- 22 12月, 2017 1 次提交
-
-
由 Hui Wang 提交于
There is a headset jack on the front panel, when we plug a headset into it, the headset mic can't trigger unsol events, and read_pin_sense() can't detect its presence too. So add this fixup to fix this issue. Cc: <stable@vger.kernel.org> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 12月, 2017 1 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'asoc-fix-v4.15-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.15 This is a fairly large set of fixes, they've been delayed partly as more and more keep coming in. Most of them are very small driver specific fixes, the biggest individual thing is the revert of the rcar IOMMU support - it was causing problems and there wasn't the confidence that it could be resolved sensibly. There's also a relatively large change in the Freescale SSI controller which resolves some issues with the AC'97 mode, these aren't that large in the grand scheme of things and reflect some fairly thorough review and testing.
-
- 20 12月, 2017 7 次提交
-
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/rt5663', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/twl4030' into asoc-linus
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/msm8916', 'asoc/fix/nau8825', 'asoc/fix/rt5514' and 'asoc/fix/rt5645' into asoc-linus
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/amd', 'asoc/fix/atmel', 'asoc/fix/da7218', 'asoc/fix/da7219', 'asoc/fix/fsl-asrc' and 'asoc/fix/fsl-ssi' into asoc-linus
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Kuninori Morimoto 提交于
BRGCKR should use 0x80770000, instead of 0x80FF0000. R-Car Gen2 xxx_TIMSEL should use 0x0F1F, R-Car Gen3 xxx_TIMSEL should use 0x1F1F. Here, Gen3 doesn't support AVD, thus, both case can use 0x0F1F. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 19 12月, 2017 3 次提交
-
-
由 Brian Norris 提交于
If an rt5514-spi device is probed but the platform hasn't linked it in, we might never fully request the SPI IRQ, nor configure the rt5514 DSP, but we still might try to enable the SPI IRQ (enable_irq_wake()). This is bad, and among other things, can cause the interrupt to trigger every time we try to suspend the system (e.g., because the interrupt trigger setting was never set properly). Instead of setting our wakeup capabilities in the SPI driver probe routine, let's wait until we've actually requested the IRQ. Fixes issues seen on the "kevin" Chromebook (Samsung Chromebook Plus). Fixes: 58f1c07d ("ASoC: rt5514: Voice wakeup support.") Signed-off-by: NBrian Norris <briannorris@chromium.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Abhijeet Kumar 提交于
In skylake platform, we hear a loud pop noise(0 dB) at start of audio capture power up sequence. This patch removes the pop noise from the recording by adding a delay before enabling ADC. Signed-off-by: NAbhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Takashi Iwai 提交于
The commit 89b89d12 ("ALSA: usb-audio: Add check return value for usb_string()") added the check of the return value from snd_usb_copy_string_desc(), which is correct per se, but it introduced a regression. In the original code, either the "Clock Source", "Playback Source" or "Capture Source" suffix is added after the terminal string, while the commit changed it to add the suffix only when get_term_name() is failing. It ended up with an incorrect ctl name like "PCM" instead of "PCM Capture Source". Also, even the original code has a similar bug: when the ctl name is generated from snd_usb_copy_string_desc() for the given iSelector, it also doesn't put the suffix. This patch addresses these issues: the suffix is added always when no static mapping is found. Also the patch tries to put more comments and cleans up the if/else block for better readability in order to avoid the same pitfall again. Fixes: 89b89d12 ("ALSA: usb-audio: Add check return value for usb_string()") Reported-and-tested-by: NMauro Santos <registo.mailling@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 12月, 2017 10 次提交
-
-
由 Kailang Yang 提交于
Dell AIO had LineOut jack. Add LineOut verb into this patch. [ Additional notes: the ALC274 codec seems requiring the fixed pin / DAC connections for HP / line-out pins for enabling EQ for speakers; i.e. the HP / LO pins expect to be connected with NID 0x03 while keeping the speaker with NID 0x02. However, by adding a new line-out pin, the auto-parser assigns the NID 0x02 for HP/LO pins as primary outputs. As an easy workaround, we provide the preferred_pairs[] to map forcibly for these pins. -- tiwai ] Fixes: 75ee94b2 ("ALSA: hda - fix headset mic problem for Dell machines with alc274") Signed-off-by: NKailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
