Create Documentation/blockdev/ sub-directory and populate it.
Populate the Documentation/serial/ sub-directory.
Move MSI-HOWTO.txt to Documentation/PCI/.
Move ioctl-number.txt to Documentation/ioctl/.
Update all relevant 00-INDEX files.
Update all relevant Kconfig files and source files.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>

It was only used by this one SGI platform which recently was converted to
RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It was only used by two SGI platforms which recently were converted to
RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>

HPET_RTC_IRQ is no longer needed; HPET_EMULATE_RTC suffices and is more
correct.  (http://bugzilla.kernel.org/show_bug.cgi?id=11111)

Note that when using the legacy RTC driver, platforms don't really do a
dynamic switch between HPET and non-HPET modes based on whether HPET
hardware actually exists ...  only rtc-cmos (using the new RTC framework)
currently switches that way.

So this reflects bitrot in that legacy code, for x86/ia64: kernels with
HPET support configured (e.g.  for a clocksource) can't get IRQs from the
legacy RTC driver unless they really have HPET hardware.  (The obvious
workaround is to not use the legacy RTC driver on those platforms when you
configure HPET ...  unless you know the target really has a HPET.)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use tty_port_init and krefs in the stallion drivers to protect us from devices
going away underneath us. As with the other drives some rearranging is done to
pass the tty structure down properly on the user side.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver was declared obsolete over 2 years ago, the alternative
console driver for legacy iSeries (hvc_iseries) was made the default
over 1 year ago and this driver has been build broken for over 3
months, so remove it.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I also added a small Kconfig change that allows the user to specify the
virtio console in menuconfig.

(Fixes to export symbols from Stephen Rothwell <sfr@canb.auug.org.au>)
(Fixes for CONFIG_VIRTIO_CONSOLE=y vs CONFIG_VIRTIO=m from Christian himself)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

This patch tries to change hvc_console to not use request_irq/free_irq if
the backend does not use irqs. This allows virtio_console to use hvc_console
without having a linker reference to request_irq/free_irq.

In addition, together with patch 2/3 it improves the performance for virtio
console input. (an earlier version of this patch was tested by Yajin on lguest)

The irq specific code is moved to hvc_irq.c and selected by the drivers that
use irqs (System p, System i, XEN).

I replaced "int irq" with the opaque "int data". The request_irq and
free_irq calls are replaced with notifier_add and notifier_del. I have also
changed the code a bit to call the notifier_add and notifier_del inside the
spinlock area as the callbacks are found via hp->ops.

Changes since last version:
o remove ifdef
o reintroduce "irq_requested" as "notified"
o cleanups, sparse..

I did not move the timer based polling into a separate polling scheme. I
played with several variants, but it seems we need to sleep/schedule in
a thread even for irq based consoles, as there are throttleing and buffer
size constraints.

I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access
the irq_requested element.

Feedback is appreciated. virtio_console is currently the only available console
for kvm on s390. I plan to push this change as soon as all affected parties
agree on it. I would love to get test results from System p, Xen etc.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Remove old broken Cobalt LCD driver.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the hardware break support on the specialix driver
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert the driver to use the added hardware break support
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some hardware needs to do break handling itself and may have partial
support only. Make break_ctl return an error code. Add a tty driver flag
so you can indicate driver hardware side break support.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Nobody seems to use these drivers anyway so if they want them they can
fix them up. I don't have the needed info to add break_ctl support to them.
Send patches if you don't like it.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Go through the inlines and other oddments that are iffy. Remove various bits
of dead code and bogus debug. Turn the crtsdts compile time option into a
runtime switch.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adds a character driver for BSR support on IBM POWER systems including
Power5 and Power6.  The BSR is an optional processor facility not currently
implemented by any other processors.  It's primary purpose is fast large SMP
synchronization.  More details on the BSR are in comments to the code which
follows.  This patch adds BSR driver to pseries_defconfig.
Signed-off-by: NSonny Rao <sonnyrao@linux.vnet.ibm.com>
Signed-off-by: NJoel Schopp <jschopp@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

More Kconfig tweaks related to the legacy PC RTC code:

 - Describe the legacy PC RTC driver as such ... it's never quite
   been clear that this driver is for PC RTCs, and now it's fair
   to call this the "legacy" driver.

 - Force it to understand about HPET stealing its IRQs ... kernel
   code does this always when HPET is in use, there should be no
   option for users to goof up the config.

This seems to fix kernel bugzilla #10729.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As commit 6089093e ("ip2: fix crashes on
load/unload") fixed the ip2 crashes on load/unload by making ip2/ip2main
one module (ip2), Kconfig shouldn't mention a now non-existing module.
Signed-off-by: NRoland.Kletzing <devzero@web.de>
Acked-by: NAlan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

By turning off the new CONSOLE_TRANSLATIONS option and dropping the
associated code and tables from the kernel, we can save about 7KiB.

Taken from linux-tiny project by Tim Bird and mangled further by dwmw2.
Signed-off-by: NTim Bird <tim.bird@am.sony.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Select FW_LOADER since moxa needs it, otherwise we face link problems such
as:

drivers/built-in.o: In function
moxa_pci_probe':moxa.c:(.devinit.text+0x76d8): undefined reference to
request_firmware'
:moxa.c:(.devinit.text+0x7e6e): undefined reference to release_firmware'
make: *** [.tmp_vmlinux1] Error 1
Reported-by: NPhilippe Roussel <p.o.roussel@free.fr>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make /dev/kmem a config option; /dev/kmem is VERY rarely used, and when
used, it's generally for no good (rootkits tend to be the most common
users).  With this config option, users have the choice to disable
/dev/kmem, saving some size as well.

