.leiming@gmail.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ming Lei 提交于
Mark the tables as const so that they end up in .rodata section and don't cacheline share with things that get written to. Signed-off-by: NMing Lei <tom.leiming@gmail.com> Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1102) clarifies two points in the USB Gadget kerneldoc: Request completion callbacks are always made with interrupts disabled; Device controllers may not support STALLing the status stage of a control transfer after the data stage is over. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Felipe Balbi 提交于
General cleanup on ir-usb module. Introduced a common header that could be used also on usb gadget framework. Lot's of cleanups and now using macros from the header file. Signed-off-by: NFelipe Balbi <me@felipebalbi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This patch fixes some performance bugs observed with some workloads when unlinking EHCI queue header (QH) descriptors from the async ring (control/bulk schedule). The mechanism intended to defer unlinking an empty QH (so there is no penalty in common cases where it's quickly reused) was not working as intended. Sometimes the unlink was scheduled: - too quickly ... which can be a *strong* negative effect, since that QH becomes unavailable for immediate re-use; - too slowly ... wasting DMA cycles, usually a minor issue except for increased bus contention and power usage; Plus there was an extreme case of "too slowly": a logical error in the IAA watchdog-timer conversion meant that sometimes the unlink never got scheduled. The fix replaces a simple counter with a timestamp derived from the controller's 8 KHz microframe counter, and adjusts the timer usage for some issues associated with HZ being less than 8K. (Based on a patch originally by Alan Stern, and good troubleshooting from Leonid.) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Leonid <leonidv11@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Felipe Balbi 提交于
We can't allow hubs on the 7th tier as they would allow devices on the 8th tier. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
If we do rmmod ohci_hcd while an application is doing something, the following may happen: - a control URB completes (in finish_urb) and the ohci's endpoint is set into ED_UNLINK in ed_deschedule - same URB is (re)submitted because of the open/close loop or other such application behaviour - rmmod sets the state to HC_STATE_QUESCING - finish_unlinks happens at next SOF; normally it would set ed into ED_IDLE and immediately call ed_schedule (since URB had extra TDs queued), which sets it into ED_OPER. But the check in ed_schedule makes it fail with -EAGAIN (which is ignored) - from now on we have a dead URB stuck; it cannot even be unlinked because the ed status is not ED_OPER, and thus start_ed_unlink is not invoked. This patch removes the check. In 2.6.25, all callers check for __ACTIVE bit before invoking ed_schedule, which is more appropriate. Alan Stern and David Brownell approved of this (cautiously). Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-