由 Kees Cook 提交于
This reverts commit 04e35f44. SELinux runs with secureexec for all non-"noatsecure" domain transitions, which means lots of processes end up hitting the stack hard-limit change that was introduced in order to fix a race with prlimit(). That race fix will need to be redesigned. Reported-by: NLaura Abbott <labbott@redhat.com> Reported-by: NTomáš Trnka <trnka@scm.com> Cc: stable@vger.kernel.org Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull Page Table Isolation (PTI) v4.14 backporting base tree from Ingo Molnar: "This tree contains the v4.14 PTI backport preparatory tree, which consists of four merges of upstream trees and 7 cherry-picked commits, which the upcoming PTI work depends on" NOTE! The resulting tree is exactly the same as the original base tree (ie the diff between this commit and its immediate first parent is empty). The only reason for this merge is literally to have a common point for the actual PTI changes so that the commits can be shared in both the 4.15 and 4.14 trees. * 'WIP.x86-pti.base-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow locking/barriers: Convert users of lockless_dereference() to READ_ONCE() locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE() bpf: fix build issues on um due to mising bpf_perf_event.h perf/x86: Enable free running PEBS for REGS_USER/INTR x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD x86/cpufeature: Add User-Mode Instruction Prevention definitions
-
由 Linus Torvalds 提交于
Merge branch 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull Page Table Isolation (PTI) preparatory tree from Ingo Molnar: "This does a rename to free up linux/pti.h to be used by the upcoming page table isolation feature" * 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: drivers/misc/intel/pti: Rename the header file to free up the namespace
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Thomas Gleixner: "A single bugfix which prevents arbitrary sigev_notify values in posix-timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timer: Properly check sigevent->sigev_notify
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine fixes from Vinod Koul: "This time consisting of fixes in a bunch of drivers and the dmatest module: - Fix for disable clk on error path in fsl-edma driver - Disable clk fail fix in jz4740 driver - Fix long pending bug in dmatest driver for dangling pointer - Fix potential NULL pointer dereference in at_hdmac driver - Error handling path in ioat driver" * tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: fsl-edma: disable clks on all error paths dmaengine: jz4740: disable/unprepare clk if probe fails dmaengine: dmatest: move callback wait queue to thread context dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved dmaengine: ioat: Fix error handling path
-
由 Arnd Bergmann 提交于
With CONFIG_MTD=m and CONFIG_CRAMFS=y, we now get a link failure: fs/cramfs/inode.o: In function `cramfs_mount': inode.c:(.text+0x220): undefined reference to `mount_mtd' fs/cramfs/inode.o: In function `cramfs_mtd_fill_super': inode.c:(.text+0x6d8): undefined reference to `mtd_point' inode.c:(.text+0xae4): undefined reference to `mtd_unpoint' This adds a more specific Kconfig dependency to avoid the broken configuration. Alternatively we could make CRAMFS itself depend on "MTD || !MTD" with a similar result. Fixes: 99c18ce5 ("cramfs: direct memory access support") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "The alloc_super() one is a regression in this merge window, lazytime thing is older..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Handle lazytime in do_mount() alloc_super(): do ->s_umount initialization earlier
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Fix a regression which caused us to fail to interpret symlinks in very ancient ext3 file system images. Also fix two xfstests failures, one of which could cause an OOPS, plus an additional bug fix caught by fuzz testing" * tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix crash when a directory's i_size is too small ext4: add missing error check in __ext4_new_inode() ext4: fix fdatasync(2) after fallocate(2) operation ext4: support fast symlinks from ext3 file systems
-
- 17 12月, 2017 15 次提交
-
-
由 Andrey Ryabinin 提交于
