- 16 3月, 2013 14 次提交
-
-
由 Namhyung Kim 提交于
It's almost always used with NULL for both arguments. Get rid of the arguments from the signature and use perf_evlist__set_maps() if needed. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1362987798-24969-1-git-send-email-namhyung@kernel.org [ committer note: replaced spaces with tabs in some of the affected lines ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
Jiri Olsa triggers the following build error: SUBDIR ../lib/lk/ CC debugfs.o In file included from /usr/include/errno.h:29:0, from debugfs.c:1: /usr/include/features.h:314:4: error: #warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp] This is because enabling buffer overflow checks through _FORTIFY_SOURCE require compiler optimizations to be enabled too. However, those are not. Enable them by simply copying the perf optimization level. It can be expanded later if we want to support debug builds, etc. Signed-off-by: NBorislav Petkov <bp@suse.de> Reported-by: NJiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1362338733-8718-1-git-send-email-bp@alien8.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
page-flags.c had some older version of debugfs_mount copied from perf so convert it to using the version in the tools library. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/1361374353-30385-8-git-send-email-bp@alien8.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
Move them to util.c and simplify code a bit. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1361374353-30385-6-git-send-email-bp@alien8.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
This introduces the tools/lib/lk library, that will gradually have the routines that now are used in tools/perf/ and other tools and that can be shared. Start by carving out debugfs routines for general use. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1361374353-30385-5-git-send-email-bp@alien8.de [ committer note: Add tools/lib/lk/ to perf's MANIFEST so that its tarballs continue to build ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding test to validate perf_event_attr data for command: 'stat -C 0' Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1361785972-7431-6-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Adding test to validate perf_event_attr data for command: 'record -C 0' Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1361785972-7431-5-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Make attr script to check for 'cpu' when testing event properties. This will allow us to check the '-C X' option for both record and stat commands. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1361785972-7431-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Making the attr test script runner to pass proper verbose option. Also making single '-v' be more reader friendly and display just the test name. Making the current output to be display for '-vv'. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1361785972-7431-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 liguang 提交于
Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1361851974-25307-1-git-send-email-lig.fnst@cn.fujitsu.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
It looks at O= and adjusts the $(OUTPUT) variable based on what the output directory will be. However, when O is defined but empty, it wrongly becomes the user's $HOME dir which is not what we want. So check it is not empty before working with it further. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1361374353-30385-4-git-send-email-bp@alien8.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
We need to hand down parallel build options like the internal make --jobserver-fds one so that parallel builds can also happen when building perf from the toplevel directory. Make it so #1! Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1361374353-30385-3-git-send-email-bp@alien8.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Borislav Petkov 提交于
debugfs_premounted is written-to only so drop it. This functionality is covered by debugfs_found now. Make it a bool while at it. Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1361374353-30385-2-git-send-email-bp@alien8.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Cody P Schafer 提交于
Including libio.h causes build failures on uClibc systems (which lack libio.h). It appears that libio.h was only included to pull in a definition for NULL, so it has been replaced by stddef.h. On powerpc, libio.h was conditionally included, but could be removed completely as it is unneeded. Also, the included of stdlib.h was changed to stddef.h (as again, only NULL is needed). Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1363300074-26288-1-git-send-email-cody@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 3月, 2013 8 次提交
-
-
由 Vinson Lee 提交于
The tokens MADV_HUGEPAGE and MADV_NOHUGEPAGE are not available with glibc 2.12 and older. Define these tokens if they are not already defined. This patch fixes these build errors with older versions of glibc. CC bench/numa.o bench/numa.c: In function ‘alloc_data’: bench/numa.c:334: error: ‘MADV_HUGEPAGE’ undeclared (first use in this function) bench/numa.c:334: error: (Each undeclared identifier is reported only once bench/numa.c:334: error: for each function it appears in.) bench/numa.c:341: error: ‘MADV_NOHUGEPAGE’ undeclared (first use in this function) make: *** [bench/numa.o] Error 1 Signed-off-by: NVinson Lee <vlee@twitter.com> Acked-by: NIngo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1363214064-4671-2-git-send-email-vlee@twitter.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Sukadev Bhattiprolu 提交于
