Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ASoC machine drivers for this board were only provided as examples
for the new AT91 ASoC platform driver.  Since the ETI-B1 board is
proprietary and there are other AT91 ASoC machine drivers available,
it makes sense to remove these drivers.
Signed-off-by: NFrank Mandarino <fmandarino@endrelia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new API call snd_soc_dapm_nc_pin() which allows machine drivers to
mark pins as being permanently disabled.  At present this is identical
to snd_soc_dapm_disable_pin() except in terms of improving the internal
documentation of machine drivers that use it.  The intention is that in
future it will be extended to provide additional features such as hiding
controls that are only relevant to paths using the disconnected pin.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for powering down VREF on standard headphone insertion, also
powers up the VREF on a headset insertion.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Set the third microphone to a default config of a 'Line In' to be
added the Input Source Mux's.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Since there are now multiple OpenMoko platforms it is more important to
check that the machine driver is running on the correct system.  This
was orgininally generated as part of the initial GTA02 machine port.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Ingo reported Oops at probing mtpav driver.  It's a race between
the irq handler and the rawmidi instance registration.

This patch fixes the order of registration to avoid the race.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The MIDI interfaces have to be detected dynamically for Edirol devices
ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by
my other patch in uaxx-quirk.
Signed-off-by: NPedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added a note on the dependency of old RTC stuff, which is exclusive
with the new RTC class drivers.
    http://bugme.linux-foundation.org/show_bug.cgi?id=11430Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Function dapm_mux_update_power needs enum index mux and register mask value val
as parameters, but it only has a parameter val, and uses it as both val and mux.
snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here,
e->texts[val] but val should be enum index mux here.

This patch adds a new param mux to fix it.
Signed-off-by: NRichard Zhao <linuxzsc@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Increase the card components[] (and thus snd_card_info.components[],
too) array size from 80 to 128 chars so that more strings can be
stored.  The 80 chars aren't enough for more than 2 HD-audio codecs,
and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP
2230s.

The control protocol number is increased to 2.0.6 as well, in case
it matters.
Reported-by: NWu Fengguang <wfg@linux.intel.com>
Acked-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Mic PGA Switch should be inverted in the WM8510 driver but isn't.

Reported-by: ext-jukka.hynninen@vaisala.com
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

fix a typo in comment for is_in_nid_list().
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

fix a typo in comment for process_unsol_events().

Signed-off-by: Wu Fengguang<wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The PCI SSID for ASROCK mobo in commit
ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong.
This patch fixes to the correct one, 1849:3662.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Renamed the old quirk function for ua-700/ua-25 to become more
generic, moving the MIDI interfaces to the quirk data header.
Added a new quirk for the Edirol UA-4FX.
Signed-off-by: NPedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The endpoints should be released immediately at disconnection
rather than the delayed release.  This could be a reason of Oops
at USB-audio device disconnection being used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883
Signed-off-by: NClive Messer <clive@vacuumtube.org.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

I recently got a chance to play with two boards with ALC662 rev1:
* BIOSTAR TA780G M2+
* ASROCK K10N78FullHD-hSLI R3.0
Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able
to figure that out from BIOS, we need to specify that manually.
Signed-off-by: NVedran Miletic <rivanvx@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

This patch adds PCI IDs for:
* TerraTec DMX XFire 1024
* Hercules Gamesurround Fortissimo II
* Hercules Gamesurround Fortissimo III 7.1
All those cards were supported as generic CS46xx device,
so they will work as before. I'm pretty sure that first two
cards work, as they have same hardware design as reference
card. Not sure about Fortissimo III, but this won't break it
if it worked.

Tested on TerraTec DMX XFire 1024.
Signed-off-by: NVedran Miletic <rivanvx@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on
supporting codecs.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The AppleTV needs the same handling as the 24" iMac.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The test (ssc != NULL) can only be reached if the call to the function
ssc_request, the result of which ssc is assigned, succeeds. Moreover,
two statements assign NULL to ssc just before a return, which is useless
since it is a local variable. So, we suggest to delete the test and
the two assignments.

A simplified version of the semantic match that finds this problem is
as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@bad_null_test@
expression x,E;
@@
x = ssc_request(...)
... when != x = E
* x != NULL
// </smpl>
Signed-off-by: NJulien Brunel <brunel@diku.dk>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Added HP laptop SND_PCI_QUIRK for STAC_HP_M4.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add support for S/PDIF IN on reference boards quirks. Also disable the
IEC958 capture switch on boards with GPIO0 enabled.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add support for the E-Mu "Tracker Pre" USB sound card, following
the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB.

As with the 0202 and 0404 USB, functionality is very limited:
just a couple of sample rates, no volume/mute control, etc.
Signed-off-by: NEran Tromer <eran@tromer.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

When read RIRB buffer immediately after RIRB interrupt received,
sometimes the data will be "0x0". If we wait for some time, the data
in buffer will be correct. This issue only occurred with AMD Phenom cpu.
So we set this "needs_damn_long_delay" flag.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver,
include NVIDIA MCP78/7A HDMI.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The recent slave_dig_out addition has some rooms to clean up.
Also it doesn't call snd_hda_cleanup_stream() properly for slaves
at closing.  The patch fixes both issues.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch
control. Beforehand this was basically a mute switch for the S/PDIF outs as well.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fujitsu Lifebook P7010 requires ac97_quirk=hp_only.
    http://bugzilla.kernel.org/show_bug.cgi?id=9100Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

We have some arithmetic operations against snd_pcm_hw_param_t, thus
bitwise isn't correct for it.  Better to remove the flag to shut up
sparse warnings.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Patch allows the last DAC in the dac_nids for the hp_nid if there is an
available one this isn't in use by a line_out entry or if hp_nid isn't already
defined. This solves the issues with the 'Headphone Playback' mixer
controls on the 92hd73xxx branch and possibly others.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

After sending a reset command to the UART, wait some time for the ACK to
be generated (and to be read and dropped by the interrupt handler)
before sending the next command.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Convert the tlv320aic3x codec driver to the new (standard) device
driver binding model.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Vladimir Barinov <vbarinov@ru.mvista.com>
Tested-by: NJarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>