- 16 3月, 2014 1 次提交
-
-
由 David Herrmann 提交于
Our current DRM design uses a single address_space for all users of the same DRM device. However, there is no way to create an anonymous address_space without an underlying inode. Therefore, we wait for the first ->open() callback on a registered char-dev and take-over the inode of the char-dev. This worked well so far, but has several drawbacks: - We screw with FS internals and rely on some non-obvious invariants like inode->i_mapping being the same as inode->i_data for char-devs. - We don't have any address_space prior to the first ->open() from user-space. This leads to ugly fallback code and we cannot allocate global objects early. As pointed out by Al-Viro, fs/anon_inode.c is *not* supposed to be used by drivers for anonymous inode-allocation. Therefore, this patch follows the proposed alternative solution and adds a pseudo filesystem mount-point to DRM. We can then allocate private inodes including a private address_space for each DRM device at initialization time. Note that we could use: sysfs_get_inode(sysfs_mnt->mnt_sb, drm_device->dev->kobj.sd); to get access to the underlying sysfs-inode of a "struct device" object. However, most of this information is currently hidden and it's not clear whether this address_space is suitable for driver access. Thus, unless linux allows anonymous address_space objects or driver-core provides a public inode per device, we're left with our own private internal mount point. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
-
- 05 3月, 2014 1 次提交
-
-
git://people.freedesktop.org/~deathsimple/linux由 Dave Airlie 提交于
this is the second pull request for 3.15 radeon changes. Highlights this time: - Better VRAM usage - VM page table rework - Enabling different UVD clocks again - Some general cleanups and improvements * 'drm-next-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: remove struct radeon_bo_list drm/radeon: drop non blocking allocations from sub allocator drm/radeon: remove global vm lock drm/radeon: use normal BOs for the page tables v4 drm/radeon: further cleanup vm flushing & fencing drm/radeon: separate gart and vm functions drm/radeon: fix VCE suspend/resume drm/radeon: fix missing bo reservation drm/radeon: limit how much memory TTM can move per IB according to VRAM usage drm/radeon: validate relocations in the order determined by userspace v3 drm/radeon: add buffers to the LRU list from smallest to largest drm/radeon: deduplicate code in radeon_gem_busy_ioctl drm/radeon: track memory statistics about VRAM and GTT usage and buffer moves v2 drm/radeon: add a way to get and set initial buffer domains v2 drm/radeon: use variable UVD clocks drm/radeon: cleanup the fence ring locking code drm/radeon: improve ring lockup detection code v2
-
- 04 3月, 2014 2 次提交
-
-
由 Christian König 提交于
Just move all fields into radeon_cs_reloc, removing unused/duplicated fields. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
ssh://git.freedesktop.org/git/drm-intel由 Dave Airlie 提交于
- Fix the execbuf rebind performance regression due to topic/ppgtt (Chris). - Fix up the connector cleanup ordering for sdvod i2c and dp aux devices (Imre). - Try to preserve the firmware modeset config on driver load. And a bit of prep work for smooth takeover of the fb contents (Jesse). - Prep cleanup for larger gtt address spaces on bdw (Ben). - Improve our vblank_wait code to make hsw modesets faster (Paulo). - Display debugfs file (Jesse). - DRRS prep work from Vandana Kannan. - pipestat interrupt handler to fix a few races around vblank/pageflip handling on byt (Imre). - Improve display fuse handling for display-less SKUs (Damien). - Drop locks while stalling for the gpu when serving pagefaults to improve interactivity (Chris). - And as usual piles of other improvements and small fixes all over. * tag 'drm-intel-next-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel: (65 commits) drm/i915: fix NULL deref in the load detect code drm/i915: Only bind each object rather than for every execbuffer drm/i915: Directly return the vma from bind_to_vm drm/i915: Simplify i915_gem_object_ggtt_unpin drm/i915: Allow blocking in the PDE alloc when running low on gtt space drm/i915: Don't allocate context pages as mappable drm/i915: Handle set_cache_level errors in the status page setup drm/i915: Don't pin the status page as mappable drm/i915: Don't set PIN_MAPPABLE for legacy ringbuffers drm/i915: Handle set_cache_level errors in the pipe control scratch setup drm/i915: split PIN_GLOBAL out from PIN_MAPPABLE drm/i915: Consolidate binding parameters into flags drm/i915: sdvo: add i2c sysfs symlink to the connector's directory drm/i915: sdvo: fix error path in sdvo_connector_init drm/i915: dp: fix order of dp aux i2c device cleanup drm/i915: add unregister callback to connector drm/i915: don't reference null pointer at i915_sink_crc drm/i915/lvds: Remove dead code from failing case drm/i915: don't preserve inherited configs with nothing on v2 drm/i915/bdw: Split up PPGTT cleanup ...