Create a sysfs entry, '/sys/bus/event_source/devices/cpu/format/event' which describes the format of the POWER7 PMU events. This code is based on corresponding code in x86. Changelog[v4]: [Michael Ellerman, Paul Mckerras] The event format is different for other POWER cpus. So move the code to POWER7-specific, power7-pmu.c Also, the POWER7 format uses bits 0-19 not 0-20. Changelog[v2]: [Jiri Osla] Use PMU_FORMAT_ATTR rather than duplicating code. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by: NPaul Mackerras <paulus@samba.org> Tested-by: NMichael Ellerman <michael@ellerman.id.au> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anton Blanchard <anton@au1.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: benh@kernel.crashing.org Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20130306054826.GA14627@us.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
Fix segfault in perf probe due to a bug introduced by commit d8639f06 (perf tools: Stop using 'self' in strlist). Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20130312090217.GC4668@in.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jack Mitchell 提交于
having /usr/local/include hardcoded into the makefile is not necessary as this is automatically included by GCC. It also infects cross-compile builds with the host systems includes. Signed-off-by: NJack Mitchell <jack.mitchell@dbbroadcast.co.uk> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1362741712-21308-1-git-send-email-ml@communistcode.co.ukSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Currently the -C option does not work for record command, because of the targets mismatch when synthesizing threads. Fixing this by using proper target interface for the synthesize decision. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Reported-by: NOleg Nesterov <oleg@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1361785972-7431-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Marcin Slusarz 提交于
It seems gcc (4.7.2) defines _FORTIFY_SOURCE internally and becomes confused when it sees another definition in flags. For me, build failed like this: CHK glibc Makefile:548: *** No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static. Stop. and only with V=1 it printed: <command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror] <stdin>:1:0: note: this is the location of the previous definition Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1361113416-8662-1-git-send-email-marcin.slusarz@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Michael Ellerman 提交于
Commit ad0de097 "Enable the runtime switching of perf data file" broke the build with NO_NEWT=1: CC builtin-report.o builtin-report.c: In function '__cmd_report': builtin-report.c:479:15: error: 'K_SWITCH_INPUT_DATA' undeclared (first use in this function) builtin-report.c:479:15: note: each undeclared identifier is reported only once for each function it appears in builtin-report.c: In function 'cmd_report': builtin-report.c:823:13: error: 'K_SWITCH_INPUT_DATA' undeclared (first use in this function) make: *** [builtin-report.o] Error 1 Fix it by adding a dummy definition of K_SWITCH_INPUT_DATA. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Cc: Feng Tang <feng.tang@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1361854923-1814-2-git-send-email-michael@ellerman.id.auSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Michael Ellerman 提交于
Commit 18c9e5c5 "Make it to be able to skip unannotatable symbols" broke the build with NO_NEWT=1: CC builtin-annotate.o builtin-annotate.c: In function 'hists__find_annotations': builtin-annotate.c:161:4: error: duplicate case value builtin-annotate.c:154:4: error: previously used here make: *** [builtin-annotate.o] Error 1 This is because without NEWT support K_LEFT is #defined to -1 in utils/hist.h Fix it by shifting the K_LEFT/K_RIGHT #defines out of the likely range of error values. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Cc: Feng Tang <feng.tang@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1361854923-1814-1-git-send-email-michael@ellerman.id.auSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 11 3月, 2013 1 次提交
-
-
由 Li Zefan 提交于
Commit 877c6856 ("perf: Remove include of cgroup.h from perf_event.h") caused this build failure if PERF_EVENTS is enabled: In file included from arch/s390/include/asm/perf_event.h:9:0, from include/linux/perf_event.h:24, from kernel/events/ring_buffer.c:12: arch/s390/include/asm/cpu_mf.h: In function 'qctri': arch/s390/include/asm/cpu_mf.h:61:12: error: 'EINVAL' undeclared (first use in this function) cpu_mf.h had an implicit errno.h dependency, which was added indirectly via cgroups.h but not anymore. Add it explicitly. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Tested-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NLi Zefan <lizefan@huawei.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: http://lkml.kernel.org/r/51385F79.7000106@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 08 3月, 2013 1 次提交
-
-
由 Hiraku Toyooka 提交于
Now, "snapshot" file returns success on a reset of snapshot buffer even if the buffer wasn't allocated, instead of returning EINVAL. This patch updates snapshot desctiption according to the change. Link: http://lkml.kernel.org/r/51399409.4090207@hitachi.comSigned-off-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 07 3月, 2013 2 次提交
-
-
由 Steven Rostedt (Red Hat) 提交于
To use the tracing snapshot feature, writing a '1' into the snapshot file causes the snapshot buffer to be allocated if it has not already been allocated and dose a 'swap' with the main buffer, so that the snapshot now contains what was in the main buffer, and the main buffer now writes to what was the snapshot buffer. To free the snapshot buffer, a '0' is written into the snapshot file. To clear the snapshot buffer, any number but a '0' or '1' is written into the snapshot file. But if the file is not allocated it returns -EINVAL error code. This is rather pointless. It is better just to do nothing and return success. Acked-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt (Red Hat) 提交于
