Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 15 6月, 2017 1 次提交
    • Y
      bpf: permits narrower load from bpf program context fields · 31fd8581
      由 Yonghong Song 提交于 
      Currently, verifier will reject a program if it contains an
narrower load from the bpf context structure. For example,
        __u8 h = __sk_buff->hash, or
        __u16 p = __sk_buff->protocol
        __u32 sample_period = bpf_perf_event_data->sample_period
which are narrower loads of 4-byte or 8-byte field.

This patch solves the issue by:
  . Introduce a new parameter ctx_field_size to carry the
    field size of narrower load from prog type
    specific *__is_valid_access validator back to verifier.
  . The non-zero ctx_field_size for a memory access indicates
    (1). underlying prog type specific convert_ctx_accesses
         supporting non-whole-field access
    (2). the current insn is a narrower or whole field access.
  . In verifier, for such loads where load memory size is
    less than ctx_field_size, verifier transforms it
    to a full field load followed by proper masking.
  . Currently, __sk_buff and bpf_perf_event_data->sample_period
    are supporting narrowing loads.
  . Narrower stores are still not allowed as typical ctx stores
    are just normal stores.

Because of this change, some tests in verifier will fail and
these tests are removed. As a bonus, rename some out of bound
__sk_buff->cb access to proper field name and remove two
redundant "skb cb oob" tests.
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      31fd8581
  3. 14 6月, 2017 1 次提交
  5. 11 6月, 2017 3 次提交
  7. 10 6月, 2017 2 次提交
  9. 07 6月, 2017 1 次提交
  11. 05 6月, 2017 1 次提交
  13. 03 6月, 2017 2 次提交
  15. 27 5月, 2017 1 次提交
  17. 26 5月, 2017 1 次提交
  19. 24 5月, 2017 8 次提交
    • I
      tools/include: Sync kernel ABI headers with tooling headers · 6e30437b
      由 Ingo Molnar 提交于 
      Sync (copy) the following v4.12 kernel headers to the tooling headers:

  arch/x86/include/asm/disabled-features.h:
  arch/x86/include/uapi/asm/kvm.h:
  arch/powerpc/include/uapi/asm/kvm.h:
  arch/s390/include/uapi/asm/kvm.h:
  arch/arm/include/uapi/asm/kvm.h:
  arch/arm64/include/uapi/asm/kvm.h:

   - 'struct kvm_sync_regs' got changed in an ABI-incompatible way,
     fortunately none of the (in-kernel) tooling relied on it

   - new KVM_DEV calls added

  arch/x86/include/asm/required-features.h:

   - 5-level paging hardware ABI detail added

  arch/x86/include/asm/cpufeatures.h:

   - new CPU feature added

  arch/x86/include/uapi/asm/vmx.h:

   - new VMX exit conditions

None of the changes requires fixes in the tooling source code.

This addresses the following warnings:

  Warning: include/uapi/linux/stat.h differs from kernel
  Warning: arch/x86/include/asm/disabled-features.h differs from kernel
  Warning: arch/x86/include/asm/required-features.h differs from kernel
  Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
  Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel
  Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
  Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
  Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
  Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
  Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel

Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6e30437b
    • N
      perf tools: Put caller above callee in --children mode · 7111ffff
      由 Namhyung Kim 提交于 
      The __hpp__sort_acc() sorts entries using callchain depth in order to
put callers above in children mode.  But it assumed the callchain order
was callee-first.  Now default (for children) is caller-first so the
order of entries is reverted.

For example, consider following case:

  $ perf report --no-children
  ..l
  # Overhead  Command  Shared Object        Symbol
  # ........  .......  ...................  ..........................
  #
      99.44%  a.out    a.out                [.] main
              |
              ---main
                 __libc_start_main
                 _start

Then children mode should show 'start' above '__libc_start_main' since
it's the caller (parent) of the __libc_start_main.  But it's reversed:

  # Children      Self  Command  Shared Object    Symbol
  # ........  ........  .......  ...............  .....................
  #
      99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
      99.61%     0.00%  a.out    a.out            [.] _start
      99.54%    99.44%  a.out    a.out            [.] main

This patch fixes it.

