It has been seen that the newer SoCs have a different TX FIFO
address. Add this to the quirks structure.
Signed-off-by: NMarcus Cooper <codekipper@gmail.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

The newer SoCs have a larger range than the original SoC that this
driver was developed for. By adding the regmap config to the quirks
then the driver can initialise the managed register map correctly.
Signed-off-by: NMarcus Cooper <codekipper@gmail.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

The BCLKDIV and MCLKDIV found on newer SoCs start from an offset of 1.
Add the functionality to adjust the division values according to the
needs to the device being used.
Signed-off-by: NMarcus Cooper <codekipper@gmail.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Declare snd_soc_codec_driver structures as const as they are either
passed as an argument to the function snd_soc_register_codec or stored as
reference in field codec of type sun4i_codec_quirks. Both the fucntion
argument and the codec field are of type const, so declare the
structures with this property as const.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In preparation for the changes required to support newer SoCs then
quirks has been moved and also added to the device structure.
Signed-off-by: NMarcus Cooper <codekipper@gmail.com>
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Commit a53e35db ("reset: Ensure drivers are explicit when requesting
reset lines") started to transition the reset control request API calls
to explicitly state whether the driver needs exclusive or shared reset
control behavior. Convert all drivers requesting exclusive resets to the
explicit API call so the temporary transition helpers can be removed.

No functional changes.

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

This structure is only stored in the ops field of a snd_soc_dai_driver
structure. That field is declared const, so snd_soc_dai_ops structures
that have this property can be declared as const also.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The gpiod API checks for NULL descriptors, so there is no need to
duplicate the check in the driver.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For driver debugfs, debugfs_remove_recursive() is called which is not
needed as it is already done in ASoC core debugfs. And a device managed
memory need not be freed explicitly as device core frees it up. So
remove unnecessary skl_debugfs_exit().

Fixes: 5cdf6c09 ASoC: ("Intel: Skylake: Add debugfs support")
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Commit bdd0384a ("ASoC: Intel: Skylake: Add support to read firmware
registers") introduced firmware register read so added sst-dsp-priv.h but
missed adding sst-dsp.h as that leads to below compiler warning:

   In file included from sound/soc/intel/skylake/skl-debug.c:23:0:
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
'struct sst_pdata' declared inside parameter list [enabled by default]
     int (*init)(struct sst_dsp *sst, struct sst_pdata *pdata);
                                             ^
>> sound/soc/intel/skylake/../common/sst-dsp-priv.h:63:42: warning:
its scope is only this definition or declaration, which is probably
not what you want [enabled by default]

So add the missing header.

Fixes: bdd0384a ("ASoC: Intel: Skylake: Add support to read firmware registers")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds debugfs support to read fw registers, mailbox
offsets and sram address.
Signed-off-by: NMousumi Jana <mousumix.jana@intel.com>
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NPardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SRAM address and memory window size differ for different platforms.
So add members to sst_addr structure and initialize them in the
respective dsp_init().
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Driver modules have lot of information represented in struct
skl_module_cfg. Knowing this is useful for debug, so enable
debugfs for this structure.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For debug, the kernel debugfs mechanism is available. We can add various
debug options for driver like module configuration read, firmware register
read etc.

This patch adds debugfs as a child to asoc plaform component and caller is
added for skylake driver to do init and cleanup of debugfs.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NVunny Sodhi <vunnyx.sodhi@intel.com>
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

sound/soc/soc-core.c:1961:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 98faf436 ("ASoC: Drop invalid DMI fields when setting card long name from DMI info")
CC: Mengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For making the development easier, add quirk module option to override
the platform data setup.  For example, a platform with inverted jack
detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 =
jd_mode=2).  It overrides the whole pdata fields, so pass it
carefully.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Tested-by: NJames Cameron <quozl@laptop.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

Don't populate the arrays path and cmd_case on the stack but make
them static const.  Makes the object code smaller:

Before:
   text    data     bss     dec     hex filename
   2673     624       0    3297     ce1 sound/soc/sh/rcar/cmd.o

After:
   text    data     bss     dec     hex filename
   2398     768       0    3166     c5e sound/soc/sh/rcar/cmd.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

It's very common that audio card has a machine level amplifier which is
controlled by GPIO.  The patch adds DAPM widgets and routing support
into audio-graph-card driver, and creates an output driver widget with
event to control the amplifier via GPIO.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We will set some volatile registers in jack detection function. But
those volatile registers will be clear in rt5665_calibrate function
because we set cache bypass and reset codec in rt5665_calibrate function.
This patch add a flag to make sure that rt5665_calibrate is done
before starting jack detection.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   8172	    920	      0	   9092	   2384	sound/soc/sh/rcar/core.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   8364	    728	      0	   9092	   2384	sound/soc/sh/rcar/core.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The property type of "nuvoton,crosstalk-bypass" changes to boolean.
The document is updated as well.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NJohn Hsu <supercraig0719@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The first parameter is codec not dai.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add some DAPM widget types to better support the construction of DAPM
graphs within DSPs.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Makes the debug output much more useful.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SND_SOC_TPLG_INDEX_ALL is used by drivers to tell the core to load
all topology component indexes, not just the index in the header.
Fix this so that SND_SOC_TPLG_INDEX_ALL will load all components no matter
their index.
Signed-off-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Don't populate the arrays fs_list and ps_list on the stack but make
them static const.  Makes the object code smaller:

Before:
   text    data     bss     dec     hex filename
  12084    4888      64   17036    428c sound/soc/codecs/ak4642.o

After:
   text    data     bss     dec     hex filename
  11883    5032      64   16979    4253 sound/soc/codecs/ak4642.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch is uploaded for enabling the speaker protection features
of the audio codec.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

These MUXes are unexisting. So, remove them.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Move set_sysclk to codec level and people can use it at both
codec and dai level.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

{ "ADC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll }, and
{ "ADC Stereo2 Filter", NULL, "PLL1", is_sys_clk_from_pll }, are
defined twice in the driver.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When we select "IF1_ADC4" for IF1 ADC Muxes, it is actually connected
to "TxDP_ADC" widget. This patch fixes the audio route and remove the
unexisting "IF1_ADC4" widget.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add debug message for crosstalk function bypass.
Signed-off-by: NJohn Hsu <KCHSU0@nuvoton.com>
Signed-off-by: NJohn Hsu <supercraig0719@gmail.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Added quirk DW_I2S_QUIRK_16BIT_IDX_OVERRIDE to Designware
driver. This quirk will set idx value to 1.

By setting this quirk, it will override supported format
as 16 bit resolution and bus width as 2 Bytes.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NVijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

jd mode 2 (3.3V) is required apparently

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Lenovo platforms use RT5670 with Baytrail, add the required
MCLK control and configuration to 19.2MHz

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Sometimes DMI fields may be invalid and so can't give useful vendor,
product or board info, such as "Type2 - Board Manufacturer" or
"Type1 - TBD by OEM". Including such invalid DMI fileds may create silly
card long name. So this patch creates a black list of invalid strings.
And if a DMI field contains any string in this list, it will be excluded
from the card long name.
Signed-off-by: NMengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This line was accidentally indented too far.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The timer may still be running when rt5645_i2c_remove() gets called,
call del_timer_sync() to make sure it is stopped.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

GPD Win requires jd_mode=3 and the inverted flag for making the jack
detection working.  Unfortunately, the BIOS doesn't give a nice way to
match with DMI strings, and the only working way so far is to match
with the board vendor/name/version/date to some known patterns.

Hopefully other vendors won't do such a stupid setup, too...

Thanks to Hans de Goede for the DMI matching suggestion.
Suggested-by: NHans de Goede <hdegoede@redhat.com>
Tested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>