[ Note, this is a Git cherry-pick of the following commit: d17a1d97: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow") ... for easier x86 PTI code testing and back-porting. ] The KASAN shadow is currently mapped using vmemmap_populate() since that provides a semi-convenient way to map pages into init_top_pgt. However, since that no longer zeroes the mapped pages, it is not suitable for KASAN, which requires zeroed shadow memory. Add kasan_populate_shadow() interface and use it instead of vmemmap_populate(). Besides, this allows us to take advantage of gigantic pages and use them to populate the shadow, which should save us some memory wasted on page tables and reduce TLB pressure. Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.comSigned-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Bob Picco <bob.picco@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Will Deacon 提交于
[ Note, this is a Git cherry-pick of the following commit: 506458ef ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()") ... for easier x86 PTI code testing and back-porting. ] READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it can be used instead of lockless_dereference() without any change in semantics. Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Will Deacon 提交于
[ Note, this is a Git cherry-pick of the following commit: 76ebbe78 ("locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()") ... for easier x86 PTI code testing and back-porting. ] In preparation for the removal of lockless_dereference(), which is the same as READ_ONCE() on all architectures other than Alpha, add an implicit smp_read_barrier_depends() to READ_ONCE() so that it can be used to head dependency chains on all architectures. Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1508840570-22169-3-git-send-email-will.deacon@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Daniel Borkmann 提交于
[ Note, this is a Git cherry-pick of the following commit: a23f06f0 ("bpf: fix build issues on um due to mising bpf_perf_event.h") ... for easier x86 PTI code testing and back-porting. ] Since c895f6f7 ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build on i386 or x86_64: [...] CC init/main.o In file included from ../include/linux/perf_event.h:18:0, from ../include/linux/trace_events.h:10, from ../include/trace/syscall.h:7, from ../include/linux/syscalls.h:82, from ../init/main.c:20: ../include/uapi/linux/bpf_perf_event.h:11:32: fatal error: asm/bpf_perf_event.h: No such file or directory #include <asm/bpf_perf_event.h> [...] Lets add missing bpf_perf_event.h also to um arch. This seems to be the only one still missing. Fixes: c895f6f7 ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type") Reported-by: NRandy Dunlap <rdunlap@infradead.org> Suggested-by: NRichard Weinberger <richard@sigma-star.at> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Tested-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Richard Weinberger <richard@sigma-star.at> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andi Kleen 提交于
[ Note, this is a Git cherry-pick of the following commit: a47ba4d7 ("perf/x86: Enable free running PEBS for REGS_USER/INTR") ... for easier x86 PTI code testing and back-porting. ] Currently free running PEBS is disabled when user or interrupt registers are requested. Most of the registers are actually available in the PEBS record and can be supported. So we just need to check for the supported registers and then allow it: it is all except for the segment register. For user registers this only works when the counter is limited to ring 3 only, so this also needs to be checked. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Rudolf Marek 提交于
[ Note, this is a Git cherry-pick of the following commit: 2b67799bdf25 ("x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD") ... for easier x86 PTI code testing and back-porting. ] The latest AMD AMD64 Architecture Programmer's Manual adds a CPUID feature XSaveErPtr (CPUID_Fn80000008_EBX[2]). If this feature is set, the FXSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES / FXRSTOR, XRSTOR, XRSTORS always save/restore error pointers, thus making the X86_BUG_FXSAVE_LEAK workaround obsolete on such CPUs. Signed-Off-By: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NBorislav Petkov <bp@suse.de> Tested-by: NBorislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Link: https://lkml.kernel.org/r/bdcebe90-62c5-1f05-083c-eba7f08b2540@assembler.czSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ricardo Neri 提交于