  # Children      Self  Command  Shared Object    Symbol
  # ........  ........  .......  ...............  .....................
  #
      99.61%     0.00%  a.out    a.out            [.] _start
      99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
      99.54%    99.44%  a.out    a.out            [.] main
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-8-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7111ffff
    • M
      perf report: Do not drop last inlined frame · 4d53b9d5
      由 Milian Wolff 提交于 
      The very last inlined frame, i.e. the one furthest away from the
non-inlined frame, was silently dropped. This is apparent when
comparing the output of `perf script` and `addr2line`:

~~~~~~
  $ perf script --inline
  ...
  a.out 26722 80836.309329:      72425 cycles:
                     21561 __hypot_finite (/usr/lib/libm-2.25.so)
                      ace3 hypot (/usr/lib/libm-2.25.so)
                       a4a main (a.out)
                           std::abs<double>
                           std::_Norm_helper<true>::_S_do_it<double>
                           std::norm<double>
                           main
                     20510 __libc_start_main (/usr/lib/libc-2.25.so)
                       bd9 _start (a.out)

  $ addr2line -a -f -i -e /tmp/a.out a4a | c++filt
  0x0000000000000a4a
  std::__complex_abs(doublecomplex )
  /usr/include/c++/6.3.1/complex:589
  double std::abs<double>(std::complex<double> const&)
  /usr/include/c++/6.3.1/complex:597
  double std::_Norm_helper<true>::_S_do_it<double>(std::complex<double> const&)
  /usr/include/c++/6.3.1/complex:654
  double std::norm<double>(std::complex<double> const&)
  /usr/include/c++/6.3.1/complex:664
  main
  /tmp/inlining.cpp:14
~~~~~

Note how `std::__complex_abs` is missing from the `perf script`
output. This is similarly showing up in `perf report`. The patch
here fixes this issue, and the output becomes:

~~~~~
  a.out 26722 80836.309329:      72425 cycles:
                     21561 __hypot_finite (/usr/lib/libm-2.25.so)
                      ace3 hypot (/usr/lib/libm-2.25.so)
                       a4a main (a.out)
                           std::__complex_abs
                           std::abs<double>
                           std::_Norm_helper<true>::_S_do_it<double>
                           std::norm<double>
                           main
                     20510 __libc_start_main (/usr/lib/libc-2.25.so)
                       bd9 _start (a.out)
~~~~~
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-7-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      4d53b9d5
    • M
      perf report: Always honor callchain order for inlined nodes · 28071f51
      由 Milian Wolff 提交于 
      So far, the inlined nodes where only reversed when we built perf
against libbfd. If that was not available, the addr2line fallback
code path was missing the inline_list__reverse call.

Now we always add the nodes in the correct order within
inline_list__append. This removes the need to reverse the list
and also ensures that all callers construct the list in the right
order.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-6-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      28071f51
    • N
      perf script: Add --inline option for debugging · 325fbff5
      由 Namhyung Kim 提交于 
      The --inline option is to show inlined functions in callchains.

For example:

  $ perf script
  a.out  5644 11611.467597:     309961 cycles:u:
                     790 main (/home/namhyung/tmp/perf/a.out)
                   20511 __libc_start_main (/usr/lib/libc-2.25.so)
                     8ba _start (/home/namhyung/tmp/perf/a.out)
  ...

  $ perf script --inline
  a.out  5644 11611.467597:     309961 cycles:u:
                     790 main (/home/namhyung/tmp/perf/a.out)
                         std::__detail::_Adaptor<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul>, double>::operator()
                         std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
                         std::uniform_real_distribution<double>::operator()<std::linear_congruential_engine<unsigned long, 16807ul, 0ul, 2147483647ul> >
                         main
                   20511 __libc_start_main (/usr/lib/libc-2.25.so)
                     8ba _start (/home/namhyung/tmp/perf/a.out)
  ...
Reviewed-and-tested-by: NMilian Wolff <milian.wolff@kdab.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-5-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      325fbff5
    • M
      perf report: Fix off-by-one for non-activation frames · 1982ad48
      由 Milian Wolff 提交于 
      As the documentation for dwfl_frame_pc says, frames that
are no activation frames need to have their program counter
decremented by one to properly find the function of the caller.

