- 12 1月, 2011 4 次提交
-
-
由 Gleb Natapov 提交于
Guest enables async PF vcpu functionality using this MSR. Reviewed-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Keep track of memslots changes by keeping generation number in memslots structure. Provide kvm_write_guest_cached() function that skips gfn_to_hva() translation if memslots was not changed since previous invocation. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
When page is swapped in it is mapped into guest memory only after guest tries to access it again and generate another fault. To save this fault we can map it immediately since we know that guest is going to access the page. Do it only when tdp is enabled for now. Shadow paging case is more complicated. CR[034] and EFER registers should be switched before doing mapping and then switched back. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
If a guest accesses swapped out memory do not swap it in from vcpu thread context. Schedule work to do swapping and put vcpu into halted state instead. Interrupts will still be delivered to the guest and if interrupt will cause reschedule guest will continue to run another task. [avi: remove call to get_user_pages_noio(), nacked by Linus; this makes everything synchrnous again] Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 02 1月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
The only bit of EFER that affects the mmu is NX, and this is already accounted for (LME only takes effect when changing cr0). Based on a patch by Hillf Danton. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 16 12月, 2010 1 次提交
-
-
由 Avi Kivity 提交于
Based on a patch from Thomas Meyer. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 08 12月, 2010 2 次提交
-
-
由 Joerg Roedel 提交于
To support xsave properly for the guest the SVM module need software support for it. As long as this is not present do not report the xsave as supported feature in cpuid. As a side-effect this patch moves the bit() helper function into the x86.h file so that it can be used in svm.c too. KVM-Stable-Tag. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Sheng Yang 提交于
CPUID's OSXSAVE is a mirror of CR4.OSXSAVE bit. We need to update the CPUID after migration. KVM-Stable-Tag. Signed-off-by: NSheng Yang <sheng@linux.intel.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 06 11月, 2010 3 次提交
-
-
由 Jan Kiszka 提交于
smp_call_function_many is specified to be called only with preemption disabled. Fulfill this requirement. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Vasiliy Kulikov 提交于
Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and kvm_clock_data are copied to userland with some padding and reserved fields unitialized. It leads to leaking of contents of kernel stack memory. We have to initialize them to zero. In patch v1 Jan Kiszka suggested to fill reserved fields with zeros instead of memset'ting the whole struct. It makes sense as these fields are explicitly marked as padding. No more fields need zeroing. KVM-Stable-Tag. Signed-off-by: NVasiliy Kulikov <segooon@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Michael S. Tsirkin 提交于
I have observed the following bug trigger: 1. userspace calls GET_DIRTY_LOG 2. kvm_mmu_slot_remove_write_access is called and makes a page ro 3. page fault happens and makes the page writeable fault is logged in the bitmap appropriately 4. kvm_vm_ioctl_get_dirty_log swaps slot pointers a lot of time passes 5. guest writes into the page 6. userspace calls GET_DIRTY_LOG At point (5), bitmap is clean and page is writeable, thus, guest modification of memory is not logged and GET_DIRTY_LOG returns an empty bitmap. The rule is that all pages are either dirty in the current bitmap, or write-protected, which is violated here. It seems that just moving kvm_mmu_slot_remove_write_access down to after the slot pointer swap should fix this bug. KVM-Stable-Tag. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 24 10月, 2010 29 次提交
-
-
由 Huang Ying 提交于
Now we have MCG_SER_P (and corresponding SRAO/SRAR MCE) support in kernel and QEMU-KVM, the MCG_SER_P should be added into KVM_MCE_CAP_SUPPORTED to make all these code really works. Reported-by: NDean Nelson <dnelson@redhat.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Nicolas Kaiser 提交于
Fix typo in copyright notice. Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
get_kernel_ns() wants preemption disabled. It doesn't make a lot of sense during the get/set ioctls (no way to make them non-racy) but the callee wants it. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
Older gcc versions complain about the improper type (for x86-32), 4.5 seems to fix this silently. However, we should better use the right type initially. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Zachary Amsden 提交于
Negate the effects of AN TYM spell while kvm thread is preempted by tracking conversion factor to the highest TSC rate and catching the TSC up when it has fallen behind the kernel view of time. Note that once triggered, we don't turn off catchup mode. A slightly more clever version of this is possible, which only does catchup when TSC rate drops, and which specifically targets only CPUs with broken TSC, but since these all are considered unstable_tsc(), this patch covers all necessary cases. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zachary Amsden 提交于
This just changes some names to better reflect the usage they will be given. Separated out to keep confusion to a minimum. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zachary Amsden 提交于
The math in kvm_get_time_scale relies on the fact that NSEC_PER_SEC < 2^32. To use the same function to compute arbitrary time scales, we must extend the first reduction step to shrink the base rate to a 32-bit value, and possibly reduce the scaled rate into a 32-bit as well. Note we must take care to avoid an arithmetic overflow when scaling up the tps32 value (this could not happen with the fixed scaled value of NSEC_PER_SEC, but can happen with scaled rates above 2^31. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Mohammed Gamal 提交于