[ Note, this is a Git cherry-pick of the following commit: (limited to the cpufeatures.h file) 3522c2a6 ("x86/cpufeature: Add User-Mode Instruction Prevention definitions") ... for easier x86 PTI code testing and back-porting. ] User-Mode Instruction Prevention is a security feature present in new Intel processors that, when set, prevents the execution of a subset of instructions if such instructions are executed in user mode (CPL > 0). Attempting to execute such instructions causes a general protection exception. The subset of instructions comprises: * SGDT - Store Global Descriptor Table * SIDT - Store Interrupt Descriptor Table * SLDT - Store Local Descriptor Table * SMSW - Store Machine Status Word * STR - Store Task Register This feature is also added to the list of disabled-features to allow a cleaner handling of build-time configuration. Signed-off-by: NRicardo Neri <ricardo.neri-calderon@linux.intel.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chen Yucong <slaoub@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: ricardo.neri@intel.com Link: http://lkml.kernel.org/r/1509935277-22138-7-git-send-email-ricardo.neri-calderon@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Merge a minimal set of virt cleanups, for a base for the MM isolation patches. Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Conflicts: arch/x86/kernel/cpu/Makefile Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Pull in a minimal set of v4.15 entry code changes, for a base for the MM isolation patches. Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
We'd like to use the 'PTI' acronym for 'Page Table Isolation' - free up the namespace by renaming the <linux/pti.h> driver header to <linux/intel-pti.h>. (Also standardize the header guard name while at it.) Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Jason Gunthorpe: "More fixes from testing done on the rc kernel, including more SELinux testing. Looking forward, lockdep found regression today in ipoib which is still being fixed. Summary: - Fix for SELinux on the umad SMI path. Some old hardware does not fill the PKey properly exposing another bug in the newer SELinux code. - Check the input port as we can exceed array bounds from this user supplied value - Users are unable to use the hash field support as they want due to incorrect checks on the field restrictions, correct that so the feature works as intended - User triggerable oops in the NETLINK_RDMA handler - cxgb4 driver fix for a bad interaction with CQ flushing in iser caused by patches in this merge window, and bad CQ flushing during normal close. - Unbalanced memalloc_noio in ipoib in an error path" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/ipoib: Restore MM behavior in case of tx_ring allocation failure iw_cxgb4: only insert drain cqes if wq is flushed iw_cxgb4: only clear the ARMED bit if a notification is needed RDMA/netlink: Fix general protection fault IB/mlx4: Fix RSS hash fields restrictions IB/core: Don't enforce PKey security on SMI MADs IB/core: Bound check alternate path port number
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Two bugfixes for the AT24 I2C eeprom driver and some minor corrections for I2C bus drivers" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: piix4: Fix port number check on release i2c: stm32: Fix copyrights i2c-cht-wc: constify platform_device_id eeprom: at24: change nvmem stride to 1 eeprom: at24: fix I2C device selection for runtime PM
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client fixes from Anna Schumaker: "This has two stable bugfixes, one to fix a BUG_ON() when nfs_commit_inode() is called with no outstanding commit requests and another to fix a race in the SUNRPC receive codepath. Additionally, there are also fixes for an NFS client deadlock and an xprtrdma performance regression. Summary: Stable bugfixes: - NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a commit in the case that there were no commit requests. - SUNRPC: Fix a race in the receive code path Other fixes: - NFS: Fix a deadlock in nfs client initialization - xprtrdma: Fix a performance regression for small IOs" * tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: Fix a race in the receive code path nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests xprtrdma: Spread reply processing over more CPUs nfs: fix a deadlock in nfs client initialization
-
- 16 12月, 2017 3 次提交
-
-
由 Linus Torvalds 提交于
This reverts commits 5c9d2d5c, c7da82b8, and e7fe7b5c. We'll probably need to revisit this, but basically we should not complicate the get_user_pages_fast() case, and checking the actual page table protection key bits will require more care anyway, since the protection keys depend on the exact state of the VM in question. Particularly when doing a "remote" page lookup (ie in somebody elses VM, not your own), you need to be much more careful than this was. Dave Hansen says: "So, the underlying bug here is that we now a get_user_pages_remote() and then go ahead and do the p*_access_permitted() checks against the current PKRU. This was introduced recently with the addition of the new p??