According to bspec, result_lines > 31 is only a maximum for latency
level 1 through 7.

For level 0 the number of lines is ignored, so always write 0 there
to prevent overflowing the 5 bits value.

This is required to make NV12 work.

Changes since v1:
- Rebase on top of GEN11 wm changes. It seems to use res_lines for
  level 0 limit calculations, but still doesn't appear to program it.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20180205105841.31634-1-maarten.lankhorst@linux.intel.com

When a request is preempted, it is unsubmitted from the HW queue and
removed from the active list of breadcrumbs. In the process, this
however triggers the signaler and it may see the clear rbtree with the
old, and still valid, seqno, or it may match the cleared seqno with the
now zero rq->global_seqno. This confuses the signaler into action and
signaling the fence.

Fixes: d6a2289d ("drm/i915: Remove the preempted request from the execution queue")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206094633.30181-1-chris@chris-wilson.co.uk

Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Commit 99e48bf9 ("drm/i915: Lock out execlist tasklet while peeking
inside for busy-stats") added a tasklet_disable call in busy stats
enabling, but we failed to understand that the PMU enable callback runs
as an hard IRQ (IPI).

Consequence of this is that the PMU enable callback can interrupt the
execlists tasklet, and will then deadlock when it calls
intel_engine_stats_enable->tasklet_disable.

To fix this, I realized it is possible to move the engine stats enablement
and disablement to PMU event init and destroy hooks. This allows for much
simpler implementation since those hooks run in normal context (can
sleep).

v2: Extract engine_event_destroy. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 99e48bf9 ("drm/i915: Lock out execlist tasklet while peeking inside for busy-stats")
Testcase: igt/perf_pmu/enable-race-*
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205093448.13877-1-tvrtko.ursulin@linux.intel.com

This workaround should prevent a bug that can be hit on a context
restore. To avoid the issue, we must emit a PIPE_CONTROL with CS stall
(0x7a000004 0x00100000 0x00000000 0x00000000) followed by 12DW's of
NOOP(0x0) in the indirect context batch buffer, to ensure the engine is
idle prior to programming 3DSTATE_SAMPLE_PATTERN.

It's also not clear whether we should add those extra dwords because of
the workaround itself, or if that's just padding for the WA BB (and next
commands could come right after the PIPE_CONTROL). We keep them for now.

References: HSD#1939868

 v2: More descriptive changelog and comments.
 v3: Explain that PIPE_CONTROL is actually 6 dwords, and that we advance
     10 more dwords because of that.
Signed-off-by: NRafael Antognolli <rafael.antognolli@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205233330.14973-1-rafael.antognolli@intel.com

The command MEDIA_VFE_STATE checks bits at offset +2 dwords. However, it is
possible to have MEDIA_VFE_STATE command with length = 0 + LENGTH_BIAS = 2.
In that case check_cmd will read bits from the following command, or even past
the end of the buffer.

If the offset ends up outside of the command length, reject the command.

Fixes: 351e3db2 ("drm/i915: Implement command buffer parsing logic")
Signed-off-by: NMichal Srb <msrb@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205151745.29292-1-msrb@suse.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-2-chris@chris-wilson.co.uk

The find_reg function was assuming that there is always at least one table in
reg_tables. It is not always true.

In case of VCS or VECS, the reg_tables is NULL and reg_table_count is 0,
implying that no register-accessing commands are allowed. However, the command
tables include commands such as MI_STORE_REGISTER_MEM. When trying to check
such command, the find_reg would dereference NULL pointer.

Now it will just return NULL meaning that the register was not found and the
command will be rejected.

Fixes: 76ff480e ("drm/i915/cmdparser: Use binary search for faster register lookup")
Signed-off-by: NMichal Srb <msrb@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205142916.27092-2-msrb@suse.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-1-chris@chris-wilson.co.uk
register lookup")

Deprecate the silly I915_SET_COLORKEY_NONE flag. The obvious
way to disable colorkey is to just set flags to 0, which is
exactly what the intel ddx has been doing all along.

