Fold lines longer than 80 characters
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Makes the code a bit more readable, and solves quite a few checkpatch
warnings of lines longer than 80 characters.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Break big functions up by using a number of smaller helper
function. Solves some of the over 80 lines warnings, by reducing the
indentation level.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid multiple assignments
Comparisons should place the constant on the right side of the test
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the extra blank lines, add one in where recommended.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use net style comment blocks, and wrap one block with long lines.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With more drivers being added, it is time to sort the drivers to
impose some order.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the function assigned to .ndo_set_vf_mac, check the validity of the
vfidx argument before proceeding to tell the firmware to set the VF MAC
address.
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDerek Chickles <derek.chickles@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When multiple liquidio NICs are plugged in, the first insmod of the PF
driver succeeds.  But after an rmmod, a subsequent insmod fails.  Reason is
during rmmod, the PF driver resets the Octeon of only one of the NICs; it
neglects to reset the Octeons of the other NICs.

Fix the insmod failure by adding the missing Octeon resets at rmmod.  Keep
a per-NIC refcount that indicates the number of active PFs in a given NIC.
When the refcount goes to zero, then reset the Octeon of that NIC.
Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A dsa_switch_tree instance holds a dsa_switch pointer and a port index
to identify the switch port to which the CPU is attached.

Now that the DSA layer has a dsa_port structure to hold this data, use
it to point the switch CPU port.

This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and
s/dst->cpu_port/dst->cpu_dp->index/.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In virtual mode, packets are classified to FIDs based on their ingress
port and VLAN whereas in non-virtual mode only the VLAN is taken into
account.

Currently ports are initialized to use virtual mode due to the presence
of the PVID vPort. However, we're going to transition ports between both
modes based on the FIDs they use and not merely based on the presence on
a VLAN upper. Therefore, during initialization, no mode will be
explicitly set.

Since the Programmer's Reference Manual (PRM) doesn't specify a default,
explicitly set the port to non-virtual mode and later transition the
port between both modes based on the FIDs it uses.

In a follow-up patchset, this step will be moved to the common FID core
where it logically belongs.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PVID is a port attribute and should therefore reside in the main driver
file and not the switchdev specific one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We no longer batch VLAN operations, so there's no need to set the
learning state for a range of VLANs.

Use a common function to set the learning state for a Port-VLAN, thereby
making the code saner more receptive for upcoming changes.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simplify the code by using the common function that sets an STP state
for a Port-VLAN and remove the existing one that tries to batch it for
several VLANs.

This will help us in a follow-up patchset to introduce a unified
infrastructure for bridge ports, regardless if the bridge is VLAN-aware
or not.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

switchdev's VLAN object has the ability to describe a range of VLAN IDs,
but this is only used when VLAN operations are done using the SELF flag,
which is something we would like to remove as it allows one to bypass
the bridge driver.

Do VLAN operations on a per-VLAN basis, thereby simplifying the code and
preparing it for refactoring in a follow-up patchset.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 97c24290 ("switchdev: Execute bridge ndos only for
bridge ports") switchdev code checks that port is bridged, so no need to
perform the same check in the driver.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The router interfaces (RIFs) array is currently initialized together
with the general router configuration. However, in a follow-up patchset
we're going to introduce a common RIF core that will require us to
initialize more RIF constructs, so move the RIF initialization to its
own function.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The FIB notification block logically belongs inside the router specific
struct, so move it there.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The router interfaces (RIFs) array is of no interest to code outside the
routing realm, so declare it inside the router specific struct instead
of the chip-wide one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some attributes in the global chip struct are only relevant for bridge
operation, so encapsulate them in their own struct that isn't exposed to
non-bridge code.

This will also help us later, when we add more bridge-specific
attributes.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a similar fashion to previous patch, the router structure
('mlxsw_sp_router') doesn't need to be accessible to anyone, but the
router code located at spectrum_router.c

Make this apparent and reduce its scope by defining it there.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The shared buffer structure ('mlxsw_sp_sb') doesn't need to be
accessible to anyone, but the shared buffer code located at
spectrum_buffers.c

