- 16 11月, 2007 16 次提交
-
-
由 Maciej W. Rozycki 提交于
The GNU `config.guess' uses "linux-gnu" as the canonical system name. Fix the list of compiler prefixes checked to spell it correctly. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Nigel Stephens 提交于
Adds a JR.HB after halting a TC, to ensure that the TC has really halted. only modifies the TCSTATUS register when the TC is safely halted. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
We have no guarantee by the generic time code that the timer is stopped when the ->next_event method is called. Modifying the Timer Initial Count register while the timer is enabled has UNPREDICTABLE effect according to the BCM1250/BCM1125/BCM1125H User Manual. So stop the timer before reprogramming. This is a paranoia fix; no ill effects have been observed previously. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
For the old minimum of a single tick a value of zero would be programmed into the init value register which in the BCM1250/BCM1125/BCM1125H User Manual in the Timer Special Cases section is documented to have UNPREDICTABLE effect. Observable sympthoms of this bug were hangs of several seconds on the console during bootup and later if both dyntick and highres timer options were activated. In theory contiguous mode of the timers is also affected but in an act of hopeless lack of realism I'll assume nobody will ever configure a KERNEL for HZ > 500kHz but if so I leave that to evolution to sort out. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
The range of MIPS_CPU IRQ and the range of LASAT IRQ overlap. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Shadow register support would not possibly have worked on multicore systems. The support code for it was also depending not on MIPS R2 but VSMP or SMTC kernels even though it makes perfect sense with UP kernels. SR sets are a scarce resource and the expected usage pattern is that users actually hardcode the register set numbers in their code. So fix the allocator by ditching it. Move the remaining CPU probe bits into the generic CPU probe. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This avoids us executing an mfc0 c0_count instruction on processors which don't have but also on certain R4000 and R4400 versions where reading from the count register just in the very moment when its value equals c0_compare will result in the timer interrupt getting lost. There is still a number of users of get_cycles remaining outside the arch code: crypto/tcrypt.c: start = get_cycles(); crypto/tcrypt.c: end = get_cycles(); crypto/tcrypt.c: start = get_cycles(); crypto/tcrypt.c: end = get_cycles(); crypto/tcrypt.c: start = get_cycles(); crypto/tcrypt.c: end = get_cycles(); drivers/char/hangcheck-timer.c: return get_cycles(); drivers/char/hangcheck-timer.c: printk("Hangcheck: Using get_cycles().\n"); drivers/char/random.c: sample.cycles = get_cycles(); drivers/input/joystick/analog.c:#define GET_TIME(x) do { x = get_cycles(); } include/linux/arcdevice.h: _x = get_cycles(); \ include/linux/arcdevice.h: _y = get_cycles(); \ mm/slub.c: if (!s->defrag_ratio || get_cycles() % 1024 > s->defrag_ratio) mm/slub.c: p += 64 + (get_cycles() & 0xff) * sizeof(void *); Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Roel Kluin 提交于
iounmap if pci clock is over 33MHz. Cosmetic because the iomap() in this case is just a bit of address magic. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Acked-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Or strange things will happen. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This was crashing the combination of highmem and sparsemem. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
The recent switch of the Sibyte SOCs from the processor specific cache managment code in c-sb1.c to c-r4k.c lost this old hack [MIPS] Hack for SB1 cache issues Removing flush_icache_page a while ago broke SB1 which was using an empty flush_data_cache_page function. This glues things well enough so a more efficient but also more intrusive solution can be found later. Signed-Off-By: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> in the hope it was no longer needed. As it turns it still is so resurrect it until there is a better solution. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 15 11月, 2007 24 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] geode: Fix not inplace encryption
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Fix thinko in QP destroy (incorrect bitmap_free) RDMA/cxgb3: Set the max_qp_init_rd_atom attribute in query_device IB/ehca: Fix static rate calculation IB/ehca: Return physical link information in query_port() IB/ipath: Fix race with ACK retry timeout list management IB/ipath: Fix memory leak in ipath_resize_cq() if copy_to_user() fails mlx4_core: Fix possible bad free in mlx4_buf_free()