Currently when userspace sets the flags to 0, we end up in a
funny state where colorkey is disabled, but various colorkey
vs. scaling checks still consider colorkey to be enabled, and
thus we don't allow plane scaling to kick in.

In case there is some other userspace out there that actually
uses this flag (unlikely as this is an i915 specific uapi)
we'll keep on accepting it.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202204231.27905-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Since commit 7b6da818 ("drm/i915: Restore the kernel context after a
GPU reset on an idle engine") we submit a request following the engine
reset. The intent is that we don't submit a request if the engine is
busy (as it will restart active by itself) but we only checked to see if
there were remaining requests in flight on the hardware and skipped
checking to see if there were any ready requests that would be
immediately submitted on restart (the same time as our new request would
be). Having convinced the engine to appear idle in the previous patch,
we can use intel_engine_is_idle() as a better test to only submit a new
request if there are no pending requests.

As it happens, this is tripping up igt/drv_selftest/live_hangcheck in CI
as we overfill the kernel_context ringbuffer trigger an infinite
recursion from within the reset.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104786
References: 7b6da818 ("drm/i915: Restore the kernel context after a GPU reset on an idle engine")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-4-chris@chris-wilson.co.uk

In preparation for the next patch, we want the engine to appear idle
after a reset (if there are no requests in flight). For execlists, this
entails clearing the active status on reset, it will be regenerated on
restarting the engine after the reset. In the process, note that a
couple of other status flags and checks could be moved into the
describing function.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-3-chris@chris-wilson.co.uk

Avoid injecting hangs in to the i915->kernel_context in case the GPU
reset leaves corruption in the context image in its wake (leading to
continual failures and system hangs after the selftests are ostensibly
complete). Use a sacrificial kernel_context instead.

v2: Closing a context is tricky; export a function (for selftests) from
i915_gem_context.c to get it right.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-2-chris@chris-wilson.co.uk

When injecting rapid resets, we must be careful to at least wait for the
previous reset to have taken effect and the engine restarted. If we
perform a second reset before that has happened, we will notice that the
engine hasn't recovered and declare it lost, wedging the device and
failing. In practice, since we wait for each hanging batch to start
before injecting the reset, this too-fast-reset condition can only be
triggered when moving onto the next engine in the test, so we need only
wait for the existing reset to complete before switching engines.

v2: Wrap up the wait inside a safety net to bail out in case of angry hw.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205152431.12163-1-chris@chris-wilson.co.uk

If we remember to cancel the signaler on a request when retiring it
(after we know that the request has been signaled), we do not need to
carry an additional request in the signaler itself. This prevents an
issue whereby the signaler threads may be delayed and hold on to
thousands of request references, causing severe memory fragmentation and
premature oom (most noticeable on 32b snb due to the limited GFP_KERNEL
and frequent use of inter-engine fences).

v2: Rename first_signal(), document reads outside of locks.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203101914.24880-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

During testing, we trigger a lot of resets on an unbannable context
leading to massive amounts of irrelevant debug spam. Remove the
ban_score accounting and message for the unbannable context so that we
improve the signal:noise in the log messages for when the unexpected
occurs.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-7-chris@chris-wilson.co.uk

Execlists is now enabled by default and included in the list of
capabilities printed out to dmesg and beyond. We do not need to mention
it again, every time we restart the engine, so kill the spam.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-6-chris@chris-wilson.co.uk

Dump each engine state when i915_gem_set_wedged() is called to give us
some more clues as to why we had to terminate the GPU.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205092201.19476-5-chris@chris-wilson.co.uk

Provide the reason why we call intel_fbc_deactivate() so that debugging
issues with FBC being delayed is clearer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125224122.27480-1-chris@chris-wilson.co.ukReviewed-by: NJani Nikula <jani.nikula@intel.com>

The headers should be on a separate line for consistency, so add the
missing trailing newline in a few intel_engine_dump() callers.
Reported-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205100618.11001-1-chris@chris-wilson.co.uk

