- 06 7月, 2008 9 次提交
-
-
由 Denis V. Lunev 提交于
dst cache is marked as expired on the per/namespace basis by previous path. Right now we have to implement selective cache shrinking. This procedure has been ported from older OpenVz codebase. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Basically, there is no difference to atomic_read internally or pass it as a parameter as rt_hash is inline. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
flush delay is used as an external storage for net.ipv4.route.flush sysctl entry. It is write-only. The ctl_table->data for this entry is used once. Fix this case to point to the stack to remove global variable. Do this to avoid additional variable on struct net in the next patch. Possible race (as it was before) accessing this local variable is removed using flush_mutex. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
This is required to pass namespace context into rt_cache_flush called from ->flush_cache. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2008 14 次提交
-
-
由 Rusty Russell 提交于
Add a IFF_VNET_HDR flag. This uses the same ABI as virtio_net (ie. prepending struct virtio_net_hdr to packets) to indicate GSO and checksum information. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NMax Krasnyansky <maxk@qualcomm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
ethtool is useful for setting (some) device fields, but it's root-only. Finer feature control is available through a tun-specific ioctl. (Includes Mark McLoughlin <markmc@redhat.com>'s fix to hold rtnl sem). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NMax Krasnyansky <maxk@qualcomm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rusty Russell 提交于
The problem with introducing checksum offload and gso to tun is they need to set dev->features to enable GSO and/or checksumming, which is supposed to be done before register_netdevice(), ie. as part of TUNSETIFF. Unfortunately, TUNSETIFF has always just ignored flags it doesn't understand, so there's no good way of detecting whether the kernel supports new IFF_ flags. This patch implements a TUNGETFEATURES ioctl which returns all the valid IFF flags. It could be extended later to include other features. Here's an example program which uses it: #include <linux/if_tun.h> #include <sys/types.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <fcntl.h> #include <err.h> #include <stdio.h> static struct { unsigned int flag; const char *name; } known_flags[] = { { IFF_TUN, "TUN" }, { IFF_TAP, "TAP" }, { IFF_NO_PI, "NO_PI" }, { IFF_ONE_QUEUE, "ONE_QUEUE" }, }; int main() { unsigned int features, i; int netfd = open("/dev/net/tun", O_RDWR); if (netfd < 0) err(1, "Opening /dev/net/tun"); if (ioctl(netfd, TUNGETFEATURES, &features) != 0) { printf("Kernel does not support TUNGETFEATURES, guessing\n"); features = (IFF_TUN|IFF_TAP|IFF_NO_PI|IFF_ONE_QUEUE); } printf("Available features are: "); for (i = 0; i < sizeof(known_flags)/sizeof(known_flags[0]); i++) { if (features & known_flags[i].flag) { features &= ~known_flags[i].flag; printf("%s ", known_flags[i].name); } } if (features) printf("(UNKNOWN %#x)", features); printf("\n"); return 0; } Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NMax Krasnyansky <maxk@qualcomm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'net-next-2.6-v6ready-20080703' of git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-next
-
由 YOSHIFUJI Hideaki 提交于
ip{,v6}_mroute_{set,get}sockopt() should not matter by optimization but it would be better not to depend on optimization semantically. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Wang Chen 提交于
Same as ip6_mr_init(), make ip_mr_init() return errno if fails. But do not do error handling in inet_init(), just print a msg. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Wang Chen 提交于
If do not do it, we will get following issues: 1. Leaving junks after inet6_init failing halfway. 2. Leaving proc and notifier junks after ipv6 modules unloading. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Outgoing interface is selected by the route decision if unspecified. Let's prefer routes via interface(s) with the address assigned if we have multiple routes with same cost. With help from Naohiro Ooiwa <nooiwa@miraclelinux.com>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
- If 0, disable DAD. - If 1, perform DAD (default). - If >1, perform DAD and disable IPv6 operation if DAD for MAC-based link-local address has been failed (RFC4862 5.4.5). We do not follow RFC4862 by default. Refer to the netdev thread entitled "Linux IPv6 DAD not full conform to RFC 4862 ?" http://www.spinics.net/lists/netdev/msg52027.htmlSigned-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Handle interface property strictly when looking up a route for the loopback address (RFC4291 2.5.3). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
RFC4291 2.5.2. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Check the type of the address when adding a new one on interface. - the unspecified address (::) is always disallowed (RFC4291 2.5.2) - the loopback address is disallowed unless the interface is (one of) loopback (RFC4291 2.5.3). - multicast addresses are disallowed. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Pavel Emelyanov 提交于
There are some places in TCP that select one MIB index to bump snmp statistics like this: if (<something>) NET_INC_STATS_BH(<some_id>); else if (<something_else>) NET_INC_STATS_BH(<some_other_id>); ... else NET_INC_STATS_BH(<default_id>); or in a more tricky but still similar way. On the other hand, this NET_INC_STATS_BH is a camouflaged increment of percpu variable, which is not that small. Factoring those cases out de-bloats 235 bytes on non-preemptible i386 config and drives parts of the code into 80 columns. add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-235 (-235) function old new delta tcp_fastretrans_alert 1437 1424 -13 tcp_dsack_set 137 124 -13 tcp_xmit_retransmit_queue 690 676 -14 tcp_try_undo_recovery 283 265 -18 tcp_sacktag_write_queue 1550 1515 -35 tcp_update_reordering 162 106 -56 tcp_retransmit_timer 990 904 -86 Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2008 4 次提交