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86: x86: enable "make ARCH=x86" x86: do not use $(ARCH) when not needed kconfig: use $K64BIT to set 64BIT with all*config targets kconfig: add helper to set config symbol from environment variable kconfig: factor out code in confdata.c x86: move the rest of the menu's to Kconfig x86: move all simple arch settings to Kconfig x86: copy x86_64 specific Kconfig symbols to Kconfig.i386 x86: add X86_64 dependency to x86_64 specific symbols in Kconfig.x86_64 x86: add X86_32 dependency to i386 specific symbols in Kconfig.i386 x86: arch/x86/Kconfig.cpu unification x86: start unification of arch/x86/Kconfig.* x86: unification of cfufreq/Kconfig
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: rt_check_expire() can take a long time, add a cond_resched() [ISDN] sc: Really, really fix warning [ISDN] sc: Fix sndpkt to have the correct number of arguments [TCP] FRTO: Clear frto_highmark only after process_frto that uses it [NET]: Remove notifier block from chain when register_netdevice_notifier fails [FS_ENET]: Fix module build. [TCP]: Make sure write_queue_from does not begin with NULL ptr [TCP]: Fix size calculation in sk_stream_alloc_pskb [S2IO]: Fixed memory leak when MSI-X vector allocation fails [BONDING]: Fix resource use after free [SYSCTL]: Fix warning for token-ring from sysctl checker [NET] random : secure_tcp_sequence_number should not assume CONFIG_KTIME_SCALAR [IWLWIFI]: Not correctly dealing with hotunplug. [TCP] FRTO: Plug potential LOST-bit leak [TCP] FRTO: Limit snd_cwnd if TCP was application limited [E1000]: Fix schedule while atomic when called from mii-tool. [NETX]: Fix build failure added by 2.6.24 statistics cleanup. [EP93xx_ETH]: Build fix after 2.6.24 NAPI changes. [PKT_SCHED]: Check subqueue status before calling hard_start_xmit
-
由 Jesper Nilsson 提交于
Scrap the local __INLINE__ macro, and rename timeval_cmp to fasttime_cmp. Inline macro was completely unnecessary since the macro was defined locally to be inline. timeval_cmp was inaccurately named since it does comparison on struct fasttimer_t and not on struct timeval. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Add \n\ at end of lines inside asm statement to avoid warning. No change except adding \n\ to end of line and correcting whitespace has been done. Removes warning about multi-line string literals when compiling arch/cris/arch-v10/lib/memset.c Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Add \n\ at end of lines inside asm statement to avoid warning. No change except adding \n\ to end of line and correcting whitespace has been done. Removes warning about multi-line string literals when compiling arch/cris/arch-v10/lib/string.c Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Removes warning when compiling arch/cris/arch-v10/lib/usercopy.c No change except adding \n\ on the end of the lines has been done. Removes warning about multi-line string literals. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Declare mac using DECLARE_MAC_BUF for use when calling print_mac(). This fixes compile error where mac was undeclared. Also, remove unused variable i. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Include linux/pagemap.h for release_pages and page_cache_release. Fixes compilation error in arch/cris/mm/init.c when CONFIG_SWAP is unset. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
These are needed due to a cache bug, and can be used to make sure that the DMA descriptors are flushed to memory and can be safely handled by DMA. flush_dma_descr - Flush one DMA descriptor. flush_dma_list - Flush a complete list of DMA descriptors. cris_flush_cache - Flush the complete cache. cris_flush_cache_range - Flush only the specified range Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Improve and bugfix CRIS v10 fast timers. - irq_handler_t now only takes two arguments. - Keep interrupts disabled as long as we have a reference to the fasttimer list and only enable them while doing the callback. del_fast_timer may be called from other interrupt context. - Fix bug where debug code could return without calling local_irq_restore. - Use jiffies instead of usec (change from struct timeval to fasttime_t). - Don't initialize static variables to zero. - Remove obsolete #ifndef DECLARE_WAITQUEUE code. - fast_timer_init should be __initcall. - Change status/debug variables to unsigned. - Remove CVS log and CVS id. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Fix timer interrupt parameters for CRIS v10. - irq_handler_t only takes two arguments, use get_irq_regs to get regs for profiling. - Call update_process_times. - Remove CVS tag. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Remove MTD_AMDSTD and MTD_OBSOLETE_CHIPS from defconfig, Kconfig and code, instead we'll use MTD_CFI or MTD_JEDECPROBE. [akpm@linux-foundation.org: codingl-style cleanups] Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