Since unbannable contexts are special and supposed not to be causing GPU
hangs in the first place, make it clear when they are implicated in said
hang. In practice, most unbannable contexts are those created by igt
for the express purpose of throwing untold thousands of hangs at the GPU
and wish to keep doing so to finish the test. Normally they are cleaned
up, but it's when they or the other unbannable kernel contexts stay
stuck in an erroneous state that we need to worry and so need
highlighting.
Suggested-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205094139.10671-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>

As we ourselves cancel interrupts during reset by clearing the GTIIR, it
is possible for the master IIR to indicate a pending IRQ for which we
have already cleared from the GTIIR. In this case, the DRM_ERROR are
intended and should not be flagged as an error.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202153448.23908-1-chris@chris-wilson.co.uk

Be paranoid and flush the GTIIR after clearing the CS interrupt to be
sure it has taken before we re-enable the interrupt handler. We still
see early interrupts following reset, the tasklet handling the mmio read
before it has been written by the CS. This hopefully reduces the
frequency to 0...

References: https://bugs.freedesktop.org/show_bug.cgi?id=104262Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202145455.29876-1-chris@chris-wilson.co.uk

Save some horizontal space.
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180202130416.18233-1-jani.nikula@intel.com

We're using i915_inject_load_failure() to inject dummy
faults during driver load, but since this is debug utility
we shouldn't expose it in default config as it consumes
both code and data.

add/remove: 0/1 grow/shrink: 0/2 up/down: 0/-302 (-302)
Function                                     old     new   delta
__i915_inject_load_failure                    61       -     -61
i915_gem_init                               1331    1268     -63
i915_driver_load                            5923    5745    -178
Total: Before=1177454, After=1177152, chg -0.03%

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-4 (-4)
Data                                         old     new   delta
i915_load_fail_count                           4       -      -4
Total: Before=56762, After=56758, chg -0.01%

add/remove: 4/8 grow/shrink: 0/1 up/down: 245/-591 (-346)
RO Data                                      old     new   delta
__param_str_inject_load_failure               20       -     -20
__UNIQUE_ID_inject_load_failuretype200        34       -     -34
__param_inject_load_failure                   40       -     -40
__func__                                    4998    4896    -102
__UNIQUE_ID_inject_load_failure201           150       -    -150
Total: Before=119095, After=118749, chg -0.29%
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180201173248.3912-1-michal.wajdeczko@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We have the max DP link rate info available in VBT since BDB version
216, included in child device config since commit c4fb60b9
("drm/i915/bios: add DP max link rate to VBT child device
struct"). Parse it and use it.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8b1364d1f2394fba3062b6ad11b474744ea4366.1517482774.git.jani.nikula@intel.com

Make the limiting rate based instead of messing with the array size.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cb03b9419191a7d6359bf371aacb2d3725c746de.1517482774.git.jani.nikula@intel.com

This will be useful later on. Also move the functions around to not need
forward declarations in subsequent patches. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/40f37f08cad33234cd86337d39e823ac6e55805f.1517482774.git.jani.nikula@intel.com

There is no requirement for doing the PCODE request polling atomically,
so do that only for a short time switching to sleeping poll afterwards.
The specification requires a 150usec timeout for the change notification,
so let's use that for the atomic poll. Do the extra 2ms poll - needed as
a workaround on BXT/GLK - in sleeping mode.

v2:
- rebase on v2 of patchset dropping the sandybridge_pcode_read/write
  refactoring (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-2-imre.deak@intel.com

Currently we see sporadic timeouts during CDCLK changing both on BXT and
GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by
changing the frequency in a tight loop after blanking the display. The
upper bound for the completion time is 800us based on my tests, so
increase it from the current 500us to 2ms; with that I couldn't trigger
the problem either on BXT or GLK.

Note that timeouts happened during both the change notification and the
voltage level setting PCODE request. (For the latter one BSpec doesn't
require us to wait for completion before further HW programming.)