This fixes many cases where perf report currently attributes
the cost to the next line. I.e. I have code like this:

~~~~~~~~~~~~~~~
  #include <thread>
  #include <chrono>

  using namespace std;

  int main()
  {
    this_thread::sleep_for(chrono::milliseconds(1000));
    this_thread::sleep_for(chrono::milliseconds(100));
    this_thread::sleep_for(chrono::milliseconds(10));

    return 0;
  }
~~~~~~~~~~~~~~~

Now compile and record it:

~~~~~~~~~~~~~~~
  g++ -std=c++11 -g -O2 test.cpp
  echo 1 | sudo tee /proc/sys/kernel/sched_schedstats
  perf record \
    --event sched:sched_stat_sleep \
    --event sched:sched_process_exit \
    --event sched:sched_switch --call-graph=dwarf \
    --output perf.data.raw \
    ./a.out
  echo 0 | sudo tee /proc/sys/kernel/sched_schedstats
  perf inject --sched-stat --input perf.data.raw --output perf.data
~~~~~~~~~~~~~~~

Before this patch, the report clearly shows the off-by-one issue.
Most notably, the last sleep invocation is incorrectly attributed
to the "return 0;" line:

~~~~~~~~~~~~~~~
  Overhead  Source:Line
  ........  ...........

   100.00%  core.c:0
            |
            ---__schedule core.c:0
               schedule
               do_nanosleep hrtimer.c:0
               hrtimer_nanosleep
               sys_nanosleep
               entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
               __nanosleep_nocancel .:0
               std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
               |
               |--90.08%--main test.cpp:9
               |          __libc_start_main
               |          _start
               |
               |--9.01%--main test.cpp:10
               |          __libc_start_main
               |          _start
               |
                --0.91%--main test.cpp:13
                          __libc_start_main
                          _start
~~~~~~~~~~~~~~~

With this patch here applied, the issue is fixed. The report becomes
much more usable:

~~~~~~~~~~~~~~~
  Overhead  Source:Line
  ........  ...........

   100.00%  core.c:0
            |
            ---__schedule core.c:0
               schedule
               do_nanosleep hrtimer.c:0
               hrtimer_nanosleep
               sys_nanosleep
               entry_SYSCALL_64_fastpath .tmp_entry_64.o:0
               __nanosleep_nocancel .:0
               std::this_thread::sleep_for<long, std::ratio<1l, 1000l> > thread:323
               |
               |--90.08%--main test.cpp:8
               |          __libc_start_main
               |          _start
               |
               |--9.01%--main test.cpp:9
               |          __libc_start_main
               |          _start
               |
                --0.91%--main test.cpp:10
                          __libc_start_main
                          _start
~~~~~~~~~~~~~~~

Similarly it works for signal frames:

~~~~~~~~~~~~~~~
  __noinline void bar(void)
  {
    volatile long cnt = 0;

    for (cnt = 0; cnt < 100000000; cnt++);
  }

  __noinline void foo(void)
  {
    bar();
  }

  void sig_handler(int sig)
  {
    foo();
  }

  int main(void)
  {
    signal(SIGUSR1, sig_handler);
    raise(SIGUSR1);

    foo();
    return 0;
  }
~~~~~~~~~~~~~~~~

Before, the report wrongly points to `signal.c:29` after raise():

~~~~~~~~~~~~~~~~
  $ perf report --stdio --no-children -g srcline -s srcline
  ...
   100.00%  signal.c:11
            |
            ---bar signal.c:11
               |
               |--50.49%--main signal.c:29
               |          __libc_start_main
               |          _start
               |
                --49.51%--0x33a8f
                          raise .:0
                          main signal.c:29
                          __libc_start_main
                          _start
~~~~~~~~~~~~~~~~

