Commit a54879a0 ("ARM: dts: Fix USB dts configuration for dm816x")
attempted to fix the USB features introduced by commit 7800064b
("ARM: dts: Add basic dm816x device tree configuration") but obviously
I did not read the dmesg as more USB issues still keep trickling in.

It should be usb1_pins instead not usb0_pins for the second interface
to avoid warnings from pinctrl framework.

Cc: Brian Hutchinson <b.hutchman@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Now that we have EXTCON_USB_GPIO queued for v4.1, revert
commit addfcde7 ("ARM: dts: dra7x-evm: beagle-x15: Fix USB Host")

On these EVMs, the USB cable state has to be determined via the
ID pin tied to a GPIO line. We use the gpio-usb-extcon driver
to read the ID pin and the extcon framework to forward
the USB cable state information to the USB driver so the
controller can be configured in the right mode (host/peripheral).

Gets USB peripheral mode to work on this EVM.
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>

AM57xx does not have ATL block integrated.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Remove the 'ti,timer-dsp' and 'ti,timer-pwm' properties from the timer
nodes that still have them. This seems to be copied from OMAP5, on
which only certain timers are capable of providing PWM functionality
or be able to interrupt the DSP. All the GPTimers On DRA7 are capable
of PWM and interrupting any core (due to the presence of Crossbar).

These properties were used by the driver to add capabilities to each
timer, and support requesting timers by capability. In the DT world,
we expect any users of timers to use phandles to the respective timer,
and use the omap_dm_timer_request_by_node() API. The API to request
using capabilities, omap_dm_timer_request_by_cap() API should be
deprecated eventually.
Signed-off-by: NSuman Anna <s-anna@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

ti,codec property is not used (parsed) in omap-twl4030 driver. The ti,twl4030-audio
which ti,codec points by phandle is mfd driver and device for ASoC codec is created
w/o DT compatible string. Removing all references in DT files.
Signed-off-by: NMarek Belisko <marek@goldelico.com>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The beagle board contains a 16-bit NAND device connected to
chip select 0 of the GPMC controller.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch updates hdq node compatible property to "ti,am4372-hdq".
Signed-off-by: NVignesh R <vigneshr@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Added Pandora 1 GHz model which is based on Classic/Rebirth
with following changes:
- upgraded cpu to dm3730 runs on 1GHz
- 512 MiB DDR-333 SDRAM @ 200 MHz
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Reviewed-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Added Pandora Rebirth model which is based on Pandora
Classic with 512 MiB DDR-333 SDRAM memory.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Reviewed-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This device tree allows to boot, supports the panel,
framebuffer, touch screen, as well as some more peripherals.
Since there is a OMAP3530 based 600 MHz variant and a DM3730 based
1 GHz variant we must include this common device tree code
in one of two CPU specific device trees.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NMarek Belisko <marek@goldelico.com>
Tested-by: NGrazvydas Ignotas <notasas@gmail.com>
Reviewed-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

To be able to control the gate for the clkout2 clock output.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

i2c2 goes to an expansion connector which we
want to use.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Chiliboard uses ChiliSOM as its base.

Hardware specification:
* ChiliSOM (am335x, PMIC, DRAM, NAND)
* Ethernet PHY (id 0)
* USB host (usb1)
* microSD slot
* 2x GPIO LED
Signed-off-by: NRostislav Lisovy <lisovy@jablotron.cz>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Since this is a SOM (System on Module) that will be part
of another embedded board (and can't really exist on its own)
define it as a "dtsi" that will be included in the Device tree
describing the whole system later on.

Hardware specification:
* AM335x SoC
* up to 512 MB RAM
* NAND Flash (8x interface, cs0)
* UART0
* PMIC
* I2C0 (for PMIC)
* 1x Ethernet MAC
Signed-off-by: NRostislav Lisovy <lisovy@jablotron.cz>
[tony@atomide.com: updated nand io size to be just 4]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page
table levels folded.  Usually, these defines are provided by
<asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>.

But some architectures fold page table levels in a custom way.  They
need to define these macros themself.  This patch adds missing defines.

The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc()
and __pud_alloc() on architectures without these page table levels.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit:

   1e02ce4c ("x86: Store a per-cpu shadow copy of CR4")

added a shadow CR4 such that reads and writes that do not
modify the CR4 execute much faster than always reading the
register itself.

The change modified cpu_init() in common.c, so that the
shadow CR4 gets initialized before anything uses it.

Unfortunately, there's two cpu_init()s in common.c. There's
one for 64-bit and one for 32-bit. The commit only added
the shadow init to the 64-bit path, but the 32-bit path
needs the init too.

Link: http://lkml.kernel.org/r/20150227125208.71c36402@gandalf.local.home Fixes: 1e02ce4c "x86: Store a per-cpu shadow copy of CR4"
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150227145019.2bdd4354@gandalf.local.homeSigned-off-by: NIngo Molnar <mingo@kernel.org>

ARM64 CPUidle driver requires the cpu_do_idle function so that it can
be used to enter the shallowest idle state, and it is declared in
asm/proc-fns.h.

