The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
which are usually used to connect local timers to each core. Each CPU
has its own private interface to the GIC, and only sees the PPIs that
are directly connect to it.

While these timers are separate devices and have a separate interrupt
line to a core, they all use the same IRQ number.

For these devices, request_irq() is not the right API as it assumes
that an IRQ number is visible by a number of CPUs (through the
affinity setting), but makes it very awkward to express that an IRQ
number can be handled by all CPUs, and yet be a different interrupt
line on each CPU, requiring a different dev_id cookie to be passed
back to the handler.

The *_percpu_irq() functions is designed to overcome these
limitations, by providing a per-cpu dev_id vector:

int request_percpu_irq(unsigned int irq, irq_handler_t handler,
		   const char *devname, void __percpu *percpu_dev_id);
void free_percpu_irq(unsigned int, void __percpu *);
int setup_percpu_irq(unsigned int irq, struct irqaction *new);
void remove_percpu_irq(unsigned int irq, struct irqaction *act);
void enable_percpu_irq(unsigned int irq);
void disable_percpu_irq(unsigned int irq);

The API has a number of limitations:
- no interrupt sharing
- no threading
- common handler across all the CPUs

Once the interrupt is requested using setup_percpu_irq() or
request_percpu_irq(), it must be enabled by each core that wishes its
local interrupt to be delivered.

Based on an initial patch by Thomas Gleixner.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This adds support for disabling threading on a per-IRQ basis via the IRQ
status instead of the IRQ flow, which is necessary for interrupts that
don't follow the natural IRQ flow channels, such as those that are
virtually created.

The new APIs added are simply:

	irq_set_thread()
	irq_set_nothread()

which follow the rest of the IRQ status routines.

Chained handlers also have IRQ_NOTHREAD set on them automatically, making
the lack of threading explicit rather than implicit. Subsequently, the
nothread flag can be viewed through the standard genirq debugging
facilities.

[ tglx: Fixed cleanup fallout ]
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/%3C20110406210135.GF18426%40linux-sh.org%3ESigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

If everything uses the right accessors, then enabling
GENERIC_HARDIRQS_NO_COMPAT should just work. If not it will tell you.

Don't be lazy and use the trick which I use in the core code!

git grep status_use_accessors

will unearth it in a split second. Offenders are tracked down and not
slapped with stinking trouts. This time we use frozen shark for a
better educational value.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Put the constants into an enum and document them.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Force the usage of wrappers by another nasty CPP substitution.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use wrappers to keep them away from the core code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

That's the data structure chip functions get provided. Also allow them
to signal the core code that they updated the flags in irq_data.state
by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged.

The type bits should be accessed via:

val = irqd_get_trigger_type(irqdata);
and
irqd_set_trigger_type(irqdata, val);

Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Keep status in sync until last abuser is gone.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

That's the right data structure to look at for arch code.

Accessor functions are provided.

	 irqd_is_per_cpu(irqdata);
	 irqd_can_balance(irqdata);

Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

chip implementations need to know about it. Keep status in sync until
all users are fixed. 

Accessor function: irqd_is_setaffinity_pending(irqdata)

Coders who access them directly will be tracked down and slapped with
stinking trouts.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

No users outside of core.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Keep status in sync until all users are fixed.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Keep status in sync until all users are fixed.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Keep status in sync until all abusers are fixed.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

No users outside of core.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We need to maintain the flag for now in both fields status and istate.
Add a CONFIG_GENERIC_HARDIRQS_NO_COMPAT switch to allow testing w/o
the status one. Wrap the access to status IRQ_INPROGRESS in a inline
which can be turned of with CONFIG_GENERIC_HARDIRQS_NO_COMPAT along
with the define.

There is no reason that anything outside of core looks at this. That
needs some modifications, but we'll get there.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The irq_desc.status field will either go away or renamed to
settings. Anyway we need to maintain compatibility to avoid breaking
the world and some more. While moving bits into the core, I need to
avoid that I use any of the still existing IRQ_ bits in the core code
by typos. So that file will hold the inline wrappers and some nasty
CPP tricks to break the build when typoed.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>