The children of regulators node do not have reg/ranges properties.  Move the
children up one level, get rid of regulators node and remove
address-cells and size-cells properties.  This fixes warnings for
Exynos4412 Midas family boards:

    arch/arm/boot/dts/exynos4412-i9300.dtb: Warning (avoid_unnecessary_addr_size):
        /regulators: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
    arch/arm/boot/dts/exynos4412-i9305.dtb: Warning (avoid_unnecessary_addr_size):
        /regulators: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
    arch/arm/boot/dts/exynos4412-n710x.dtb: Warning (avoid_unnecessary_addr_size):
        /regulators: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

After moving all nodes under "soc" node in commit 5d99cc59 ("ARM:
dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc"), the i2c20
alias in Peach Pit and Peach Pi stopped pointing to proper node:

    arch/arm/boot/dts/exynos5420-peach-pit.dtb: Warning (alias_paths):
        /aliases:i2c20: aliases property is not a valid node (/spi@12d40000/cros-ec@0/i2c-tunnel)
    arch/arm/boot/dts/exynos5800-peach-pi.dtb: Warning (alias_paths):
        /aliases:i2c20: aliases property is not a valid node (/spi@12d40000/cros-ec@0/i2c-tunnel)

Fixes: 5d99cc59 ("ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc")
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

The PMU node is the actual block responsible for power management,
including typical Exynos on/off/restart procedures.  Therefore the
syscon poweroff and restart nodes logically belong to it.
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com>

Handling of special clock operations on power domain on/off sequences
has been moved to respective Exynos clock controller drivers and clock
properties have been marked as deprecated. Remove all clock properties
from existing Exynos power domain nodes, as they are no longer used.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Add 'chosen' node with 'stdout-path' property to instruct kernel which
serial driver should be used for kernel console/logs. This allows to
enable earlycon messages by adding just 'earlycon' parameter to kernel
command line.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

Add support for USB OTG port on Insignal Origen Exynos4210-based evaluation
board.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

The current (mildly evil) fsl_pq_mdio code uses an undocumented shadow of
the TBIPA register on LS1021A, which happens to be read-only.
Changing TBI PHY address therefore does not work on LS1021A.

The real (and documented) address of the TBIPA registere lies in the eTSEC
block and not in MDIO/MII, which is read/write, so using that fixes
the problem.
Signed-off-by: NEsben Haabendal <eha@deif.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calling __stack_chk_guard_setup() in decompress_kernel() is too late
that stack checking always fails for decompress_kernel() itself.  So
remove __stack_chk_guard_setup() and initialize __stack_chk_guard before
we call decompress_kernel().

Original code comes from ARM but also used for MIPS and SH, so fix them
together.  If without this fix, compressed booting of these archs will
fail because stack checking is enabled by default (>=4.16).

Link: http://lkml.kernel.org/r/1522226933-29317-1-git-send-email-chenhc@lemote.com
Fixes: 8779657d ("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG")
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Acked-by: NJames Hogan <jhogan@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NRich Felker <dalias@libc.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ee333554 ("ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE")
introduced a new warning:

arch/arm/boot/compressed/misc.c: In function 'fortify_panic':
arch/arm/boot/compressed/misc.c:167:1: error: 'noreturn' function does return [-Werror]

The simple solution would be to make 'error' a noreturn function, but
this causes a prototype mismatch as the function is prototyped in
several .c files.  So, move the function prototype to a new header.

There are also a couple of variables that are also declared in several
locations.  Clean this up while we are here.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Modify Nuvoton NPCM7xx device tree structure by adding
nuvoton common nNPCM7xx device tree structure that
include all common modules.
Signed-off-by: NTomer Maimon <tmaimon77@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Signed-off-by: NTomer Maimon <tmaimon77@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Modify clock binding in a common device tree for all Nuvoton
NPCM750 BMCs.

Modify NPCM750 modules clock numbers accourding the new
clock driver.
Signed-off-by: NTomer Maimon <tmaimon77@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Modify timer register size in a common device tree for all Nuvoton
NPCM750 BMCs.
Signed-off-by: NTomer Maimon <tmaimon77@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Modify UART compatible name in a common device tree for all Nuvoton
NPCM750 BMCs.
Signed-off-by: NTomer Maimon <tmaimon77@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add watchdog device node to a common device tree for all Nuvoton
NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg)
evaluation board.
Signed-off-by: NTomer Maimon <tmaimon77@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

CONFIG_FORTIFY_SOURCE detects various overflows at compile-time.
(6974f0c4 ("include/linux/string.h:
add the option of fortified string.h functions)

ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and
run with CONFIG_FORTIFY_SOURCE.

