When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.

If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.

Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.

The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.

In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove use of the num_ports general capability throughout. The number of
ports will be variable in the future, and reported in a different way.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It always returns 0. Change return type to void.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Generate a unique 128bit identifier for each host and pass that value to
firmware in the INIT_HCA command if it reports the sw_owner_id
capability. Each device bound to the mlx5_core driver will have the same
software owner ID.

In subsequent patches mlx5_core devices will be bound via a new VPort
command so that they can operate together under a single InfiniBand
device. Only devices that have the same software owner ID can be bound,
to prevent traffic intended for one host arriving at another.

The INIT_HCA command length was expanded by 128 bits. The command
length is provided as an input FW commands. Older FW does not have a
problem receiving this command in the new longer form.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There are two potential problems with the existing implementation.

1. Enable and disable can race after the atomic operations.
2. If a command fails the refcount is left in an inconsistent state.

Introduce a lock and perform error checking.

Fixes: a6f7d2af ("net/mlx5: Add support for multiple RoCE enable")
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.

The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.

A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

DC Initiator (DCI) QP is represented like any other QP in the hardware.
However, like any other transport QP there are attributes and settings
that are special to DCI QP and needs specific attention and care.
Make necessary changes to configure DCI QP.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.

Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().

Downstream patches from this series will add support for both DCI and
DCT driver QPs.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Vendors can implement type of QPs that are not described in the
InfiniBand specification. To still be able to use the IB/core layer
services (e.g. user object management) without tainting this layer with
driver proprietary logic, a new QP type is added - IB_QPT_DRIVER. This
will be a general QP type that the core layer doesn't know about its true nature.
When a command like create_qp() is passed to a hardware driver the extra
data that is required is taken from the driver channel.
Downstream patches from this series will use that QP type in the mlx5
driver.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable DC transport in the firmware to provide its functionality.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a missing command interface to work with a DCT. It includes: creating,
destroying and get events for.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Reporting that a device doesn't support RoCE seems like a valuable piece
of information to have when trying to determine why a driver is not binding
to a device. Better to report this at info log level instead of requiring
a user to enable all debug messages in the driver.
Signed-off-by: NJonathan Toppins <jtoppins@redhat.com>
Acked-By: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The cases for FDR/EDR signalling speed, were missing in
ib_rate_to_mult and mult_to_ib_rate giving wrong return values when
drivers convert static rate to/from inter-packet-delay.
Signed-off-by: NHans Westgaard Ry <hans.westgaard.ry@oracle.com>
Reviewed-by: NHåkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

i40iw_wait_pe_ready is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with msleep,
to reduce busy wait.
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds static trace for RNRNAK timer. Currently the output from
hrtimer static trace only shows the addresses of hrtimers in the system
and there is no easy way to correlate an RNRNAK timer with its entries in
the hrtimer trace. This patch adds the correlation among a QP, its RNRNAK
timer, and its entries in the hrtimer trace. This correlation will be
enormously helpful when debugging RNRNAK related issues. In addition, this
patch cleans up rvt_stop_rnr_timer() to be void while here.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The get_unit_name() function crafts a string based on the device name
and the device unit number.  It then stores this in a static variable.

This has concurrency issues as can be seen with this log:

hfi1 0000:02:00.0: hfi1_1: read_idle_message: read idle message 0x203
hfi1 0000:01:00.0: hfi1_1: read_idle_message: read idle message 0x203

The PCI device ID (0000:02:00.0 vs. 0000:01:00.0) is correct for the
message, but the device string hfi1_1 is incorrect (it should be
hfi1_0 for the second log message).

Remove get_unit_name() function.

Instead, use the rvt accessor rvt_get_ibdev_name() to get the IB name
string.

Clean up any hfi1_early_xx calls that can now use the new path.

QIB has the same (qib_get_unit_name()) issue.  Updating as necessary.

Remove qib_get_unit_name() function.

Update log message that has redundant device name.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

CQ allocation does not ensure that completion queue entries
and the completion queue structure are allocated on the correct
numa node.

Fix by allocating the rvt_cq and kernel CQ entries on the device node,
leaving the user CQ entries on the default local node.  Also ensure
CQ resizes use the correct allocator when extending a CQ.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When an 8051 command times out, the entire DC block is restarted. During
the restart, the host interface version bit is set, which calls
do_8051_command() recursively. The host version bit needs to be set
before the link moves into polling, so the host version bit can be set
in set_local_link_attributes() instead. Thus, the 8051 command functions
can be simplied as a non-locking version (dd->dc8051_lock) of those
functions are no longer needed.

Fixes: 9be6a5d7 ("IB/hfi1: Prevent LNI out of sync by resetting host interface version")
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Normal receive queue allocation ensures that kernel receive queues
are allocated on the local numa node. Shared receive queues
do not behave the same way.

Ensure that kernel shared receive queues are allocated on the device
local node.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdmavt has a down call to client drivers to retrieve a crafted card
name.

This name should be the IB defined name.

Rather than craft the name each time it is needed, simply retrieve
the IB allocated name from the IB device.

Update the function name to reflect its application.