This issue is similar to
commit 2c7d0602 ("drm/i915/gen9: Fix PCODE polling during CDCLK
change notification")
but there the PCODE request does complete (as shown by the mbox
busy flag), only the reply we get from PCODE indicates a failure.
So there we keep resending the request until a success reply, here we
just have to increase the timeout for the one PCODE request we send.

v2:
- s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com

In case of GuC initialization failure we may continue with driver
load, but we wrongly assume that GuC is fully functional. This
leads to the BUG as we attempt to access non-existing log vma.

[26386.121085] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
[26386.121225] IP: guc_log_runtime_create+0x23/0xe0 [i915]
[26386.121763] Call Trace:
[26386.121870]  guc_log_late_setup+0xfd/0x140 [i915]
[26386.121969]  i915_driver_load+0x7ab/0x1730 [i915]
[26386.122069]  i915_pci_probe+0x2d/0x90 [i915]
[26386.122089]  pci_device_probe+0x9c/0x120
[26386.122107]  driver_probe_device+0x2a9/0x490
[26386.122126]  __driver_attach+0xd9/0xe0
[26386.122143]  ? driver_probe_device+0x490/0x490
[26386.122158]  bus_for_each_dev+0x57/0x90
[26386.122175]  bus_add_driver+0x1eb/0x260
[26386.122190]  ? 0xffffffffa069a000
[26386.122206]  driver_register+0x52/0xc0
[26386.122220]  ? 0xffffffffa069a000
[26386.122234]  do_one_initcall+0x39/0x170
[26386.122252]  ? kmem_cache_alloc_trace+0x1fd/0x2e0
[26386.122273]  do_init_module+0x56/0x1ec
[26386.122289]  load_module+0x219e/0x2550
[26386.122309]  ? vfs_read+0x121/0x140
[26386.122331]  ? SyS_finit_module+0xa5/0xe0
[26386.122346]  SyS_finit_module+0xa5/0xe0
[26386.122371]  entry_SYSCALL_64_fastpath+0x22/0x8f
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131173241.19704-4-michal.wajdeczko@intel.comReviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We're freeing GuC error log in uc_fini_hw() that matches
corresponding uc_init_hw() but we missed the point that this
log object is copied on error path and in case of failure in
uc_init_hw() we will leak this object as uc_fini_hw() is
never called.

If we free this log object as part of the late uC cleanup, where
we also release other firmware objects, we can avoid this BUG:

[70841.001413] BUG drm_i915_gem_object (Tainted: G     U  W       ): Objects remaining in drm_i915_gem_object on __kmem_cache_shutdown()
[70841.001436] INFO: Slab 0x00000000c94e41af objects=21 used=1 fp=0x000000001d60c40a flags=0x8000000000008100

[70841.001466] Call Trace:
[70841.001471]  dump_stack+0x5e/0x8e
[70841.001476]  slab_err+0x99/0xb0
[70841.001483]  ? __slab_alloc.isra.24.constprop.29+0x62/0x70
[70841.001491]  ? __kmalloc+0x1f5/0x320
[70841.001497]  __kmem_cache_shutdown+0x18b/0x400
[70841.001505]  shutdown_cache+0x13/0x1c0
[70841.001511]  kmem_cache_destroy+0x1c2/0x240
[70841.001517]  ? __mutex_unlock_slowpath+0x38/0x270
[70841.001559]  i915_gem_load_cleanup+0xbc/0x130 [i915]
[70841.001595]  i915_driver_cleanup_early+0x11/0x60 [i915]
[70841.001630]  i915_driver_load+0x708/0x1720 [i915]
[70841.001638]  ? trace_hardirqs_on_caller+0xe2/0x1c0
[70841.001673]  i915_pci_probe+0x2d/0x90 [i915]
[70841.001680]  pci_device_probe+0x9c/0x120
[70841.001687]  driver_probe_device+0x2a9/0x490
[70841.001694]  __driver_attach+0xd9/0xe0
[70841.001700]  ? driver_probe_device+0x490/0x490
[70841.001705]  bus_for_each_dev+0x57/0x90
[70841.001712]  bus_add_driver+0x1eb/0x260
[70841.001717]  ? 0xffffffffa0685000
[70841.001723]  driver_register+0x52/0xc0
[70841.001728]  ? 0xffffffffa0685000
[70841.001733]  do_one_initcall+0x39/0x170
[70841.001739]  ? rcu_read_lock_sched_held+0x6f/0x80
[70841.001746]  ? kmem_cache_alloc_trace+0x27b/0x2e0
[70841.001753]  do_init_module+0x56/0x1ec
[70841.001759]  load_module+0x219e/0x2550
[70841.001766]  ? vfs_read+0x121/0x140
[70841.001774]  ? SyS_finit_module+0xa5/0xe0
[70841.001779]  SyS_finit_module+0xa5/0xe0
[70841.001788]  entry_SYSCALL_64_fastpath+0x22/0x8f

