- 27 8月, 2010 9 次提交
-
-
由 Jongpill Lee 提交于
This patch fixes on enable and ctrlbit of uclk1 and sclk_pwm. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jongpill Lee 提交于
This patch adds missed uart clocks for S5PV310/S5PC210. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jongpill Lee 提交于
This patch adds clk_sclk_apll so that fixes on clk_mout_apll. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jongpill Lee 提交于
This patch fixes on PLL setting for S5PV310/S5PC210. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds CMU block for S5PV310/S5PC210 clock. (CMU: Clock Management Unit) Of course, changed current clock addresses for it together. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch fixes typo 'IRQ_WTD' in the irqs.h of S5PV310. And minor update comments. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch adds default zreladdr of ARCH_S5PV310. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kyungmin Park 提交于
The S5PV310/S5PC210 has following three GPIO base addresses. Part1 Base Address=0x11400000 Part2 Base Address=0x11000000 Part3 Base Address=0x03860000 Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor edit of title] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Fix this warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' And removes the useless parens and white space. Reported-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
-
- 23 8月, 2010 1 次提交
-
-
由 Kyungmin Park 提交于
Silences following build warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 22 8月, 2010 1 次提交
-
-
由 Samuel Thibault 提交于
The "Configure" word tends to make user believe they have to say 'yes' to be able to choose the number of procs/nodes. "Enable" should be unambiguous enough. Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 8月, 2010 2 次提交
-
-
由 Miklos Szeredi 提交于
Fix uml compile error: include/linux/dma-mapping.h:145: error: redefinition of 'dma_get_cache_alignment' arch/um/include/asm/dma-mapping.h:99: note: previous definition of 'dma_get_cache_alignment' was here Introduced by commit 4565f017 ("dma-mapping: unify dma_get_cache_alignment implementations") Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Jeff Dike <jdike@addtoit.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kyungmin Park 提交于
Each board can override the default sdhci host capabilities. Some board has broken features by hardwares and support 8-bit bandwidth. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 8月, 2010 2 次提交
-
-
由 Daniel Kiper 提交于
Fix a boot crash when apic=debug is used and the APIC is not properly initialized. This issue appears during Xen Dom0 kernel boot but the fix is generic and the crash could occur on real hardware as well. Signed-off-by: NDaniel Kiper <dkiper@net-space.pl> Cc: xen-devel@lists.xensource.com Cc: konrad.wilk@oracle.com Cc: jeremy@goop.org Cc: <stable@kernel.org> # .35.x, .34.x, .33.x, .32.x LKML-Reference: <20100819224616.GB9967@router-fw-old.local.net-space.pl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Borislav Petkov 提交于
When testing cpu hotplug code on 32-bit we kept hitting the "CPU%d: Stuck ??" message due to multiple cores concurrently accessing the cpu_callin_mask, among others. Since these codepaths are not protected from concurrent access due to the fact that there's no sane reason for making an already complex code unnecessarily more complex - we hit the issue only when insanely switching cores off- and online - serialize hotplugging cores on the sysfs level and be done with it. [ v2.1: fix !HOTPLUG_CPU build ] Cc: <stable@kernel.org> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20100819181029.GC17171@aftab> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 19 8月, 2010 5 次提交
-
-
由 KUMANO Syuhei 提交于
Fix the return address of subsequent kretprobes when multiple kretprobes are set on the same function. For example: # cd /sys/kernel/debug/tracing # echo "r:event1 sys_symlink" > kprobe_events # echo "r:event2 sys_symlink" >> kprobe_events # echo 1 > events/kprobes/enable # ln -s /tmp/foo /tmp/bar (without this patch) # cat trace ln-897 [000] 20404.133727: event1: (kretprobe_trampoline+0x0/0x4c <- sys_symlink) ln-897 [000] 20404.133747: event2: (system_call_fastpath+0x16/0x1b <- sys_symlink) (with this patch) # cat trace ln-740 [000] 13799.491076: event1: (system_call_fastpath+0x16/0x1b <- sys_symlink) ln-740 [000] 13799.491096: event2: (system_call_fastpath+0x16/0x1b <- sys_symlink) Signed-off-by: NKUMANO Syuhei <kumano.prog@gmail.com> Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> LKML-Reference: <1281853084.3254.11.camel@camp10-laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 H. Peter Anvin 提交于