Make this apparent and reduce its scope by defining it there.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When is_kdump_kernel() is true, reduce memory footprint of
cxgb4 by using a single "Queue Set".
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit fa8cddaf ("net phylib: Remove unnecessary condition check in phy")
removed the only place where the PHY flag PHY_HAS_MAGICANEG was
checked. But it left the flag being set in the drivers. Remove the flag.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is inline function to test if carrier present,
so it makes open-coded solution redundant.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Given that our rings are always a power of 2, we can simplify the
calculation of number of completed TX descriptors by using masking
instead of if statement based on whether the index have wrapped
or not.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have a number of places where we calculate the descriptor
index based on a value which may have overflown.  Create a
macro for masking with the ring size.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since XDP TX ring holds "spare" RX buffers anyway, we don't have to
rush the completion.  We can wait until ring fills up completely
before trying to reclaim buffers.  If RX poll has ended an no
buffer has been queued for XDP TX we have no guarantee we will see
another interrupt, so run the reclaim there as well, to make sure
TX statistics won't become stale.

This should help us reclaim more buffers per single queue controller
register read.

Note that the XDP completion is very trivial, it only adds up
the sizes of transmitted frames for statistics so the latency
spike should be acceptable.  In case user sets the ring sizes
to something crazy, limit the completion to 2k entries.

The check if the ring is empty at the beginning of xdp_complete()
is no longer needed - the callers will perform it.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce NFP_NET_CFG_CTRL_CSUM_COMPLETE capability and implement parsing
of CHECKSUM_COMPLETE metadata.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NEdwin Peer <edwin.peer@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ABI version 4 introduced metadata chaining. Using the ABI version to signal
metadata chaining precludes firmware that advertises new capabilities which
rely on prepended metadata from working on older kernels.

Capability bits are thus better suited to signalling the chained metadata
format. A new version of the RSS capability is introduced to distinguish
between the differing metadata formats for ABI versions other than 4.
Signed-off-by: NEdwin Peer <edwin.peer@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even if capability for RSS and IRQ moderation are present we may
have not initialized them for control vNIC.  Depend on selected
features mask (ctrl) rather than capabilities (cap) to determine
which features should be enabled.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware advertising the LSO2 capability exploits driver provided L3 and L4
offsets in order to avoid parsing packet headers in the TX path. The vlan
field in struct nfp_net_tx_desc is repurposed, making TXVLAN a mutually
exclusive configuration to LSO2.
Signed-off-by: NEdwin Peer <edwin.peer@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The l4_offset field referred to by NFD is confusingly named. It is not the
offset of the L4 transport header, but rather the L4 payload.

The LSO2 capability supported by alternative device firmware requires
the actual L4 offset, thus the rename seems prudent.
Signed-off-by: NEdwin Peer <edwin.peer@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We advertise TSO to the stack but leave it disabled by default.
Make sure it's not only disabled in the netdev features but
also on the device itself.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On the SPARC platform we need to use the DMA_ATTR_WEAK_ORDERING attribute
in our Rx path dma mapping in order to get the expected performance out
of the receive path.  Adding it to the Tx path has little effect, so
that's not a part of this patch.
Signed-off-by: NShannon Nelson <shannon.nelson@oracle.com>
Reviewed-by: NTushar Dave <tushar.n.dave@oracle.com>
Reviewed-by: NTom Saeger <tom.saeger@oracle.com>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Prefetch buffer cleanup code was called twice, causing EDAC to
report errors during reboot.

[ 1130.972475] xgene-edac 78800000.edac: IOB bridge agent (BA) transaction
error
[ 1130.979584] xgene-edac 78800000.edac: IOB BA write response error
[ 1130.985648] xgene-edac 78800000.edac: IOB BA write access at 0x00.00000000
()
[ 1130.993612] xgene-edac 78800000.edac: IOB BA requestor ID 0x00002400
[ 1131.000242] xgene-edac 78800000.edac: IOB bridge agent (BA) transaction
error
...

This patch fixes the errors by,

- removing the redundant prefetch buffer cleanup from port_ops->shutdown()
- moving port_ops->shutdown() after delete_rings()
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds workaround for HW errata 10GE_10 and ENET_15:
"HW statistic counters value are duplicated".

- RFCS duplicates RALN counter
- RFLR duplicates RUND counter
- TFCS duplicates TFRG counter
- RALN should be intepreted as 0 in 10G mode
Signed-off-by: NQuan Nguyen <qnguyen@apm.com>
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds statistic counter for frames recovered from HW errata
10GE_8 and ENET_11:
"HW reports Length error for valid 64 byte frames with len <46 bytes".
Signed-off-by: NQuan Nguyen <qnguyen@apm.com>
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>