[70841.001806] INFO: Object 0x00000000eab7ed96 @offset=6208
[70841.001850] INFO: Allocated in i915_gem_object_create.part.32+0x1f/0x260 [i915] age=38 cpu=0 pid=2708
[70841.001861] 	kmem_cache_alloc+0x23d/0x2d0
[70841.001897] 	i915_gem_object_create.part.32+0x1f/0x260 [i915]
[70841.001937] 	intel_guc_allocate_vma+0x15/0x100 [i915]
[70841.001977] 	intel_guc_log_create+0x34/0x1c0 [i915]
[70841.002014] 	intel_guc_init+0x5a/0x100 [i915]
[70841.002051] 	intel_uc_init+0x3e/0xb0 [i915]
[70841.002089] 	i915_gem_init+0x18e/0x540 [i915]
[70841.002123] 	i915_driver_load+0xa7a/0x1720 [i915]
[70841.002159] 	i915_pci_probe+0x2d/0x90 [i915]
[70841.002165] 	pci_device_probe+0x9c/0x120
[70841.002171] 	driver_probe_device+0x2a9/0x490
[70841.002177] 	__driver_attach+0xd9/0xe0
[70841.002182] 	bus_for_each_dev+0x57/0x90
[70841.002188] 	bus_add_driver+0x1eb/0x260
[70841.002193] 	driver_register+0x52/0xc0
[70841.002198] 	do_one_initcall+0x39/0x170
[70841.002462] kmem_cache_destroy drm_i915_gem_object: Slab cache still has objects

[70841.002491] Call Trace:
[70841.002497]  dump_stack+0x5e/0x8e
[70841.002503]  kmem_cache_destroy+0x1e0/0x240
[70841.002509]  ? __mutex_unlock_slowpath+0x38/0x270
[70841.002551]  i915_gem_load_cleanup+0xbc/0x130 [i915]
[70841.002586]  i915_driver_cleanup_early+0x11/0x60 [i915]
[70841.002621]  i915_driver_load+0x708/0x1720 [i915]
[70841.002629]  ? trace_hardirqs_on_caller+0xe2/0x1c0
[70841.002664]  i915_pci_probe+0x2d/0x90 [i915]
[70841.002671]  pci_device_probe+0x9c/0x120
[70841.002678]  driver_probe_device+0x2a9/0x490
[70841.002684]  __driver_attach+0xd9/0xe0
[70841.002690]  ? driver_probe_device+0x490/0x490
[70841.002696]  bus_for_each_dev+0x57/0x90
[70841.002702]  bus_add_driver+0x1eb/0x260
[70841.002708]  ? 0xffffffffa0685000
[70841.002713]  driver_register+0x52/0xc0
[70841.002719]  ? 0xffffffffa0685000
[70841.002724]  do_one_initcall+0x39/0x170
[70841.002731]  ? rcu_read_lock_sched_held+0x6f/0x80
[70841.002737]  ? kmem_cache_alloc_trace+0x27b/0x2e0
[70841.002745]  do_init_module+0x56/0x1ec
[70841.002751]  load_module+0x219e/0x2550
[70841.002758]  ? vfs_read+0x121/0x140
[70841.002766]  ? SyS_finit_module+0xa5/0xe0
[70841.002772]  SyS_finit_module+0xa5/0xe0
[70841.002781]  entry_SYSCALL_64_fastpath+0x22/0x8f
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131173241.19704-2-michal.wajdeczko@intel.comReviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Try to catch a bug we've seen in the wild where the shrinker purges the
pd/pdp from under us while allocating our paging structures.

