No functional changes. Preparation to simplify the review of the next
change. Just reorder the code in arch_uprobe_pre/post_xol() functions
so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end.

Also change arch_uprobe_pre_xol() to use utask instead of autask, to
make the code more symmetrical with arch_uprobe_post_xol().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NJim Keniston <jkenisto@us.ibm.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to
the closely related handle_riprel_insn(). This way it is simpler to
read and understand this code, and this lessens the number of ifdef's.

While at it, update the comment in handle_riprel_post_xol() as Jim
suggested.

TODO: rename them somehow to make the naming consistent.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NJim Keniston <jkenisto@us.ibm.com>

Kill the "mm->context.ia32_compat" check in handle_riprel_insn(), if
it is true insn_rip_relative() must return false. validate_insn_bits()
passed "ia32_compat" as !x86_64 to insn_init(), and insn_rip_relative()
checks insn->x86_64.

Also, remove the no longer needed "struct mm_struct *mm" argument and
the unnecessary "return" at the end.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NJim Keniston <jkenisto@us.ibm.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

No functional changes, preparation.

Shift the code from prepare_fixups() to arch_uprobe_analyze_insn()
with the following modifications:

	- Do not call insn_get_opcode() again, it was already called
	  by validate_insn_bits().

	- Move "case 0xea" up. This way "case 0xff" can fall through
	  to default case.

	- change "case 0xff" to use the nested "switch (MODRM_REG)",
	  this way the code looks a bit simpler.

	- Make the comments look consistent.

While at it, kill the initialization of rip_rela_target_address and
->fixups, we can rely on kzalloc(). We will add the new members into
arch_uprobe, it would be better to assume that everything is zero by
default.

TODO: cleanup/fix the mess in validate_insn_bits() paths:

	- validate_insn_64bits() and validate_insn_32bits() should be
	  unified.

	- "ifdef" is not used consistently; if good_insns_64 depends
	  on CONFIG_X86_64, then probably good_insns_32 should depend
	  on CONFIG_X86_32/EMULATION

	- the usage of mm->context.ia32_compat looks wrong if the task
	  is TIF_X32.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NJim Keniston <jkenisto@us.ibm.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

UPROBE_COPY_INSN, UPROBE_SKIP_SSTEP, and uprobe->flags must die. This
patch kills UPROBE_SKIP_SSTEP. I never understood why it was added;
not only it doesn't help, it harms.

It can only help to avoid arch_uprobe_skip_sstep() if it was already
called before and failed. But this is ugly, if we want to know whether
we can emulate this instruction or not we should do this analysis in
arch_uprobe_analyze_insn(), not when we hit this probe for the first
time.

And in fact this logic is simply wrong. arch_uprobe_skip_sstep() can
fail or not depending on the task/register state, if this insn can be
emulated but, say, put_user() fails we need to xol it this time, but
this doesn't mean we shouldn't try to emulate it when this or another
thread hits this bp next time.

And this is the actual reason for this change. We need to emulate the
"call" insn, but push(return-address) can obviously fail.

Per-arch notes:

	x86: __skip_sstep() can only emulate "rep;nop". With this
	     change it will be called every time and most probably
	     for no reason.

	     This will be fixed by the next changes. We need to
	     change this suboptimal code anyway.

	arm: Should not be affected. It has its own "bool simulate"
	     flag checked in arch_uprobe_skip_sstep().

	ppc: Looks like, it can emulate almost everything. Does it
	     actually need to record the fact that emulate_step()
	     failed? Hopefully not. But if yes, it can add the ppc-
	     specific flag into arch_uprobe.