Fix dummy inline stubs for trampoline-related functions when no trampolines exist (until we get rid of the no-trampoline case entirely.) Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <4C6C294D.3030404@zytor.com>
-
由 Tony Luck 提交于
arch/ia64/kernel/process.c:636: error: conflicting types for ‘sys_execve’ commit d7627467 Make do_execve() take a const filename pointer Missed the declaration of sys_execve in the ia64 asm/unistd.h (perhaps because there is no reason for it to be there ... it might be a left over from the COMPAT code?). Just delete the conflicting version. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Joerg Roedel 提交于
This patch fixes machine crashes which occur when heavily exercising the CPU hotplug codepaths on a 32-bit kernel. These crashes are caused by AMD Erratum 383 and result in a fatal machine check exception. Here's the scenario: 1. On 32-bit, the swapper_pg_dir page table is used as the initial page table for booting a secondary CPU. 2. To make this work, swapper_pg_dir needs a direct mapping of physical memory in it (the low mappings). By adding those low, large page (2M) mappings (PAE kernel), we create the necessary conditions for Erratum 383 to occur. 3. Other CPUs which do not participate in the off- and onlining game may use swapper_pg_dir while the low mappings are present (when leave_mm is called). For all steps below, the CPU referred to is a CPU that is using swapper_pg_dir, and not the CPU which is being onlined. 4. The presence of the low mappings in swapper_pg_dir can result in TLB entries for addresses below __PAGE_OFFSET to be established speculatively. These TLB entries are marked global and large. 5. When the CPU with such TLB entry switches to another page table, this TLB entry remains because it is global. 6. The process then generates an access to an address covered by the above TLB entry but there is a permission mismatch - the TLB entry covers a large global page not accessible to userspace. 7. Due to this permission mismatch a new 4kb, user TLB entry gets established. Further, Erratum 383 provides for a small window of time where both TLB entries are present. This results in an uncorrectable machine check exception signalling a TLB multimatch which panics the machine. There are two ways to fix this issue: 1. Always do a global TLB flush when a new cr3 is loaded and the old page table was swapper_pg_dir. I consider this a hack hard to understand and with performance implications 2. Do not use swapper_pg_dir to boot secondary CPUs like 64-bit does. This patch implements solution 2. It introduces a trampoline_pg_dir which has the same layout as swapper_pg_dir with low_mappings. This page table is used as the initial page table of the booting CPU. Later in the bringup process, it switches to swapper_pg_dir and does a global TLB flush. This fixes the crashes in our test cases. -v2: switch to swapper_pg_dir right after entering start_secondary() so that we are able to access percpu data which might not be mapped in the trampoline page table. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> LKML-Reference: <20100816123833.GB28147@aftab> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Hans Rosenfeld 提交于
A bug in the family-model-stepping matching code caused the presence of errata to go undetected when OSVW was not used. This causes hangs on some K8 systems because the E400 workaround is not enabled. Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com> LKML-Reference: <1282141190-930137-1-git-send-email-hans.rosenfeld@amd.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 18 8月, 2010 6 次提交
-
-
由 Zhang, Yanmin 提交于
Fix the Errata AAK100/AAP53/BD53 workaround, the officialy documented workaround we implemented in: 11164cd4: perf, x86: Add Nehelem PMU programming errata workaround doesn't actually work fully and causes a stuck PMU state under load and non-functioning perf profiling. A functional workaround was found by trial & error. Affects all Nehalem-class Intel PMUs. Signed-off-by: NZhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1281073148.2125.63.camel@ymzhang.sh.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@kernel.org> # .35.x Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Kulikov Vasiliy 提交于
arch/m68knommu/kernel/process.c: formatting of pointers in printk() Use %p instead of %08x in printk(). Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Jate Sujjavanich 提交于
The arch/m68k/include/asm/ide.h produces errors when the IDE driver is compiled for my 523x uClinux system under kernel. The header makes some redefines of operators not defined in the arch/m68k/include/asm/io_no.h header. There are no separate mmio and iospace defines. Signed-off-by: NJate Sujjavanich <jsujjavanich@syntech-fuelmaster.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
由 David Howells 提交于