References: https://bugs.freedesktop.org/show_bug.cgi?id=104773Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131191453.12676-1-matthew.auld@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131214440.7141-2-chris@chris-wilson.co.uk

Commit e2b763ca ("drm/i915: Remove bitmap tracking for used-pdpes")
believed that because it did not insert its freshly allocated page
directory into the pd tree, it was safe from the shrinker. I failed to
heed the lesson learnt from commit dd19674b ("drm/i915: Remove bitmap
tracking for used-ptes") that we need to pin all the levels in the tree
before hitting the shrinker or else the shrinker may free an upper layer
as we proceed to allocate the tree. Thus leaving dangling pointers
everywhere and a GPF should we hit direct reclaim at just the wrong
moment.

CPU: 0 PID: 7374 Comm: chromium Tainted: P           O    4.14.13-1-ARCH #1
Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B33.1706181928 06/18/2017
task: ffff994f696c2c40 task.stack: ffffb1a789d4c000
RIP: 0010:gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915]
RSP: 0018:ffffb1a789d4f940 EFLAGS: 00010206
RAX: 81c1788cc4f68138 RBX: ffff994f54db8000 RCX: ffff994f696c2c40
RDX: 000000023bc73003 RSI: ffff994d598b6b80 RDI: ffff994f54db8000
RBP: ffff994d598b6b80 R08: 0000000000000000 R09: 0000000000000000
R10: ffffb1a789d4f550 R11: ffff994eaf3c3208 R12: 0000000000000027
R13: 0000000000005000 R14: 0000000004e8f000 R15: ffff994f54dba000
FS:  00007f585886aa00(0000) GS:ffff994faec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004ac8e8 CR3: 00000002552c8004 CR4: 00000000003606f0
Call Trace:
 gen8_ppgtt_alloc_pdp+0x178/0x320 [i915]
 gen8_ppgtt_alloc_4lvl+0x5f/0x150 [i915]
 ppgtt_bind_vma+0x30/0x70 [i915]
 i915_vma_bind+0x68/0xd0 [i915]
 __i915_vma_do_pin+0x2d6/0x3a0 [i915]
 eb_lookup_vmas+0x7a2/0xb50 [i915]
 i915_gem_do_execbuffer+0x4d7/0x10e0 [i915]
 ? sock_wfree+0x34/0x60
 ? unix_stream_read_generic+0x1f9/0x7e0
 ? import_iovec+0x37/0xd0
 ? i915_gem_execbuffer2+0x5d/0x390 [i915]
 i915_gem_execbuffer2+0x1b7/0x390 [i915]
 ? i915_gem_execbuffer+0x2d0/0x2d0 [i915]
 drm_ioctl_kernel+0x59/0xb0 [drm]
 drm_ioctl+0x2d5/0x370 [drm]
 ? i915_gem_execbuffer+0x2d0/0x2d0 [i915]
 ? __seccomp_filter+0x3b/0x260
 do_vfs_ioctl+0xa1/0x610
 ? syscall_trace_enter+0xdb/0x2b0
 SyS_ioctl+0x74/0x80
 do_syscall_64+0x55/0x110
 entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7f584fa82d27
RSP: 002b:00007ffee14a7828 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000003b0126a1030 RCX: 00007f584fa82d27
RDX: 00007ffee14a7870 RSI: 0000000040406469 RDI: 0000000000000080
RBP: 00007ffee14a7870 R08: 0000000000000002 R09: 0000000000000077
R10: 00007f5839f2b780 R11: 0000000000000246 R12: 0000000040406469
R13: 0000000000000080 R14: 00007f5842b00040 R15: 0000000000000000
Code: 01 00 83 81 58 0a 00 00 01 48 2b 05 13 9d fd c9 48 c1 f8 06 48 c1 e0 0c 48 8d 04 d0 48 8b 56 08 48 03 05 0c 9d fd c9 48 83 ca 03 <48> 89 10 83 a9 58 0a 00 00 01 65 ff 0d 37 03 fb 3e 74 02 f3 c3
RIP: gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: ffffb1a789d4f940
Reported-by: NEric Blau <eblau@eblau.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104773
Fixes: e2b763ca ("drm/i915: Remove bitmap tracking for used-pdpes")
References: dd19674b ("drm/i915: Remove bitmap tracking for used-ptes")
Testcase: igt/drv_selftest/live_gtt (igt_ppgtt_shrink_boom)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131214440.7141-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