_access_permitted() calls. We have checks in the VMA path for the "remote" gups and we avoid consulting PKRU for them. This got missed in the pkeys selftests because I did a ptrace read, but not a *write*. I also didn't explicitly test it against something where a COW needed to be done" It's also not entirely clear that it makes sense to check the protection key bits at this level at all. But one possible eventual solution is to make the get_user_pages_fast() case just abort if it sees protection key bits set, which makes us fall back to the regular get_user_pages() case, which then has a vma and can do the check there if we want to. We'll see. Somewhat related to this all: what we _do_ want to do some day is to check the PAGE_USER bit - it should obviously always be set for user pages, but it would be a good check to have back. Because we have no generic way to test for it, we lost it as part of moving over from the architecture-specific x86 GUP implementation to the generic one in commit e585513b ("x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"). Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Clamp timeouts to INT_MAX in conntrack, from Jay Elliot. 2) Fix broken UAPI for BPF_PROG_TYPE_PERF_EVENT, from Hendrik Brueckner. 3) Fix locking in ieee80211_sta_tear_down_BA_sessions, from Johannes Berg. 4) Add missing barriers to ptr_ring, from Michael S. Tsirkin. 5) Don't advertise gigabit in sh_eth when not available, from Thomas Petazzoni. 6) Check network namespace when delivering to netlink taps, from Kevin Cernekee. 7) Kill a race in raw_sendmsg(), from Mohamed Ghannam. 8) Use correct address in TCP md5 lookups when replying to an incoming segment, from Christoph Paasch. 9) Add schedule points to BPF map alloc/free, from Eric Dumazet. 10) Don't allow silly mtu values to be used in ipv4/ipv6 multicast, also from Eric Dumazet. 11) Fix SKB leak in tipc, from Jon Maloy. 12) Disable MAC learning on OVS ports of mlxsw, from Yuval Mintz. 13) SKB leak fix in skB_complete_tx_timestamp(), from Willem de Bruijn. 14) Add some new qmi_wwan device IDs, from Daniele Palmas. 15) Fix static key imbalance in ingress qdisc, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: qcom/emac: Reduce timeout for mdio read/write net: sched: fix static key imbalance in case of ingress/clsact_init error net: sched: fix clsact init error path ip_gre: fix wrong return value of erspan_rcv net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support pkt_sched: Remove TC_RED_OFFLOADED from uapi net: sched: Move to new offload indication in RED net: sched: Add TCA_HW_OFFLOAD net: aquantia: Increment driver version net: aquantia: Fix typo in ethtool statistics names net: aquantia: Update hw counters on hw init net: aquantia: Improve link state and statistics check interval callback net: aquantia: Fill in multicast counter in ndev stats from hardware net: aquantia: Fill ndev stat couters from hardware net: aquantia: Extend stat counters to 64bit values net: aquantia: Fix hardware DMA stream overload on large MRRS net: aquantia: Fix actual speed capabilities reporting sock: free skb in skb_complete_tx_timestamp on error s390/qeth: update takeover IPs after configuration change s390/qeth: lock IP table while applying takeover changes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes for 4.15-rc4. There is the usual handful gadget/dwc2/dwc3 fixes as always, for reported issues. But the most important things in here is the core fix from Alan Stern to resolve a nasty security bug (my first attempt is reverted, Alan's was much cleaner), as well as a number of usbip fixes from Shuah Khan to resolve those reported security issues. All of these have been in linux-next with no reported issues" * tag 'usb-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: core: prevent malicious bNumInterfaces overflow Revert "USB: core: only clean up what we allocated" USB: core: only clean up what we allocated Revert "usb: gadget: allow to enable legacy drivers without USB_ETH" usb: gadget: webcam: fix V4L2 Kconfig dependency usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult less than 3 usb: dwc3: of-simple: set dev_pm_ops usb: dwc3: of-simple: fix missing clk_disable_unprepare usb: dwc3: gadget: Wait longer for controller to end command processing usb: xhci: fix TDS for MTK xHCI1.1 xhci: Don't add a virt_dev to the devs array before it's fully allocated usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer usbip: prevent vhci_hcd driver from leaking a socket pointer address usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input usbip: fix stub_rx: get_pipe() to validate endpoint number tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent gcc with -Werror) USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID usb: musb: da8xx: fix babble condition handling
-