When cat'ing the snapshot file, instead of showing an empty trace header like the trace file does, show how to use the snapshot feature. Also, this is a good place to show if the snapshot has been allocated or not. Users may want to "pre allocate" the snapshot to have a fast "swap" of the current buffer. Otherwise, a swap would be slow and might fail as it would need to allocate the snapshot buffer, and that might fail under tight memory constraints. Here's what it looked like before: # tracer: nop # # entries-in-buffer/entries-written: 0/0 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | Here's what it looks like now: # tracer: nop # # # * Snapshot is freed * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') Acked-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 28 2月, 2013 2 次提交
-
-
由 Ingo Molnar 提交于
Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent Pull an ftrace Kconfig help text fix from Steve Rostedt. Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Steven Rostedt 提交于
The prompt to enable DYNAMIC_FTRACE (the ability to nop and enable function tracing at run time) had a confusing statement: "enable/disable ftrace tracepoints dynamically" This was written before tracepoints were added to the kernel, but now that tracepoints have been added, this is very confusing and has confused people enough to give wrong information during presentations. Not only that, I looked at the help text, and it still references that dreaded daemon that use to wake up once a second to update the nop locations and brick NICs, that hasn't been around for over five years. Time to bring the text up to the current decade. Cc: stable@vger.kernel.org Reported-by: NEzequiel Garcia <elezegarcia@gmail.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 20 2月, 2013 12 次提交
-
-
由 Ingo Molnar 提交于
Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/urgent Pull two fixes from Steven Rostedt. Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
Intel IvyBridge processor has different constraints compared to SandyBridge. Therefore it needs its own contraint table. This patch adds the constraint table. Without this patch, the events listed in the patch may not be scheduled correctly and bogus counts may be collected. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: ak@linux.intel.com Cc: acme@redhat.com Cc: jolsa@redhat.com Cc: namhyung.kim@lge.com Link: http://lkml.kernel.org/r/1361355312-3323-1-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull async changes from Tejun Heo: "These are followups for the earlier deadlock issue involving async ending up waiting for itself through block requesting module[1]. The following changes are made by these commits. - Instead of requesting default elevator on each request_queue init, block now requests it once early during boot. - Kmod triggers warning if invoked from an async worker. - Async synchronization implementation has been reimplemented. It's a lot simpler now." * 'for-3.9-async' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: async: initialise list heads to fix crash async: replace list of active domains with global list of pending items async: keep pending tasks on async_domain and remove async_pending async: use ULLONG_MAX for infinity cookie value async: bring sanity to the use of words domain and running async, kmod: warn on synchronous request_module() from async workers block: don't request module during elevator init init, block: try to load default elevator module early during boot
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue changes from Tejun Heo: "A lot of reorganization is going on mostly to prepare for worker pools with custom attributes so that workqueue can replace custom pool implementations in places including writeback and btrfs and make CPU assignment in crypto more flexible. workqueue evolved from purely per-cpu design and implementation, so there are a lot of assumptions regarding being bound to CPUs and even unbound workqueues are implemented as an extension of the model - workqueues running on the special unbound CPU. Bulk of changes this round are about promoting worker_pools as the top level abstraction replacing global_cwq (global cpu workqueue). At this point, I'm fairly confident about getting custom worker pools working pretty soon and ready for the next merge window. Lai's patches are replacing the convoluted mb() dancing workqueue has been doing with much simpler mechanism which only depends on assignment atomicity of long. For details, please read the commit message of 0b3dae68 ("workqueue: simplify is-work-item-queued-here test"). While the change ends up adding one pointer to struct delayed_work, the inflation in percentage is less than five percent and it decouples delayed_work logic a lot more cleaner from usual work handling, removes the unusual memory barrier dancing, and allows for further simplification, so I think the trade-off is acceptable. There will be two more workqueue related pull requests and there are some shared commits among them. I'll write further pull requests assuming this pull request is pulled first." * 'for-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (37 commits) workqueue: un-GPL function delayed_work_timer_fn() workqueue: rename cpu_workqueue to pool_workqueue workqueue: reimplement is_chained_work() using current_wq_worker() workqueue: fix is_chained_work() regression workqueue: pick cwq instead of pool in __queue_work() workqueue: make get_work_pool_id() cheaper workqueue: move nr_running into worker_pool workqueue: cosmetic update in try_to_grab_pending() workqueue: simplify is-work-item-queued-here test workqueue: make work->data