- 07 10月, 2005 27 次提交
-
-
由 Takashi Iwai 提交于
HDA Codec driver Fixed the confliction of capture controls on ALC880 'test' model. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 John W. Linville 提交于
HDA Codec driver Mark the ALC882 'LFE Playback Switch' as an input, like the other playback switch settings. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 John W. Linville 提交于
HDA Codec driver Fix a typo (cut & paste) in the alc880_test_mixer structure. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 John W. Linville 提交于
HDA Codec driver The ALC260 'Mono Playback Switch' is marked as an output in patch_realtek.c. It actually does not work unless it is marked as an input. Go figure... This was tested and confirmed on an HP xw4300. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
USB generic driver Increase the maximum PCM buffer size to 1 MB. The USB driver doesn't have any inherent buffer size limit, and big multichannel interfaces may benefit from this. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver There is another revision of the PHASE26 with a different product ID; add a quirk entry for that, too. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
USB generic driver Add quirk entries for four unknown Yamaha USB MIDI devices. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
PPC PMAC driver Added the support of iBook 1.33GHz. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
USB generic driver Add a quirk entry for the Roland RD-700SX. This should work for the RD-300SX, too. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
VIA82xx driver Added a dxs whitelist entry for an ECS mobo. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Nicolas Pitre 提交于
AC97 Codec A single call to the driver suspend/resume method for each device is enough. The level and SUSPEND_*/RESUME_* arguments are deprecated and said to be removed eventually anyway (no other subsystem are using them anymore except platform devices). Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Nicolas Pitre 提交于
AC97 Codec Don't use dev.platform_data to store a reference to the containing ac97_t structure. Such assignment is redundent since we can deduce the ac97_t structure location from the contained device structure. This sets platform_data free for other purposes. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Nicolas Pitre 提交于
AC97 Codec The bus_id is initialized with a generic identifier string which is not really useful for proper driver matching. Let the driver decide what it needs via its probe method instead. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
USB generic driver Add a quirk entry for the Hercules DJ Console to ignore timeouts on some mixer control transfers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Dirk Opfer 提交于
ARM PXA2XX driver Fix pm_message_t in PXA2XX-AC97 driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Disable the auto-correction of DMA position temporarily. It doesn't work as expected yet... Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Khapyorsky 提交于
HDA generic driver This creates 'empty' hda generic for unknown MFG-only codecs. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Khapyorsky 提交于
AC97 Codec No index is templated for si3036 modem controls. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sasha Khapyorsky 提交于
AC97 Codec No index is templated for mdoem controls. Signed-off-by: NSasha Khapyorsky <sashak@smlink.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Ritz 提交于
OPL3SA2 driver Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
The nameidata "last.name" is always allocated with "__getname()", and should always be free'd with "__putname()". Using "putname()" without the underscores will leak memory, because the allocation will have been hidden from the AUDITSYSCALL code. Arguably the real bug is that the AUDITSYSCALL code is really broken, but in the meantime this fixes the problem people see. Reported by Robert Derr, patch by Rick Lindsley. Acked-by: NAl Viro <viro@ftp.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Bryan Sutula 提交于
I've noticed a kernel hang during a storm of CMC interrupts, which was tracked down to the continual execution of the interrupt handler. There's code in the CMC handler that's supposed to disable CMC interrupts and switch to polling mode when it sees a bunch of CMCs. Because disabling CMCs across all CPUs isn't safe in interrupt context, the disable is done with a schedule_work(). But with continual CMC interrupts, the schedule_work() never gets executed. The following patch immediately disables CMC interrupts for the current CPU. This then allows (at least) one CPU to ignore CMC interrupts, execute the schedule_work() code, and disable CMC interrupts on the rest of the CPUs. Acked-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NBryan Sutula <Bryan.Sutula@hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
- 06 10月, 2005 9 次提交
-
-
由 Russell King 提交于
drivers/mfd/ucb1x00-core.c:555: error: static declaration of 'ucb1x00_class' follows non-static declaration drivers/mfd/ucb1x00.h:109: error: previous declaration of 'ucb1x00_class' was here Since ucb1x00_class isn't used by anything, remove the extern declaration and the symbol export. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David S. Miller 提交于
By allocating early memory for the firmware page tables, we can write over the beginning of the initrd image. So what we do now is: 1) Read in firmware translations table while still on the firmware's trap table. 2) Switch to Linux trap table. 3) Init bootmem. 4) Build firmware page tables using __alloc_bootmem(). And this keeps the initrd from being clobbered. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas There is no reason to not allow these config options. They are useful when the hardware has problems. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Martin Habets 提交于
Remove some duplicated items due to the inclusion of the general drivers/Kconfig file. These are now taken from drivers/char/Kconfig, and can be turned off there as well (which is desirable sometimes). Signed-off-by: NMartin Habets <errandir_news@mph.eclipse.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Since changeset 98a82feb AX.25 is passing received IP and ARP packets to the stack through netif_rx() but we don't set the skb->mac.raw to right value which may result in a crash with applications that use a packet socket. Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Here is a patch that adds a helper called xfrm_policy_id2dir to document the fact that the policy direction can be and is derived from the index. This is based on a patch by YOSHIFUJI Hideaki and 210313105@suda.edu.cn. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Timer set up by pneigh_enqueue() ended up calling ndisc_rcv() via pndisc_redo(), which clears LOCALLY_ENQUEUED flag in NEIGH_CB(skb) and NS was queued again. Let's call ndisc_recv_ns() directly to avoid the loop. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Missing parenthesis in causes BIC to be slow in increasing congestion window. Spotted by Injong Rhee. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan Zheng 提交于
Signed-Off-By: NYan Zheng <yanzheng@21cn.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2005 4 次提交
-
-
由 Dave Jones 提交于
Just enables some extra printk's, but still.. Only the sysadmin should be able to do that. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Older Macs which uses the VIA chip timers to calibrate the timebase used some code that wouldn't work if HZ wasn't divisible by 100... This fixes it at least for 250. Not totally perfect but should be enough for now (so it at least works with the default value which is now 250). There is still a potential issue with the core using CLOCK_TICK_RATE to maintain xtime and CLOCK_TICK_RATE value on ppc32 is pure crap, but that is a different problem, this patch at least brings us back to our previous situation. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
If we switch extern inline to static inline, we'd better switch the pre-declarations we use to say that these puppies have __attribute_const__ on them. Otherwise we get extern declaration followed by static inline one. Which makes gcc unhappy, and for a good reason... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix implicit nocast warnings in xfrm code: net/xfrm/xfrm_policy.c:232:47: warning: implicit cast to nocast type Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-