With this patch in, the issue is fixed and we instead get:

~~~~~~~~~~~~~~~~
   100.00%  signal   signal            [.] bar
            |
            ---bar signal.c:11
               |
               |--50.49%--main signal.c:29
               |          __libc_start_main
               |          _start
               |
                --49.51%--0x33a8f
                          raise .:0
                          main signal.c:27
                          __libc_start_main
                          _start
~~~~~~~~~~~~~~~~

Note how this patch fixes this issue for both unwinding methods, i.e.
both dwfl and libunwind. The former case is straight-forward thanks
to dwfl_frame_pc(). For libunwind, we replace the functionality via
unw_is_signal_frame() for any but the very first frame.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-4-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      1982ad48
    • M
      perf report: Fix memory leak in addr2line when called by addr2inlines · b21cc978
      由 Milian Wolff 提交于 
      When a filename was found in addr2line it was duplicated via strdup()
but never freed. Now we pass NULL and handle this gracefully in
addr2line.

Detected by Valgrind:

  ==16331== 1,680 bytes in 21 blocks are definitely lost in loss record 148 of 220
  ==16331==    at 0x4C2AF1F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
  ==16331==    by 0x672FA69: strdup (in /usr/lib/libc-2.25.so)
  ==16331==    by 0x52769F: addr2line (srcline.c:256)
  ==16331==    by 0x52769F: addr2inlines (srcline.c:294)
  ==16331==    by 0x52769F: dso__parse_addr_inlines (srcline.c:502)
  ==16331==    by 0x574D7A: inline__fprintf (hist.c:41)
  ==16331==    by 0x574D7A: ipchain__fprintf_graph (hist.c:147)
  ==16331==    by 0x57518A: __callchain__fprintf_graph (hist.c:212)
  ==16331==    by 0x5753CF: callchain__fprintf_graph.constprop.6 (hist.c:337)
  ==16331==    by 0x57738E: hist_entry__fprintf (hist.c:628)
  ==16331==    by 0x57738E: hists__fprintf (hist.c:882)
  ==16331==    by 0x44A20F: perf_evlist__tty_browse_hists (builtin-report.c:399)
  ==16331==    by 0x44A20F: report__browse_hists (builtin-report.c:491)
  ==16331==    by 0x44A20F: __cmd_report (builtin-report.c:624)
  ==16331==    by 0x44A20F: cmd_report (builtin-report.c:1054)
  ==16331==    by 0x4A49CE: run_builtin (perf.c:296)
  ==16331==    by 0x4A4CC0: handle_internal_command (perf.c:348)
  ==16331==    by 0x434371: run_argv (perf.c:392)
  ==16331==    by 0x434371: main (perf.c:530)
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-3-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      b21cc978
    • M
      perf report: Don't crash on invalid maps in `-g srcline` mode · 7d4df089
      由 Milian Wolff 提交于 
      I just hit a segfault when doing `perf report -g srcline`.
Valgrind pointed me at this code as the culprit:

  ==8359== Invalid read of size 8
  ==8359==    at 0x3096D9: map__rip_2objdump (map.c:430)
  ==8359==    by 0x2FC1A3: match_chain_srcline (callchain.c:645)
  ==8359==    by 0x2FC1A3: match_chain (callchain.c:700)
  ==8359==    by 0x2FC1A3: append_chain (callchain.c:895)
  ==8359==    by 0x2FC1A3: append_chain_children (callchain.c:846)
  ==8359==    by 0x2FF719: callchain_append (callchain.c:944)
  ==8359==    by 0x2FF719: hist_entry__append_callchain (callchain.c:1058)
  ==8359==    by 0x32FA06: iter_add_single_cumulative_entry (hist.c:908)
  ==8359==    by 0x33195C: hist_entry_iter__add (hist.c:1050)
  ==8359==    by 0x258F65: process_sample_event (builtin-report.c:204)
  ==8359==    by 0x30D60C: perf_session__deliver_event (session.c:1310)
  ==8359==    by 0x30D60C: ordered_events__deliver_event (session.c:119)
  ==8359==    by 0x310D12: __ordered_events__flush (ordered-events.c:210)
  ==8359==    by 0x310D12: ordered_events__flush.part.3 (ordered-events.c:277)
  ==8359==    by 0x30DD3C: perf_session__process_user_event (session.c:1349)
  ==8359==    by 0x30DD3C: perf_session__process_event (session.c:1475)
  ==8359==    by 0x30FC3C: __perf_session__process_events (session.c:1867)
  ==8359==    by 0x30FC3C: perf_session__process_events (session.c:1921)
  ==8359==    by 0x25A985: __cmd_report (builtin-report.c:575)
  ==8359==    by 0x25A985: cmd_report (builtin-report.c:1054)
  ==8359==    by 0x2B9A80: run_builtin (perf.c:296)
  ==8359==  Address 0x70 is not stack'd, malloc'd or (recently) free'd