Clean up driver code to match this change.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently the HFI and QIB drivers allow the IB core to assign a unit
number to the driver name string.

If multiple devices exist in a system, there is a possibility that the
device unit number and the IB core number will be mismatched.

Fix by using the driver defined unit number to generate the device
name.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the rdmavt's RNRNAK timer is fired, it tries to cancel the timer by
calling hrtimer_try_to_cancel(), which always returns -1 because the timer
is currently running. This patch removes this useless call.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Eliminate the WARN_ONs that create following two warnings when
registering an rxe device:

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_register_device+0x591/0x640 [ib_core]
Call Trace:
 rxe_register_device+0x3c6/0x470 [rdma_rxe]
 rxe_add+0x543/0x5e0 [rdma_rxe]
 rxe_net_add+0x37/0xb0 [rdma_rxe]
 rxe_param_set_add+0x5a/0x120 [rdma_rxe]
 param_attr_store+0x5e/0xc0
 module_attr_store+0x19/0x30
 sysfs_kf_write+0x3d/0x50
 kernfs_fop_write+0x116/0x1a0
 __vfs_write+0x23/0x120
 vfs_write+0xbe/0x1b0
 SyS_write+0x44/0xa0
 entry_SYSCALL_64_fastpath+0x23/0x9a

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Tainted: G        W        4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core]
Call Trace:
 ib_register_device+0x3f7/0x640 [ib_core]
 rxe_register_device+0x3c6/0x470 [rdma_rxe]
 rxe_add+0x543/0x5e0 [rdma_rxe]
 rxe_net_add+0x37/0xb0 [rdma_rxe]
 rxe_param_set_add+0x5a/0x120 [rdma_rxe]
 param_attr_store+0x5e/0xc0
 module_attr_store+0x19/0x30
 sysfs_kf_write+0x3d/0x50
 kernfs_fop_write+0x116/0x1a0
 __vfs_write+0x23/0x120
 vfs_write+0xbe/0x1b0
 SyS_write+0x44/0xa0
 entry_SYSCALL_64_fastpath+0x23/0x9a

The code should accept either a parent pointer or a fully specified DMA
specification without producing warnings.

Fixes: 99db9494 ("IB/core: Remove ib_device.dma_device")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Unconditional locks/list and ODP srcu initialization should be done in
the INIT stage. Remove those from the CAPS stage and move them to the
proper stage.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The loopback stage only initializes a lock, move it to be in
the CAPS initialization phase and get rid loopback step completely.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that we have a stage just for hardware counters, move all relevant
initialization logic into one place.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that we have a stage just for ODP, move all relevant
initialization logic into one place.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that we have a stage just for RoCE/ETH, move all relevant
initialization logic into one place.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Today we have single function which is used when we add an IB interface,
break this function into multiple functions.

Create stages and a generic mechanism to execute each stage.
This is in preparation for RDMA/IB representors which might not need
all stages or will do things differently in some of the stages.

This patch doesn't change any functionality.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When debugging issues with RC QPs, it is useful to know if a QP
has an associated RQ or SRQ, the size of the RQ, and any RNR timeout
values.

Add the necessary information to the QP stats output.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It needs to create eight reserve QPs for resolving
a bug of hip06. When deregistering mr, it will issue
a rdma write for every reserve QPs.

When modify qp from init to rtr, it needs to set
the value of dest_qp_num. Otherwise, it will lead
an error of freeing mr.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The QP can accept send work requests only when the QP is
in the states that allow them to be submitted.

This patch updates the QP state judgement based on the
specification.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NShaobo Xu <xushaobo2@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When the length of sge is zero, the driver need to filter it
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch refactors the code of setting access flags
for RDMA operation as well as adds the scene when
attr->max_dest_rd_atomic is zero.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch fixes the usage with sr_max filed and rr_max of qp
context when modify qp. Its modifications include:
1. Adjust location of filling sr_max filed of qpc
2. Only assign the number of responder resource if
   IB_QP_MAX_DEST_RD_ATOMIC bit is set
3. Only assign the number of outstanding resource if
   IB_QP_MAX_QP_RD_ATOMIC
4. Fix the assgin algorithms for the field of sr_max
   and rr_max of qp context
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch mainly implement rq inline data feature for hip08
RoCE in kernel mode.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If IB_CQ_REPORT_MISSED_EVENTS flag is passed in ib_req_notify_cq()
it may return positive value indicating non-empty CQ.
If return code not verified the log might be flooded with false
warning messages "request notify on send CQ failed".

Fixes: 8966e28d ("IB/ipoib: Use NAPI in UD/TX flows")
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NAlex Estrin <alex.estrin@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The commit 1a1c116f ("RDMA/netlink: Simplify the put_msg and put_attr")
removes nlmsg_len calculation in ibnl_put_attr causing netlink messages and
caused to miss source and destination addresses.

Fixes: 1a1c116f ("RDMA/netlink: Simplify the put_msg and put_attr")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The NLDEV commands are using IB device indexes and names as a handle
for netlink communications. Put all relevant code into one function
to remove code duplication in followup patches.
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>