-
-
由 Santwona Behera 提交于
Implemented ethtool callback functions for configuring receive flow hashing in the niu driver. Signed-off-by: NSantwona Behera <santwona.behera@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Santwona Behera 提交于
Added new interfaces to ethtool to configure receive network flow distribution across multiple rx rings using hashing. Signed-off-by: NSantwona Behera <santwona.behera@sun.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Socket options SCTP_GET_PEER_ADDR_OLD, SCTP_GET_PEER_ADDR_NUM_OLD, SCTP_GET_LOCAL_ADDR_OLD, and SCTP_GET_PEER_LOCAL_ADDR_NUM_OLD have been replaced by newer versions a since 2005. It's time to officially deprecate them and schedule them for removal. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Convert the sysctl values for icmp ratelimit to use milliseconds instead of jiffies which is based on kernel configured HZ. Internal kernel jiffies are not a proper unit for any userspace API. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2008 2 次提交
-
-
由 David S. Miller 提交于
-
由 David S. Miller 提交于
-
- 28 6月, 2008 11 次提交
-
-
由 Jeff Garzik 提交于
synchronize_irq() is superfluous when free_irq() call immediately follows it, because free_irq() also does a synchronize_irq() call of its own. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Clean up config/burst value arch-specific setup. * bcrvalue only varied by its big-endian bit * crvalue only varied for certain types of x86-32 chips This should make fealnx quite a bit more portable, without any behavior change. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Harvey Harrison 提交于
DE_UNALIGNED_16 is always being passed a u16 *, no need to have the wrapper with two casts in it, just call get_unaligned directly. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tobias Diedrich 提交于
This patch is the minimal amount of code needed to support wake-on-lan in platform mode properly (i.e. "ethtool -s eth0 wol g" is sufficient, no additional magic needed) for me. This is derived from David Brownells patch (http://lists.laptop.org/pipermail/devel/2007-April/004691.html). However I decided to move the hook into pci-acpi.c since the other two pci hooks also live there and pci and acpi are the only users of the platform_enable_wakeup-hook. As a 'side-effect' this also makes wake on usb activity work for me and I had to disable usb wakeup (which is enabled by default) using the power/wakeup sysfs functionality ("echo disabled > ${sysfs_path_to_device}/power/wakeup"). (BTW I first thought the 'immediate reboot because of usb wake' effect is caused by the optical mouse generating a wake event, but it rather seems to be a problem with a flaky secondary usb host controller, which sees a connected device where nothing is attached) Signed-off-by: NTobias Diedrich <ranma+kernel@tdiedrich.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tobias Diedrich 提交于
We currently don't signal the kernel we that this device can wake the system. Call device_init_wakeup() to correct this. Without this device_can_wakeup and device_may_wakeup will return incorrect values. Together with the minimized acpi wakeup patch (6/4 ;)), which will follow in the next mail, this really makes wake-on-lan work for me as expected (i.e. "ethtool -s eth0 wol g" is sufficient, no additional magic needed). Signed-off-by: NTobias Diedrich <ranma+kernel@tdiedrich.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Márton Németh 提交于
Clean up the following errors and warnings reported by checkpatch.pl: + ERROR: Macros with complex values should be enclosed in parenthesis + WARNING: __func__ should be used instead of gcc specific __FUNCTION__ + WARNING: plain inline is preferred over __inline__ + WARNING: Use #include <linux/io.h> instead of <asm/io.h> + WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> The changes were verified with by comparing the "objdump -d 8139too.ko" output which is exactly the same for the old and new version in case of config CONFIG_8139TOO=m, CONFIG_8139TOO_PIO=n, CONFIG_8139TOO_TUNE_TWISTER=n, CONFIG_8139TOO_8129=n, CONFIG_8139_OLD_RX_RESET=n. Software versions used: gcc 4.2.3, objdump 2.18.0.20080103, on elf32-i386. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jussi Kivilinna 提交于
Pass buffer length to rndis_command so that rndis_command can read full response buffer from device instead of max CONTROL_BUFFER_SIZE bytes. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Nobuhiro Iwamatsu 提交于
Fix compile error on sh_eth and remove base address macro. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Andy Gospodarek 提交于
The call to e1000_clean_tx_irq in e1000_netpoll can race with the call to e1000_clean_tx_irq in e1000_clean. With a small bit of tweaking to to netpoll_send_skb to simulate a system that was under extreme stress, I was able to reproduce these concurrent calls. This can result in multiple frees to the skbs on the tx ring buffer. Dropping this call from e1000_netpoll should be fine since we can rely on the calls in e1000_clean to do what is needed since napi will poll the hardware just after calling poll_controller. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Taku Izumi 提交于
This patch makes igb driver ioport-free. This corrects behavior in probe function so as not to request ioport resources as long as they are not really needed. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Taku Izumi 提交于
This patch makes e1000e driver ioport-free. This corrects behavior in probe function so as not to request ioport resources as long as they are not really needed. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-