This enables the Mesa driver to advertise support for ARB_timer_query,
and thus an OpenGL version higher than 3.2.

Based on the CNL patch by Nanley Chery.

v2: Rebase.

Cc: Anuj Phogat <anuj.phogat@intel.com>
Cc: Nanley Chery <nanley.g.chery@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Requested-by: NAnuj Phogat <anuj.phogat@intel.com>
Tested-by: NAnuj Phogat <anuj.phogat@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-10-paulo.r.zanoni@intel.com

This patch clears a single bit. The bit is 0 by default but expected
not to be set. Explicitly clearing the bit in this patch is intended
to indicate some thinking has occurred, and that we want this bit
cleared and we are not just excepting the default value.

We also stop setting GFX_RUN_LIST_ENABLE, which is correct since that
bit is gone.

v2 (from Paulo): fix indentation.
v3: Changed GEN check to >= 11. Corrected author name.
v4 (from Paulo): improve commit message (Daniele).
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NKelvin Gardiner <kelvin.gardiner@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-9-paulo.r.zanoni@intel.com

ICL+ adds changes the PLANE_CTL_FORMAT field from [27:24] to [27:23],
however, all existing PLANE_CTL_FORMAT_* definitions still map to the
correct values.  Add an ICL_PLANE_CTL_FORMAT_MASK definition, and use
that for masking for the conversion to fourcc.

v2: No changes

v3: Change new definition name, drop comment (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-8-paulo.r.zanoni@intel.com

It's 10us for gen 11.
Reviewed-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-7-paulo.r.zanoni@intel.com

This patch introduce MBus control registers and their bit-fields
MBUS_ABOX_CTL
MBUS_BBOX_CTL
MBUS_DBOX_CTL
MBUS_UBOX_CTL

Changes Since V1:
 - Use function like macros (Paulo)
 - fix copy-paste error (Paulo)
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-6-paulo.r.zanoni@intel.com

We don't have planar pixel format support implemented for ICL yet.
ICL require 2 display planes to be allocated for Planar formats unlike
previous GEN. So ICL/GEN11 doesn't require to write Y-plane ddb data in
NV12_BUF_CFG register and PLANE_NV12_BUF_CFG register is removed in ICL.

This patch removes the PLANE_NV12_BUF_CFG write for ICL.

Changes Since V1:
 - Improve commit message as per Paulo's comment
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-5-paulo.r.zanoni@intel.com

ICL require DDB allocation of plane to be more than "minimum display
buffer needed" for each level in order to enable WM level.

This patch implements and consider the same while allocating DDB
and enabling WM.

Changes Since V1:
 - rebase
Changes Since V2:
 - Remove extra parentheses
 - Use FP16.16 only when absolutely necessary (Paulo)
Changes Since V3:
 - Rebase
Changes since v4 (from Paulo):
 - Coding style issue.
Changes since v5 (from Paulo):
 - Do the final checks according to BSpec.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-4-paulo.r.zanoni@intel.com

GEN9/10 had fixed DBuf block size of 512. Dbuf block size is not a
fixed number anymore in GEN11, it varies according to bits per pixel
and tiling. If 8bpp & Yf-tile surface, block size = 256 else block
size = 512

This patch addresses the same.

v2 (from Paulo):
  - Make it compile.
  - Fix a few coding style issues.
v3:
  - Rebase on top of upstream patches
v4 (from Paulo):
  - Bikeshed if statements (James).
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130134918.32283-3-paulo.r.zanoni@intel.com