A patch to disable /dev/kmem has been in the Fedora and RHEL kernels for
4+ years now without any known problems or legit users of /dev/kmem.

[akpm@linux-foundation.org: make CONFIG_DEVKMEM default to y]
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kconfig tweaks to help reduce RTC configuration bugs, by avoiding
legacy RTC drivers when the generic RTC framework is enabled:

 - If rtc-cmos is selected, disable the legacy rtc driver;

 - When using generic RTC on x86, enable rtc-cmos by default;

 - In the old "chardev RTC" section of Kconfig, add a comment
   warning people off these (seven) legacy RTC drivers when
   the generic framework is in use.

People can still use the legacy drivers if they want (or need) to.

This doesn't fix the broken dependencies for the legacy "CMOS" RTC driver.
Ideally it would be a full list of platforms where it works, not a partial
list of ones where it won't.  Or better yet, it would depend on a
"HAVE_CMOS_RTC" flag defined by various platforms ...  surely there's a
Kconfig style guideline lurking there.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

initial char driver for otp memory
(only read supported atm ... needs real examples/docs for write support)

v2-v3:
 - fixup __initdata with __initconst, as we are heading for 2.6.26
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Acked-by: NJiri Slaby <jirislaby@gmail.com>

This patch fixes the following compile error:

<--  snip  -->

...
  CC [M]  drivers/char/genrtc.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/char/genrtc.c:58:21: error: asm/rtc.h: No such file or directory
...
make[3]: *** [drivers/char/genrtc.o] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

This patch fixes the following compile error:

<--  snip  -->

...
  CC [M]  drivers/char/rtc.o
In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/char/rtc.c:70:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/mc146818rtc.h:16:59: error: asm/mc146818rtc.h: No such file or directory
...
make[3]: *** [drivers/char/rtc.o] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Also update references to sonypi.txt in Kconfig.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
CC: Mattia Dongili <malattia@linux.it>
Signed-off-by: NLen Brown <len.brown@intel.com>

(Old) mxser is obsoleted by mxser_new and scheduled for removal on Dec 2007.
Remove it by renaming mxser_new to mxser.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Reviewed-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use SGI_HAS_DS1286 for SGI_DS1286 depends
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After analyzing the elements that save_flags/cli/sti/restore_flags were
protecting, convert their usages to a global spinlock (the easiest and
most obvious next-step).  There were some usages of flags being
intentionally cached, because the code already knew the state of
interrupts.  These have been taken into account.

This allows us to remove CONFIG_BROKEN_ON_SMP.  Completely untested.

[akpm@linux-foundation.org: use DEFINE_SPINLOCK]
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This includes code for new fifo-based xps_hwicap in addition to the
older opb_hwicap, which has a significantly different interface.  The
common code between the two drivers is largely shared.

Significant differences exists between this driver and what is
supported in the EDK drivers.  In particular, most of the
architecture-specific code for reconfiguring individual FPGA resources
has been removed.  This functionality is likely better provided in a
user-space support library.  In addition, read and write access is
supported.  In addition, although the xps_hwicap cores support
interrupt-driver mode, this driver only supports polled operation, in
order to make the code simpler, and since the interrupt processing
overhead is likely to slow down the throughput under Linux.
Signed-off-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This is a driver to control the cardbus wireless data card that works on
3g networks.

Greg Kroah-Hartman <gregkh@suse.de> did the initial driver cleanup.
Thanks to Arnaud Patard <apatard@mandriva.com> for help with bugfixing.
Thanks to Alan Cox for a lot of tty fixes.
Thanks to Satyam Sharma <satyam@infradead.org> for fixing buildbreakage.
Thanks to Frank Seidel <fseidel@suse.de> for a lot of bugfixes and
rewriting to make it a sane Linux driver
Thanks to Jiri Slaby <jirislaby@gmail.com> for a lot bugfixes, cleanups
and rewrites that make it much more readable.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NFrank Seidel <fseidel@suse.de>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>

Fix typo in arch/powerpc/boot/flatdevtree_env.h.
There is no Documentation/networking/ixgbe.txt.

README.cycladesZ is now in Documentation/.
wavelan.p.h is now in drivers/net/wireless/.
HFS.txt is now Documentation/filesystems/hfs.txt.
OSS-files are now in sound/oss/.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

tipar: remove obsolete module

The tipar character driver was used to implement bit-banging access
to Texas Instruments parallel link cable. A user-land method now 
exists thru PPDEV & PARPORT.
Signed-off-by: NRomain Liévin <roms@lpg.ticalc.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The count of legacy pty devices can be set by a kernel commandline
parameter. For the distro kernel, we would like to disable all pty's
by default, but keep the opportunity to request devices on the kernel
commandline.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Acked-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is an hvc-based virtio console driver.  It's suboptimal becuase
hvc expects to have raw access to interrupts and virtio doesn't assume
that, so it currently polls.

There are two solutions: expose hvc's "kick" interface, or wean off hvc.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Since default_utf8 is already a sysfs attribute, having an extra
CONFIG_VT_UNICODE compile-time option is redundant, since sysfs attributes can
be set at boot and run time.

Also let Linux VCs default to UTF-8 (as per the discussion at
http://lkml.org/lkml/2007/9/6/99).
Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Cc: Bill Nottingham <notting@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

move watchdog tree from drivers/char/watchdog to drivers/watchdog.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes hvc_init() to be called only when someone actually uses the
hvc_console driver.  Dave Jones complained when profiling bootup.

hvc_console used to only be for Power aka pSeries: now lguest and Xen both
want it built-in in case the kernel is a guest under one of those, even
though usually it will be a native boot.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>