- 24 4月, 2008 40 次提交
-
-
由 Mark Brown 提交于
When logging register changes in DAPM debug output include the register number. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jiang zhe 提交于
Please refer to [0003848] on the alsa mantis. This patch adds the pci quirk and Mic-Int controller. Signed-off-by: NJiang zhe <zhe.jiang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
On the Xonar DX, initialize all bits of the two-wire control register. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add a mixer control for switching whatever it is that is connected to GPIO pin 1 on the Xonar DX. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
If the card model does not have a digital input or an AC97 codec, disable the respective interrupt and mixer controls. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
When selecting the capture source on the Xonar DX, the input jack must be routed to either the line input or the microphone input by setting a GPIO pin. This requires an additional callback so that the model driver can hook into the toggling of AC97 switches. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add support for the Asus Xonar DX. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Fix a (fortunately harmless) typo. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Change the card short name to show to show the card name instead of the chip name. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
When playing data at 96 kHz or higher, reduce the DAC oversampling rate to 32. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Move the code that is common to all Xonar models to a separate function, and make it more generic in preparation for another model. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Rename all CS5381 symbols to CS53x1 because they can also be used for Xonar models with a CS5361. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Use separate model structures for the D2 and D2X so that the init function does not have to check for the model again. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add a function to write I2C registers. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
"GPL 2" does not mean that there have to be two MODULE_LICENSE("GPL") entries. ;-) Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Pavel Machek 提交于
Two sentences seem to be spliced into one in comment, fix that and fix english. Also fix codingstyle. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly like on Xonar cards, so move the Xonar code to the common mixer code. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Add support for mic automute in clevo-m720r ALC883 model, and rename it to more generic clevo-m720. Also change model entry in ALSA-Configuration.txt accordingly. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Map clevo-m720r ALC883 model for Clevo M720SR. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Stas Sergeev 提交于
pcsp: remove S16->U8 downsampling as dmix now supports U8 natively. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
free_irq() must be called first to avoid races at removal. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Forgot one more: 3stack-hp model also have now the same mixer as 3stack-6ch (after DAC assignment fix in ALC883), so use it avoiding duplicating the same mixer definition. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
After DAC assignment fix in ALC883, alc888_6st_dell_mixer is now the same as alc883_base_mixer. Avoid duplicated code and use alc883_base_mixer in 6stack-dell model, removing alc888_6st_dell_mixer definition. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
After DAC assignment fix in ALC883, the 6stack-hp model is now the same as 6stack-dig. So just remove 6stack-hp model and replace its use with 6stack-dig. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jiang zhe 提交于
This model is to support the Lenovo 3000 y410. ALSA bug#3856: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3856Signed-off-by: NJiang zhe <zhe.jiang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Added missing DMIC verb to dell_4_1_pin_configs[]. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Pavel Hofman 提交于
* moving most of clock-specific code to card-specific routines * support for ESI Juli * to-be-researched - monitoring of analog/digital inputs Signed-off-by: NPavel Hofman <dustin@seznam.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andrew Morton 提交于
sparc64: sound/pci/pcxhr/pcxhr.c: In function `pcxhr_update_r_buffer': sound/pci/pcxhr/pcxhr.c:459: warning: cast to pointer from integer of different size sound/pci/pcxhr/pcxhr.c: In function `pcxhr_trigger_tasklet': sound/pci/pcxhr/pcxhr.c:628: warning: long int format, different type arg (arg 4) Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andrew Morton 提交于
sound/pci/pcxhr/pcxhr_core.c: In function `pcxhr_set_pipe_state': sound/pci/pcxhr/pcxhr_core.c:899: warning: long int format, different type arg (arg 4) suseconds_t is int on sparc64. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Andrew Morton 提交于
sparc32: sound/pci/aw2/aw2-alsa.c: In function 'snd_aw2_create': sound/pci/aw2/aw2-alsa.c:282: error: 'DMA_32BIT_MASK' undeclared (first use in this function) sound/pci/aw2/aw2-alsa.c:282: error: (Each undeclared identifier is reported only once sound/pci/aw2/aw2-alsa.c:282: error: for each function it appears in.) Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Disable the master clock outputs of any unused I2S inputs. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Put the flag that enables the MIDI port into the model structure instead of passing it as a separate parameter to oxygen_pci_probe(). Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Allow the model drivers to specify if the codec communication goes over SPI or a 2-wire bus. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
When specifying which PCM devices to use, model drivers now use flags that also specify the routing between PCM devices and DMA channels instead of just DMA channel bits. This simplifies some code that checks for these flags. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add controls to enable monitoring of the analog and digital inputs. To allow monitoring after loading the driver when nothing has been played back or recorded yet, the I2S input and outputs are initialized to a valid configuration. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Move the PCM1796 register symbol definitions to their own header file. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Move the WM8786 register symbol definitions to their own header file. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Timur Tabi 提交于
With commit 9004acc7, include/sound/driver.h is deprecated. This patch removes the #include from fsl_ssi.c and fsl_dma.c. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Addded the support of sync streams to hda-intel driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-