New and improved serial driver for CRISv10, take three, with improvements suggested by Jiri Slaby. - Call wait_event_interruptible with a _correct_ and sensible condition. - Removed superfluous test of info->flags & ASYNC_CLOSING, since that is done by wait_event_interruptible. - Moved common code for deregistering DMA and IRQ to deinit_port function. - Use setup_timer when initializing flush_timer. - Convert bit-field for uses_dma_in and uses_dma_out to regular bytes. - Removed CVS tags. - Removed defines and comments for CRIS_BUF_SIZE and TTY_THRESHOLD_THROTTLE (no longer used). - Cleaned up code to pass checkpatch. - Add crisv10.h header file. - Merge of CRISv10 from Axis internal CVS. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: NJiri Slaby <jirislaby@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
In file included from include/asm/byteorder.h:23, from include/asm-generic/bitops/le.h:5, from include/asm-generic/bitops/ext2-non-atomic.h:4, from include/asm/bitops.h:163, from include/linux/bitops.h:17, from include/asm/posix_types.h:55, from include/linux/posix_types.h:47, from include/linux/types.h:11, from include/linux/capability.h:16, from include/linux/sched.h:49, from arch/cris/kernel/asm-offsets.c:1: include/linux/byteorder/little_endian.h:43: parse error before "__cpu_to_le64p" include/linux/byteorder/little_endian.h:44: warning: return type defaults to `int' include/linux/byteorder/little_endian.h: In function `__cpu_to_le64p': include/linux/byteorder/little_endian.h:45: `__le64' undeclared (first use in this function) Remove include of asm/bitops.h, not needed here, corrects compilation error (__le64 undeclared). Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Unleashed 提交于
I'm converting most array size calculations under arch/ to use ARRAY_SIZE(). This is the patch for CRIS. Signed-off-by: NAlejandro Martinez Ruiz <alex@flawedcode.org> Cc: Mikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Remove some unused config lines, and add some others that needs to be off for a succesful compile. This is the minimal set of changes for 2.6.23. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
- Add __negdi2 to exported symbols. - Remove string functions from exported symbols. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Include linux/param.h for HZ. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
- Remove debug print. - Change #if to #ifdef to avoid compile time warning if CONFIG_PROFILING isn't set. - Number of parameters to profile_tick has changed, drop the regs parameter. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
Corrects compile errors and the following: - Remove oldset parameter from do_signal and do_notify_resume. - Modified to fit new consolidated IRQ handling code. - Reverse check order between external nmi and watchdog nmi to avoid false watchdog oops in case of a glitch on the nmi pin. - Return from an pin-generated NMI the same way as for other interrupts. - Moved blocking of ethernet rx/tx irq from ethernet interrupt handler to low-level asm interrupt handlers. Fixed in the multiple interrupt handler also. - Add space for thread local storage in thread_info struct. - Add NO_DMA to Kconfig, and include arch specific Kconfig using arch independent path. Include subsystem Kconfigs for pcmcia, usb, i2c, rtc and pci. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMikael Starvik <starvik@axis.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Fix locking bug noted by Roel Kluin <12o3l@tiscali.nl>. Cc: Jeff Garzik <jeff@garzik.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Nilsson 提交于
New (updated) version of ethernet driver for cris v10. - First steps to simplify and make the MII code more similar between the etrax100 and etraxfs ports. - Start the transmit queue before enabling tx interrupts to avoid race with the first frame. - Flip the comparition statement to stick to physical addresses to avoid phys_to_virt mapping a potential null pointer. This was not an error but the change simplifies debugging of address-space mappings. - Made myPrevRxDesc local to e100_rx since it was only used there. Fixed out of memory handling in e100_rx. If dev_alloc_skb() fails persistently the system is hosed anyway but at least it won't loop in an interrupt handler. - Correct some code formatting issues. - Add defines SET_ETH_ENABLE_LEDS, SET_ETH_DISABLE_LEDS and SET_ETH_AUTONEG used in new cris v10 ethernet driver. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMikael Starvik <starvik@axis.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-