TODO: rename arch_uprobe_skip_sstep() to arch_uprobe_emulate_insn(),
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: NDavid A. Long <dave.long@linaro.org>
Reviewed-by: NJim Keniston <jkenisto@us.ibm.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core

Pull perf/core improvements and fixes from Jiri Olsa:

User visible changes:

  * Add --percentage option to control absolute/relative percentage output (Namhyung Kim)

Plumbing changes:

  * Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by completion scripts (Ramkumar Ramachandra)
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1394853474-31019-5-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1394853474-31019-4-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1394853474-31019-3-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1394853474-31019-2-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

Now perf report will show absolute percentage on filter entries by
default.
Suggested-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-8-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Add 'F' hotkey to toggle relative and absolute percentage of filtered
entries.
Suggested-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-7-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Add hist.percentage option for setting default value of the
symbol_conf.filter_relative.  It affects the output of various perf
commands (like perf report, top and diff) only if filter(s) applied.

An user can write .perfconfig file like below to show absolute
percentage of filtered entries by default:

  $ cat ~/.perfconfig
  [hist]
  percentage = absolute

And it can be changed through command line:

  $ perf report --percentage relative
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-6-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The --percentage option is for controlling overhead percentage
displayed.  It can only receive either of "relative" or "absolute" and
affects -c delta output only.

For more information, please see previous commit same thing done to
"perf report".
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-5-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The --percentage option is for controlling overhead percentage
displayed.  It can only receive either of "relative" or "absolute".
Move the parser callback function into a common location since it's
used by multiple commands now.

For more information, please see previous commit same thing done to
"perf report".
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-4-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The --percentage option is for controlling overhead percentage
displayed.  It can only receive either of "relative" or "absolute".

"relative" means it's relative to filtered entries only so that the
sum of shown entries will be always 100%.  "absolute" means it retains
the original value before and after the filter is applied.

  $ perf report -s comm
  # Overhead       Command
  # ........  ............
  #
      74.19%           cc1
       7.61%           gcc
       6.11%            as
       4.35%            sh
       4.14%          make
       1.13%        fixdep
  ...

  $ perf report -s comm -c cc1,gcc --percentage absolute
  # Overhead       Command
  # ........  ............
  #
      74.19%           cc1
       7.61%           gcc

  $ perf report -s comm -c cc1,gcc --percentage relative
  # Overhead       Command
  # ........  ............
  #
      90.69%           cc1
       9.31%           gcc

Note that it has zero effect if no filter was applied.
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-3-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

When filtering by thread, dso or symbol on TUI it also update total
period so that the output shows different result than no filter - the
percentage changed to relative to filtered entries only.  Sometimes
this is not desired since users might expect same results with filter.

So new filtered_* fields to hists->stats to count them separately.
They'll be controlled/used by user later.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1397145720-8063-2-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Conflicts:
	tools/perf/bench/numa.c

Pull perf fixes from Jiri Olsa.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pick up the latest fixes.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

perf stat did initialize the stats structure used to compute
stddev etc. incorrectly. It merely zeroes it. But one member
(min) needs to be set to a non zero value. This causes min
to be not computed at all. Call init_stats() correctly.

It doesn't matter for stat currently because it doesn't use
min, but it's still better to do it correctly.

The other users of statistics are already correct.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1395768699-16060-1-git-send-email-andi@firstfloor.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Currently,

  $ perf bench numa mem

errors out with usage information. To make this more user-friendly, let
us provide a minimum set of default values required for a test
run. As an added bonus,

  $ perf bench all

now goes all the way to completion.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395964219-22173-2-git-send-email-artagnon@gmail.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>

At the end of

  $ perf bench all

the program segfaults because it attempts to dereference a NULL
pointer. Fix this fault.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395964219-22173-4-git-send-email-artagnon@gmail.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395964219-22173-3-git-send-email-artagnon@gmail.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The dwarf_getcfi() only checks .debug_frame section for CFI, but as
most binaries only have .eh_frame it'd return NULL and it makes
some variables inaccessible.

Using dwarf_getcfi_elf (along with dwarf_getelf()) allows to show and
add probe to more variables.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1396854348-9296-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

As Namhyung reported(https://lkml.org/lkml/2014/4/1/89),
current perf-probe -L option doesn't handle errors in line-range
searching correctly. It causes a SEGV if an error occured in the
line-range searching.