point to pool after try_to_grab_pending() workqueue: add delayed_work->wq to simplify reentrancy handling workqueue: make work_busy() test WORK_STRUCT_PENDING first workqueue: replace WORK_CPU_NONE/LAST with WORK_CPU_END workqueue: post global_cwq removal cleanups workqueue: rename nr_running variables workqueue: remove global_cwq workqueue: remove worker_pool->gcwq workqueue: replace for_each_worker_pool() with for_each_std_worker_pool() workqueue: make freezing/thawing per-pool workqueue: make hotplug processing per-pool ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue [delayed_]work_pending() cleanups from Tejun Heo: "This is part of on-going cleanups to remove / minimize usages of workqueue interfaces which are deprecated and/or misleading. This round drops a number of usages of [delayed_]work_pending(), which are dangerous as they lack any form of synchronization and thus often lead to buggy / unnecessary code. There are a couple legitimate use cases in kernel. Hopefully, they can be converted and [delayed_]work_pending() can be removed completely. Even if not, removing most of misuses should make it more difficult to find examples of misuses and thus slow down growth of them. These changes are independent from other workqueue changes." * 'for-3.9-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: wimax/i2400m: fix i2400m->wake_tx_skb handling kprobes: fix wait_for_kprobe_optimizer() ipw2x00: simplify scan_event handling video/exynos: don't use [delayed_]work_pending() tty/max3100: don't use [delayed_]work_pending() x86/mce: don't use [delayed_]work_pending() rfkill: don't use [delayed_]work_pending() wl1251: don't use [delayed_]work_pending() thinkpad_acpi: don't use [delayed_]work_pending() mwifiex: don't use [delayed_]work_pending() sja1000: don't use [delayed_]work_pending()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 UV3 support update from Ingo Molnar: "Support for the SGI Ultraviolet System 3 (UV3) platform - the upcoming third major iteration and upscaling of the SGI UV supercomputing platform." * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, uv, uv3: Trim MMR register definitions after code changes for SGI UV3 x86, uv, uv3: Check current gru hub support for SGI UV3 x86, uv, uv3: Update Time Support for SGI UV3 x86, uv, uv3: Update x2apic Support for SGI UV3 x86, uv, uv3: Update Hub Info for SGI UV3 x86, uv, uv3: Update ACPI Check to include SGI UV3 x86, uv, uv3: Update MMR register definitions for SGI Ultraviolet System 3 (UV3)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform changes from Ingo Molnar: - Support for the Technologic Systems TS-5500 platform, by Vivien Didelot - Improved NUMA support on AMD systems: Add support for federated systems where multiple memory controllers can exist and see each other over multiple PCI domains. This basically means that AMD node ids can be more than 8 now and the code handling this is taught to incorporate PCI domain into those IDs. - Support for the Goldfish virtual Android emulator, by Jun Nakajima, Intel, Google, et al. - Misc fixlets. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add TS-5500 platform support x86/srat: Simplify memory affinity init error handling x86/apb/timer: Remove unnecessary "if" goldfish: platform device for x86 amd64_edac: Fix type usage in NB IDs and memory ranges amd64_edac: Fix PCI function lookup x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id x86, AMD, NB: Add multi-domain support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/hyperv changes from Ingo Molnar: "The biggest change is support for Windows 8's improved hypervisor interrupt model on the Linux Hyper-V guest subsystem code side. Smallish fixes otherwise." * 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, hyperv: HYPERV depends on X86_LOCAL_APIC X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts X86: Add a check to catch Xen emulation of Hyper-V x86: Hyper-V: register clocksource only if its advertised
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86/debug changes from Ingo Molnar: "Two init annotations and a built-in memtest speedup" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/memtest: Shorten time for tests x86: Convert a few mistaken __cpuinit annotations to __init x86/EFI: Properly init-annotate BGRT code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanup patches from Ingo Molnar: "Misc smaller cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: ptrace.c only needs export.h and not the full module.h x86, apb_timer: remove unused variable percpu_timer um: don't compare a pointer to 0 arch/x86/platform/uv: use ARRAY_SIZE where possible
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull two x86 kernel build changes from Ingo Molnar: "The first change modifies how 'make oldconfig' works on cross-bitness situations on x86. It was felt the new behavior of preserving the bitness of the .config is more logical. This is a leftover of the merge. The second change eliminates a Perl warning. (There's another, more complete fix resulting of this warning fix, which second fix in flight to you via the kbuild tree, which will remove the timeconst.pl script altogether.)" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timeconst.pl: Eliminate Perl warning x86: Default to ARCH=x86 to avoid overriding CONFIG_64BIT
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 bootup changes from Ingo Molnar: "Deal with bootloaders which fail to initialize unknown fields in boot_params to zero, by sanitizing boot params passed in. This unbreaks versions of kexec-utils. Other bootloaders do not appear to show sensitivity to this change, but it's a possibility for breakage nevertheless." * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, boot: Sanitize boot_params if not zeroed on creation
-