-
- 03 3月, 2014 13 次提交
-
-
由 Christian König 提交于
Not needed any more. Signed-off-by: NChristian König <christian.koenig@amd.com>
-
由 Christian König 提交于
Not needed any more. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
No need to make it more complicated than necessary, just allocate the page tables as normal BO and flush whenever the address change. v2: update comments and function name v3: squash bug fixes, page directory and tables patch v4: rebased on Mareks changes Signed-off-by: NChristian König <christian.koenig@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Both are complex enough on their own. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Marek Olšák 提交于
Userspace should set the first 4 bits of drm_radeon_cs_reloc::flags to a number from 0 to 15. The higher the number, the higher the priority, which means a buffer with a higher number will be validated sooner. The old behavior is preserved: Buffers used for write are prioritized over read-only buffers if the userspace doesn't set the number. v2: add buffers to buckets directly, then concatenate them v3: use a stable sort Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Marek Olšák 提交于
The statistics are: - VRAM usage in bytes - GTT usage in bytes - number of bytes moved by TTM The last one is actually a counter, so you need to sample it before and after command submission and take the difference. This is useful for finding performance bottlenecks. Userspace queries are also added. v2: use atomic64_t Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Marek Olšák 提交于
When passing buffers between processes, the receiving process needs to know the original buffer domain, so that it doesn't accidentally move the buffer. v2: reserve the buffer Signed-off-by: NMarek Olšák <marek.olsak@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
- 28 2月, 2014 3 次提交
-
-
由 Alex Deucher 提交于
Now that Christian fixed the performance problems with the feedback buffer in mesa, we can enable variable UVD clocks. There are multiple UVD power states associated with different types and numbers of streams. This uses the appropriate state based on that information rather than always using the fastest UVD clocks which saves some power. One possible downside is that this may adversely affect decode benchmarks since these power states target specific playback requirements rather than maximum performance. If that becomes an issue, we can add a sysfs attribute to force the max UVD state. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Christian König 提交于
We no longer need to take the ring lock while checking for a gpu lockup, so just cleanup the code. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Use atomics and jiffies_64, so that we don't need to have the ring mutex locked any more and avoid wrap arounds. v2: fix some checkpatch warnings Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 2月, 2014 8 次提交
-
-
git://people.freedesktop.org/~deathsimple/linux由 Dave Airlie 提交于
So this is the initial pull request for radeon drm-next 3.15. Highlights: - VCE bringup including DPM support - Few cleanups for the ring handling code * 'drm-next-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: cleanup false positive lockup handling drm/radeon: drop radeon_ring_force_activity drm/radeon: drop drivers copy of the rptr drm/radeon/cik: enable/disable vce cg when encoding v2 drm/radeon: add support for vce 2.0 clock gating drm/radeon/dpm: properly enable/disable vce when vce pg is enabled drm/radeon/dpm: enable dynamic vce state switching v2 drm/radeon: add vce dpm support for KV/KB drm/radeon: enable vce dpm on CI drm/radeon: add vce dpm support for CI drm/radeon: fill in set_vce_clocks for CIK asics drm/radeon/dpm: fetch vce states from the vbios drm/radeon/dpm: fill in some initial vce infrastructure drm/radeon/dpm: move platform caps fetching to a separate function drm/radeon: add callback for setting vce clocks drm/radeon: add VCE version parsing and checking drm/radeon: add VCE ring query drm/radeon: initial VCE support v4 drm/radeon: fix CP semaphores on CIK
-
git://ftp.arm.linux.org.uk/~rmk/linux-cubox由 Dave Airlie 提交于