This adds a wrapper function kvm_inject_realmode_interrupt() around the emulator function emulate_int_real() to allow real mode interrupt injection. [avi: initialize operand and address sizes before emulating interrupts] [avi: initialize rip for real mode interrupt injection] [avi: clear interrupt pending flag after emulating interrupt injection] Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
The PIC code used to be called from preempt_disable() context, which wasn't very good for PREEMPT_RT. That is no longer the case, so move back from raw_spinlock_t to spinlock_t. Signed-off-by: NAvi Kivity <avi@redhat.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zachary Amsden 提交于
If preempted after kvmclock values are updated, but before hardware virtualization is entered, the last tsc time as read by the guest is never set. It underflows the next time kvmclock is updated if there has not yet been a successful entry / exit into hardware virt. Fix this by simply setting last_tsc to the newly read tsc value so that any computed nsec advance of kvmclock is nulled. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch moves the detection whether a page-fault was nested or not out of the error code and moves it into a separate variable in the fault struct. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Change the interrupt injection code to work from preemptible, interrupts enabled context. This works by adding a ->cancel_injection() operation that undoes an injection in case we were not able to actually enter the guest (this condition could never happen with atomic injection). Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Instead of blindly attempting to inject an event before each guest entry, check for a possible event first in vcpu->requests. Sites that can trigger event injection are modified to set KVM_REQ_EVENT: - interrupt, nmi window opening - ppr updates - i8259 output changes - local apic irr changes - rflags updates - gif flag set - event set on exit This improves non-injecting entry performance, and sets the stage for non-atomic injection. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch fixes a bug in KVM where it _always_ reports the support of the SVM feature to userspace. But KVM only supports SVM on AMD hardware and only when it is enabled in the kernel module. This patch fixes the wrong reporting. Cc: stable@kernel.org Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This function need to be able to load the pdptrs from any mmu context currently in use. So change this function to take an kvm_mmu parameter to fit these needs. As a side effect this patch also moves the cached pdptrs from vcpu_arch into the kvm_mmu struct. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
KVM currently ignores fetch faults in the instruction emulator. With nested-npt we could have such faults. This patch adds the code to handle these. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements logic to make sure that either a page-fault/page-fault-vmexit or a nested-page-fault-vmexit is propagated back to the guest. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the init_kvm_nested_mmu() function which is used to re-initialize the nested mmu when the l2 guest changes its paging mode. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the kvm_read_guest_page_x86 function which reads from the physical memory of the guest. If the guest is running in guest-mode itself with nested paging enabled it will read from the guest's guest physical memory instead. The patch also changes changes the code to use this function where it is necessary. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds a function which can read from the guests physical memory or from the guest's guest physical memory. This will be used in the two-dimensional page table walker. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the walk_mmu pointer which points to the mmu-context currently used for gva_to_gpa translations. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a mmu-callback to translate gpa addresses in the walk_addr code. This is later used to translate l2_gpa addresses into l1_gpa addresses. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a struct with two new fields in vcpu_arch for x86: * fault.address * fault.error_code This will be used to correctly propagate page faults back into the guest when we could have either an ordinary page fault or a nested page fault. In the case of a nested page fault the fault-address is different from the original address that should be walked. So we need to keep track about the real fault-address. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jes Sorensen 提交于
Some operating systems store data about the host processor at the time of installation, and when booted on a more uptodate cpu tries to read MSR_EBC_FREQUENCY_ID. This has been found with XP. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jes Sorensen 提交于
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant on said old AMD CPU models. This change returns the expected value, which the Linux kernel is expecting to avoid writing back the MSR, plus it ignores all writes to the MSR. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
It is read/only; restoring it only results in annoying messages. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
out = write, in = read, not the other way round. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Use do_div() instead. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
x86_emulate_insn() will return 1 if instruction can be restarted without re-entering a guest. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-