The current ARM64 CPUidle driver does not include asm/proc-fns.h
explicitly and it has so far relied on implicit inclusion from other
header files.

Owing to some header dependencies reshuffling this currently triggers
build failures when CONFIG_ARM64_64K_PAGES=y:

drivers/cpuidle/cpuidle-arm64.c: In function "arm64_enter_idle_state"
drivers/cpuidle/cpuidle-arm64.c:42:3: error: implicit declaration of
function "cpu_do_idle" [-Werror=implicit-function-declaration]
   cpu_do_idle();
   ^

This patch adds the explicit inclusion of the asm/proc-fns.h header file
in the arm64 asm/cpuidle.h header file, so that the build breakage is fixed
and the required header inclusion is added to the appropriate arch back-end
CPUidle header, already included by the CPUidle arm64 driver, where
CPUidle arch related function declarations belong.
Reported-by: NLaura Abbott <lauraa@codeaurora.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The native (64-bit) sigval_t union contains sival_int (32-bit) and
sival_ptr (64-bit). When a compat application invokes a syscall that
takes a sigval_t value (as part of a larger structure, e.g.
compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t
union is converted to the native sigval_t with sival_int overlapping
with either the least or the most significant half of sival_ptr,
depending on endianness. When the corresponding signal is delivered to a
compat application, on big endian the current (compat_uptr_t)sival_ptr
cast always returns 0 since sival_int corresponds to the top part of
sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int
is copied to the compat_siginfo_t structure.

Cc: <stable@vger.kernel.org>
Reported-by: NBamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Tested-by: NBamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

With commit 3690951f (arm64: Use swiotlb late initialisation), the
swiotlb buffer size is limited to MAX_ORDER_NR_PAGES. However, there are
platforms with 32-bit only devices that require bounce buffering via
swiotlb. This patch changes the swiotlb initialisation to an early 64MB
memblock allocation. In order to get the swiotlb buffer correctly
allocated (via memblock_virt_alloc_low_nopanic), this patch also defines
ARCH_LOW_ADDRESS_LIMIT to the maximum physical address capable of 32-bit
DMA.
Reported-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Patch 2f896d58 ("arm64: use fixmap for text patching") changed
the way we patch the kernel text, using a fixmap when the kernel or
modules are flagged as read only.

Unfortunately, a flaw in the logic makes it fall over when patching
modules without CONFIG_DEBUG_SET_MODULE_RONX enabled:

[...]
[   32.032636] Call trace:
[   32.032716] [<fffffe00003da0dc>] __copy_to_user+0x2c/0x60
[   32.032837] [<fffffe0000099f08>] __aarch64_insn_write+0x94/0xf8
[   32.033027] [<fffffe000009a0a0>] aarch64_insn_patch_text_nosync+0x18/0x58
[   32.033200] [<fffffe000009c3ec>] ftrace_modify_code+0x58/0x84
[   32.033363] [<fffffe000009c4e4>] ftrace_make_nop+0x3c/0x58
[   32.033532] [<fffffe0000164420>] ftrace_process_locs+0x3d0/0x5c8
[   32.033709] [<fffffe00001661cc>] ftrace_module_init+0x28/0x34
[   32.033882] [<fffffe0000135148>] load_module+0xbb8/0xfc4
[   32.034044] [<fffffe0000135714>] SyS_finit_module+0x94/0xc4
[...]

This is triggered by the use of virt_to_page() on a module address,
which ends to pointing to Nowhereland if you're lucky, or corrupt
your precious data if not.

This patch fixes the logic by mimicking what is done on arm:
- If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set,
  use vmalloc_to_page().
- If we're patching the kernel and CONFIG_DEBUG_RODATA is set,
  use virt_to_page().
- Otherwise, use the provided address, as we can write to it directly.

Tested on 4.0-rc1 as a KVM guest.
Reported-by: NRichard W.M. Jones <rjones@redhat.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NLaura Abbott <lauraa@codeaurora.org>
Tested-by: NRichard W.M. Jones <rjones@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch increases the interleave factor for parallel AES modes
to 4x. This improves performance on Cortex-A57 by ~35%. This is
due to the 3-cycle latency of AES instructions on the A57's
relatively deep pipeline (compared to Cortex-A53 where the AES
instruction latency is only 2 cycles).

At the same time, disable inline expansion of the core AES functions,
as the performance benefit of this feature is negligible.