  ----
  $ perf probe -x ./perf -v -L map__load
  Open Debuginfo file: /home/namhyung/project/linux/tools/perf/perf
  fname: util/map.c, lineno:153
  New line range: 153 to 2147483647
  path: (null)
  Segmentation fault (core dumped)
  ----

This is because line_range_inline_cb() ignores errors
from find_line_range_by_line() which means that lr->path is
already freed on the error path in find_line_range_by_line().
As a result, get_real_path() accesses the lr->path and it
causes a NULL pointer exception.

This fixes line_range_inline_cb() to handle the error correctly,
and report it to the caller.

Anyway, this just fixes a possible SEGV bug, Namhyung's patch
is also required.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140402054831.19080.27006.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The commit 5a62257a ("perf probe: Replace line_list with
intlist") replaced line_list to intlist but it has a problem that if a
same line was added again, it'd return -EEXIST rather than 1.

Since line_range_walk_cb() only checks the result being negative, it
resulted in failure or segfault sometimes.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1396327677-3657-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>

The Makefile logic sets FEATURE_CHECKS_CFLAGS-libdw-dwarf-unwind and
FEATURE_CHECKS_LDFLAGS-libdw-dwarf-unwind only if LIBDW_DIR is
defined. This means that under a normal setup,

  $ make NO_LIBUNWIND=1

won't automatically pick up libdw. Fix this.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NJean Pihet <jean.pihet@linaro.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395873845-466-1-git-send-email-artagnon@gmail.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>

Leaving ghostprotocols.net for old networking stuff.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jott6d40nkjjc3vvh3vw53lp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

I.e. do the same as when NO_LIBELF is explicitely passed in the 'make'
command line, fixing this:

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...     DWARF post unwind library: libdw
<SNIP>
    CC       /tmp/build/perf/util/symbol-minimal.o
    CC       /tmp/build/perf/util/unwind-libdw.o
  arch/x86/util/unwind-libdw.c:1:30: fatal error: elfutils/libdwfl.h: No such file or directory
  compilation terminated.
    CC       /tmp/build/perf/tests/keep-tracking.o
  util/unwind-libdw.c:2:28: fatal error: elfutils/libdw.h: No such file or directory
  compilation terminated.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e39j1yxanltjx4t0msse63ax@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

The patch 3a3ffa2e ("tools lib traceevent: Report better error
message on bad function args") added the error message but it seems
there's no reason to call warning() directly.

So change it to do_warning_event() to provide event information too.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1395192174-26273-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

It's sometimes useful to know where the parse failure was occurred.  Add
do_warning_event() macro to see the failing event.

It now shows the messages like below:

  $ perf test 5
   5: parse events tests                                     :  Warning: [kvmmmu:kvm_mmu_get_page] bad op token {
    Warning: [kvmmmu:kvm_mmu_sync_page] bad op token {
    Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token {
    Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token {
    Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined
    Warning: [xen:xen_mmu_ptep_modify_prot_commit] function sizeof not defined
    Warning: [xen:xen_mmu_ptep_modify_prot_start] function sizeof not defined
    Warning: [xen:xen_mmu_set_pgd] function sizeof not defined
    Warning: [xen:xen_mmu_set_pud] function sizeof not defined
    Warning: [xen:xen_mmu_set_pmd] function sizeof not defined
    ...
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1395192174-26273-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

On perf top, the -s option is used for --sort, but the man page
contains invalid documentation of -s option for --sym-annotate.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1395193578-27098-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>

Some versions of gcc even warn about it:

  mm/shmem.c: In function ‘shmem_file_aio_read’:
  mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function

If the loop is aborted during the first iteration by one of the two
first break statements, error will be uninitialized.

Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill
loop over iovec in generic_file_aio_read()").
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On 32 bit, size_t is "unsigned int", not "unsigned long", causing the
following warning when comparing with PAGE_SIZE, which is always "unsigned
long":

  fs/cifs/file.c: In function ‘cifs_readdata_to_iov’:
  fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast

Introduced by commit 7f25bba8 ("cifs_iovec_read: keep iov_iter
between the calls of cifs_readdata_to_iov()"), which changed the
signedness of "remaining" and the code from min_t() to min().
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull slab changes from Pekka Enberg:
 "The biggest change is byte-sized freelist indices which reduces slab
  freelist memory usage:

    https://lkml.org/lkml/2013/12/2/64"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  mm: slab/slub: use page->list consistently instead of page->lru
  mm/slab.c: cleanup outdated comments and unify variables naming
  slab: fix wrongly used macro
  slub: fix high order page allocation problem with __GFP_NOFAIL
  slab: Make allocations with GFP_ZERO slightly more efficient
  slab: make more slab management structure off the slab
  slab: introduce byte sized index for the freelist of a slab
  slab: restrict the number of objects in a slab
  slab: introduce helper functions to get/set free object
  slab: factor out calculate nr objects in cache_estimate

Pull misc kbuild changes from Michal Marek:
 "Here is the non-critical part of kbuild:
   - One bogus coccinelle check removed, one check fixed not to suggest
     the obsolete PTR_RET macro
   - scripts/tags.sh does not index the generated *.mod.c files
   - new objdiff tool to list differences between two versions of an
     object file
   - A fix for scripts/bootgraph.pl"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/coccinelle: Use PTR_ERR_OR_ZERO
  scripts/bootgraph.pl: Add graphic header
  scripts: objdiff: detect object code changes between two commits
  Coccicheck: Remove memcpy to struct assignment test
  scripts/tags.sh: Ignore *.mod.c

This patch fixes I/O errors with the sym53c8xx_2 driver when the disk
returns QUEUE FULL status.

When the controller encounters an error (including QUEUE FULL or BUSY
status), it aborts all not yet submitted requests in the function
sym_dequeue_from_squeue.

This function aborts them with DID_SOFT_ERROR.

If the disk has full tag queue, the request that caused the overflow is
aborted with QUEUE FULL status (and the scsi midlayer properly retries
it until it is accepted by the disk), but the sym53c8xx_2 driver aborts
the following requests with DID_SOFT_ERROR --- for them, the midlayer
does just a few retries and then signals the error up to sd.

The result is that disk returning QUEUE FULL causes request failures.

The error was reproduced on 53c895 with COMPAQ BD03685A24 disk
(rebranded ST336607LC) with command queue 48 or 64 tags.  The disk has
64 tags, but under some access patterns it return QUEUE FULL when there
are less than 64 pending tags.  The SCSI specification allows returning
QUEUE FULL anytime and it is up to the host to retry.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8f619b54 ("powerpc/ppc64: Do not turn AIL (reloc-on
interrupts) too early") added code to set the AIL bit in the LPCR
without checking whether the kernel is running in hypervisor mode.  The
result is that when the kernel is running as a guest (i.e., under
PowerKVM or PowerVM), the processor takes a privileged instruction
interrupt at that point, causing a panic.  The visible result is that
the kernel hangs after printing "returning from prom_init".

This fixes it by checking for hypervisor mode being available before
setting LPCR.  If we are not in hypervisor mode, we enable relocation-on
interrupts later in pSeries_setup_arch using the H_SET_MODE hcall.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commits 11d4616b ("futex: revert back to the explicit waiter
counting code") and 69cd9eba ("futex: avoid race between requeue and
wake") changed some of the finer details of how we think about futexes.
One was a late fix and the other a consequence of overlooking the whole
requeuing logic.

The first change caused our documentation to be incorrect, and the
second made us aware that we need to explicitly add more details to it.
Signed-off-by: NDavidlohr Bueso <davidlohr@hp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>