Since ARM can be built and run with that flag like other architectures,
select ARCH_HAS_FORTIFY_SOURCE as default.
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NJinbum Park <jinb.park7@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Add pinctrl groups of ethernet, such as "ether1_rgmii" and "ether1_rmii".
These are used for second ethernet instance.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Follow the recent trend for the license description
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.htmlAcked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.htmlAcked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html

Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Follow the recent trend for the license description, and also fix the
wrongly stated X11 to MIT.

As already pointed on the DT ML, the X11 license text [1] is explicitly
for the X Consortium and has a couple of extra clauses. The MIT
license text [2] is actually what the current DT files claim.

[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.htmlAcked-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

Add SFP module support for Clearfog using the SFP phylink support.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

The internal RTC does not work correctly on these Linksys boards based
on Marvell SoCs. For me it only shows Wed Dec 31 23:59:59 1969 and for
others it is off by 3 minutes in 10 minutes running, this was reported
by multiple users. On the Linksys Mamba device the device tree comment
says that no crystal is connected to the internal RTC, this is probably
also true for the other devices.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NGregory CLEMENT <gregory.clement@bootlin.com>

The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
gpio-fan cooling device is found by referring to the
"gpio-fan,speed-map" instead.

Remove the unused properties from the gpio-fan node.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

stat(1) is not standardized and different implementations have their own
(conflicting) flags for querying the size of a file.

ls(1) provides the same information (value of st.st_size) in the 5th
column, except when the file is a character or block device. This output
is standardized[0]. The -n option turns on -l, which writes lines
formatted like

  "%s %u %s %s %u %s %s\n", <file mode>, <number of links>,
      <owner name>, <group name>, <size>, <date and time>,
      <pathname>

but instead of writing the <owner name> and <group name>, it writes the
numeric owner and group IDs (this avoids /etc/passwd and /etc/group
lookups as well as potential field splitting issues).

The <size> field is specified as "the value that would be returned for
the file in the st_size field of struct stat".

To avoid duplicating logic in several locations in the tree, create
scripts/file-size.sh and update callers to use that instead of stat(1).

[0] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/ls.html#tag_20_73_10Signed-off-by: NMichael Forney <forney@google.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Send nm complaints about broken pipe (when sed exits early) to /dev/null.
All errors should be printed to stderr.
Don't trap on normal exit so the trap can return an error code.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Fixes the warning "GIC: PPI13 is secure or misconfigured" by
changing the interrupt type from level_low to edge_raising
Signed-off-by: NPhilipp Puschmann <pp@emlix.com>
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>

For consistency with all other serial pins, add this pullup. It also
prevents the signal from floating and so consuming a useless extra amount
of power in crowbarred state if nothing is connected to RX.
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>

Remove pullup on uart TX signals, they are push-pull outputs thus
pullups are pointless.

Add pullup on uart RX signals, they prevent the RX signals to be left
floating and so consuming a useless extra amount of power in crowbarred
state if nothing is connected to RX.
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>

There are only 19 PIOB pins having primary names PB0-PB18. Not all of them
have a 'C' function. So the pinctrl property mask ends up being the same as the
other SoC of the at91sam9x5 series.
Reported-by: NMarek Sieranski <marek.sieranski@microchip.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>

Update the "gpio-ranges" property of the CBUS GPIO controller on Meson8b
because it only provides 83 GPIOs.
The GPIO definitions in include/dt-bindings/gpio/meson8b-gpio.h
inherited all GPIOs from Meson8 until recently. However, Meson8b does
not support all GPIOs which are supported by Meson8 (Meson8b doesn't
have a GPIOZ bank, most of the pins from the GPIODV bank are missing on
Meson8b - just to name a few differences).

The actual number of GPIOs is only 83, instead of 120 from Meson8 plus
the 10 GPIOs from the DIF bank on Meson8b.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NJerome Brunet <jbrunet@baylibre.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>