This patch fixes the issue.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
[ Remove dependency from another change ]
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-2-namhyung@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7d4df089
  21. 19 5月, 2017 1 次提交
    • M
      selftests/powerpc: Fix TM resched DSCR test with some compilers · fe06fe86
      由 Michael Ellerman 提交于 
      The tm-resched-dscr test has started failing sometimes, depending on
what compiler it's built with, eg:

  test: tm_resched_dscr
  Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed.
  !! child died by signal 6

When it fails we see that the compiler doesn't initialise rv to 1 before
entering the inline asm block. Although that's counter intuitive, it
is allowed because we tell the compiler that the inline asm will write
to rv (using "=r"), meaning the original value is irrelevant.

Marking it as a read/write parameter would presumably work, but it seems
simpler to fix it by setting the initial value of rv in the inline asm.

Fixes: 96d01610 ("powerpc: Correct DSCR during TM context switch")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NMichael Neuling <mikey@neuling.org>
      fe06fe86
  23. 18 5月, 2017 3 次提交
  25. 16 5月, 2017 2 次提交
  27. 13 5月, 2017 1 次提交
  29. 12 5月, 2017 6 次提交
  31. 09 5月, 2017 4 次提交
  33. 04 5月, 2017 2 次提交
    • A
      tools build: Fixup sched_getcpu feature test · 1e6e7eae
      由 Arnaldo Carvalho de Melo 提交于 
      We have tools/build/feature/test-all.c to speed up feature testing,
doing all tests at once, but then all tests in this file should normally
pass.

That is not the case with the sched-getcpu one, that wasn't passing when
included from test-all.c because it needs to have _GNU_SOURCE defined
before including sched.h, but _GNU_SOURCE is defined by a header
included from another feature test included earlier in test-all.d,
test-libpython.c, resulting in:

  $ cat /tmp/build/perf/feature/test-all.make.output
  In file included from test-all.c:121:0:
  test-sched_getcpu.c:1:0: error: "_GNU_SOURCE" redefined [-Werror]
   #define _GNU_SOURCE

  In file included from /usr/include/python2.7/pyconfig.h:6:0,
                   from /usr/include/python2.7/Python.h:8,
                   from test-libpython.c:1,
                   from test-all.c:13:
  /usr/include/python2.7/pyconfig-64.h:1177:0: note: this is the location of the previous definition
   #define _GNU_SOURCE 1

  cc1: all warnings being treated as errors

Which would trigger testing the tests individually, when that
_GNU_SOURCE redefinition would not take place, and the whole process
would continue, just slower... Fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 120010cb ("tools build: Add test for sched_getcpu()")
Link: http://lkml.kernel.org/n/tip-3qp1it69xsc4w8gnuu1e9ayh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1e6e7eae
    • K
      perf tests kmod-path: Don't fail if compressed modules aren't supported · 805b151a
      由 Kim Phillips 提交于 
      __kmod_path__parse() uses is_supported_compression() to determine and
parse out compressed module file extensions.  On systems without zlib,
this test fails and __kmod_path__parse() continues to strcmp "ko" with
"gz".  Don't do this on those systems.
Signed-off-by: NKim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 3c8a67f5 ("perf tools: Add kmod_path__parse function")
Link: http://lkml.kernel.org/r/20170503131402.c66e314460026c80cd787b34@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      805b151a