  Measured on AMD Seattle (using tcrypt.ko mode=500 sec=1):

  Baseline (2x interleave, inline expansion)
  ------------------------------------------
  testing speed of async cbc(aes) (cbc-aes-ce) decryption
  test 4 (128 bit key, 8192 byte blocks): 95545 operations in 1 seconds
  test 14 (256 bit key, 8192 byte blocks): 68496 operations in 1 seconds

  This patch (4x interleave, no inline expansion)
  -----------------------------------------------
  testing speed of async cbc(aes) (cbc-aes-ce) decryption
  test 4 (128 bit key, 8192 byte blocks): 124735 operations in 1 seconds
  test 14 (256 bit key, 8192 byte blocks): 92328 operations in 1 seconds
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Caught during Trinity testing. The pte_modify does not allow
modification for PTE type bit. This cause the test to hang
the system. It is found that the PTE can't transit from an
inaccessible page (b00) to a valid page (b11) because the mask
does not allow it. This happens when a big block of mmaped
memory is set the PROT_NONE, then the a small piece is broken
off and set to PROT_WRITE | PROT_READ cause a huge page split.
Signed-off-by: NFeng Kan <fkan@apm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The functions __cpu_flush_user_tlb_range and __cpu_flush_kern_tlb_range
were removed in commit fa48e6f7 'arm64: mm: Optimise tlb flush logic
where we have >4K granule'. Global variable cpu_tlb was never used in
arm64.

Remove them.
Signed-off-by: NYingjoe Chen <yingjoe.chen@mediatek.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

An arm64 allmodconfig fails to build with GCC 5 due to __asmeq
assertions in the PSCI firmware calling code firing due to mcount
preambles breaking our assumptions about register allocation of function
arguments:

  /tmp/ccDqJsJ6.s: Assembler messages:
  /tmp/ccDqJsJ6.s:60: Error: .err encountered
  /tmp/ccDqJsJ6.s:61: Error: .err encountered
  /tmp/ccDqJsJ6.s:62: Error: .err encountered
  /tmp/ccDqJsJ6.s:99: Error: .err encountered
  /tmp/ccDqJsJ6.s:100: Error: .err encountered
  /tmp/ccDqJsJ6.s:101: Error: .err encountered

This patch fixes the issue by moving the PSCI calls out-of-line into
their own assembly files, which are safe from the compiler's meddling
fingers.
Reported-by: NAndy Whitcroft <apw@canonical.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The vdso implementation of clock_getres currently returns 0 (success)
whenever a null timespec is provided by the caller, regardless of the
clock id supplied.

This behavior is incorrect.  It should fall back to syscall when an
unrecognized clock id is passed, even when the timespec argument is
null.  This ensures that clock_getres always returns an error for
invalid clock ids.
Signed-off-by: NNathan Lynch <nathan_lynch@mentor.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Enable support for shmobile platforms that became multi-platform aware.
Several non-critical drivers and subsystems are built as modules, to keep
kernel size reasonable.

Tested on:
  - r8a73a4/ape6evm:
      - U-Boot fails with "Error: unrecognized/unsupported machine ID",
      - kexec works.
  - r8a7740/armadillo:
      - Hermit boot loader fails (larger image, more memory corruption),
      - kexec works.
  - r8a7791/koelsch,
  - sh73a0/kzm9g:
      - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n,
      - kexec works.
  - am335x/boneblack.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Commit 5d425c18 ("arm64: kernel: add support for cpu cache
information") adds cacheinfo support for ARM64. Since there's no
architectural way of detecting the cpus that share particular cache,
device tree can be used and the core cacheinfo already supports the
same.

This patch adds the L2 cache topology on Juno board, FVP/RTSM and
foundation models.
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The Kconfig options for the asm9260 timer is wrong as it can be selected by
another platform with allyes config and thus leading to a compilation failure
as some non arch related code is pulled by the compilation.

Fix this by having the platform Kconfig to select the timer as it is done for
the others drivers.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NOleksij Rempel <linux@rempel-privat.de>

Conflicts:
	drivers/clocksource/Kconfig

Fixes: http://bugs.elinux.org/issues/127

the bb.org community was seeing random reboots before this change.
Signed-off-by: NRobert Nelson <robertcnelson@gmail.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

In commit 87517d26 ("ARM: dts: dra7-evm: Add extcon nodes for USB")
we enabled Extcon USB gpio to tackle the USB ID pin and get
peripheral mode to work.

But the extcon-gpio-usb driver [1] didn't make it into v4.0
and this makes the USB driver defer probe indefinitely breaking
USB Host functionality.

As a temporary fix we remove the extcon handle from the
USB controller and add it back when the extcon driver
merges in v4.1.

[1] - https://lkml.org/lkml/2015/2/2/187Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

SATA operation depends on PIPE3 PHY and if we want
to boot from SATA drives, we have to have the PIPE3 PHY
driver built-in.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Without this NAND doesn't work on most EVMs.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

we have i2c0 sleep pinctrl state but were passing
default state anyhow. Fix that.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This regulator is used on AM437x Industrial Development Kit.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

As it turns out, tps62362 is actually on I2C bus0,
not bus1. This has gone unnoticed because Linux
doesn't use (as of now) that regulator at all, it's
setup by the bootloader and left as is.

While at that, also add missing reg property for
our regulator.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>