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Should return 'long' instead of 'int'. Thanks to Dimitris Michailidis and Tony Luck. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
As noticed by Linus, it is critical that some of the rwsem constants be signed. Yet, hex constants are unsigned unless explicitly casted or negated. The most critical one is RWSEM_WAITING_BIAS. This bug was exacerbated by commit 424acaae ("rwsem: wake queued readers when writer blocks on active read lock") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 8月, 2010 8 次提交
-
-
由 Xiao Guangrong 提交于
Free irq source id if create pit workqueue fail Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Grant Likely 提交于
This patch fixes missing includes from a number of .c files because the code (wrongfully) depended on prom.h including them. The include of linux/of_address.h was removed in microblaze prom.h in commit "of/address: Clean up function declarations" (sha1 id 22ae782f), but not fixed in some callers. This patch fixes them up. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Tested-by: NMichal Simek <monstr@monstr.eu>
-
由 David S. Miller 提交于
The only tricky bit is the compat version of fanotify_mark, which which on 32-bit the 64-bit mark argument is passed in as "high32", "low32". Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Miao 提交于
According to commit 22eeef4b kgdb,arm: Individual register get/set for arm It's now replaced by DBG_MAX_REG_NUM. Signed-off-by: NEric Miao <eric.y.miao@gmail.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Namhyung Kim 提交于
breakinfo->pev is a pointer to percpu pointer but was missing __percpu markup. Add it. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Michal Simek 提交于
Commit 58f9b0b0 should contain this fix too. Signed-off-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Michal Simek 提交于
Commit dbbdee94 removed of_irq_pci_swizzle but didn't use pci_swizzle_interrupt_pin instead. Signed-off-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 David S. Miller 提交于
If a video head and keyboard are hooked up, specifying "console=ttyS0" or similar to use a serial console will not work properly. The key issue is that we must register all serial console capable devices with register_console(), otherwise the command line specified device won't be found. The sun serial drivers would only register themselves as console devices if the OpenFirmware specified console device node matched. To fix this part we now unconditionally get the serial console register by setting serial_drv->cons always. Secondarily we must not add_preferred_console() using the firmware provided console setting if the user gaven an override on the kernel command line using "console=" The "primary framebuffer" matching logic was always triggering o n openfirmware device node match, make it not when a command line override was given. Reported-by: NFrans Pop <elendil@planet.nl> Tested-by: NFrans Pop <elendil@planet.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 8月, 2010 4 次提交
-
-
由 Russell King 提交于
Reviewed-by: NArve Hjønnevåg <arve@android.com> Acked-by: NDima Zavin <dima@android.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mikael Pettersson 提交于
sys_accept4() was added in kernel 2.6.28, but ARM was not updated to include it. The number and types of parameters is such that no ARM-specific processing is needed, so wiring up sys_accept4() just requires defining __NR_accept4 and adding a direct call in the syscall entry table. Tested with an EABI 2.6.35 kernel and Ulrich Drepper's original accept4() test program, modified to define __NR_accept4 for ARM. Using the updated unistd.h also eliminates a warning then building glibc (2.10.2 and newer) about accept4() being unimplemented. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Chris Metcalf 提交于
With this change, the arch/tile Makefile will only check for a valid combination of CROSS_COMPILE vs "uname -m" for a few common targets that are typically the ones we get wrong (vmlinux, all, and modules). The change handles the case of an empty "make" goal like "make all". Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Chris Metcalf 提交于
This fixes a failure in "make headers_check" for tile. I hadn't realized this file was exported to userspace by default. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 15 8月, 2010 2 次提交
-
-
由 Chris Metcalf 提交于
See commit a6eb9fe1. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-
由 Xiaotian Feng 提交于
kernel needs to destroy workqueue if kvm_create_pit() fails, otherwise after pit is freed, the workqueue is leaked. Signed-off-by: NXiaotian Feng <dfeng@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gregory Haskins <ghaskins@novell.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-