Updates from Jean-Fracois for the TDA998x driver, which are on top of the fixes you have previously pulled, except these changes aren't intended for -rc, but the next merge window. Several of these are issues of correctness - passing more correct HDMI info packets, not reading registers in older chips documented as write only (despite appearing to be read/write in later chips). Others are code cleanups (using definitions rather than constants where we have them already in the kernel). Additional functionality is also added by way of optional support for the IRQ from the TDA998x, which allows us to avoid busy-waiting for the EDID reads. * 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: always use the same device for all kernel messages drm/i2c: tda998x: adjust the audio clock divider for S/PDIF drm/i2c: tda998x: code optimization drm/i2c: tda998x: remove the unused variable ca_i2s drm/i2c: tda998x: make the audio code more readable drm/i2c: tda998x: use irq for connection status and EDID read drm/i2c: tda998x: always enable EDID read IRQ drm/i2c: tda998x: add DT documentation drm/i2c: tda998x: add DT support drm/i2c: tda998x: don't read write-only registers drm/i2c: tda998x: don't freeze the system at audio startup time drm/i2c: tda998x: change probe message origin drm/i2c: tda998x: code cleanup drm/i2c: tda998x: clean up error chip version checking drm/i2c: tda998x: check more I/O errors drm/i2c: tda998x: simplify the i2c read/write functions drm/i2c: tda998x: use ALSA IEC958 definitions and update audio frequency drm/i2c: tda998x: add the active aspect in HDMI AVI frame drm/i2c: tda998x: use HDMI constants
-
ssh://git.freedesktop.org/git/drm-intel由 Dave Airlie 提交于
- Yet more steps towards atomic modeset from Ville. - DP panel power sequencing improvements from Paulo. - irq code cleanups from Ville. - 5.4 GHz dp lane clock support for bdw/hsw from Todd. - Clock readout support for hsw/bdw (aka fastboot) from Jesse. - Make pipe underruns report at ERROR level (Ville). This is to check our improved watermarks code. - Full ppgtt support from Ben for gen7. - More fbc fixes and improvements from Ville all over the place, unfortunately not yet enabled by default on more platforms. - w/a cleanups from Ville. - HiZ stall optimization settings (Chia-I Wu). - Display register mmio offset refactor patch from Antti. - RPS improvements for corner-cases from Jeff McGee. * tag 'drm-intel-next-2014-02-07' of ssh://git.freedesktop.org/git/drm-intel: (166 commits) drm/i915: Update rps interrupt limits drm/i915: Restore rps/rc6 on reset drm/i915: Prevent recursion by retiring requests when the ring is full drm/i915: Generate a hang error code drm/i915: unify FLIP_DONE macro names drm/i915: vlv: s/spin_lock_irqsave/spin_lock/ in irq handler drm/i915: factor out valleyview_pipestat_irq_handler drm/i915: vlv: don't unmask IIR[DISPLAY_PIPE_A/B_VBLANK] interrupt drm/i915: Reorganize display pipe register accesses drm/i915: Treat using a purged buffer as a source of EFAULT drm/i915: Convert EFAULT into a silent SIGBUS drm/i915: release mutex in i915_gem_init()'s error path drm/i915: check for oom when allocating private_default_ctx drm/i915/vlv: WA to fix Voltage not getting dropped to Vmin when Gfx is power gated. drm/i915: Get rid of acthd based guilty batch search drm/i915: Use hangcheck score to find guilty context drm/i915: Drop WaDisablePSDDualDispatchEnable:ivb for IVB GT2 drm/i915: Fix IVB GT2 WaDisableDopClockGating and WaDisablePSDDualDispatchEnable drm/i915: Don't access snooped pages through the GTT (even for error capture) drm/i915: Only print information for filing bug reports once ... Conflicts: drivers/gpu/drm/i915/intel_dp.c
-
git://anongit.freedesktop.org/tegra/linux由 Dave Airlie 提交于
drm: DisplayPort AUX framework for v3.15-rc1 This series of patches implements a small framework that abstracts away some of the functionality that the DisplayPort AUX channel provides. It comes with a set of generic helpers that use the driver implementations to reduce code duplication. * tag 'drm/dp-aux-for-3.15-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/dp: Allow registering AUX channels as I2C busses drm/dp: Add DisplayPort link helpers drm/dp: Add drm_dp_dpcd_read_link_status() drm/dp: Add AUX channel infrastructure
-
由 Thierry Reding 提交于
Implements an I2C-over-AUX I2C adapter on top of the generic drm_dp_aux infrastructure. It extracts the retry logic from existing drivers, which should help in porting those drivers to this new helper. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NThierry Reding <treding@nvidia.com> --- Changes in v5: - move comments partially to to header file - keep MOT set between I2C messages - return -EPROTO on short reads Changes in v4: - fix typo "bitrate" -> "bit rate" Changes in v3: - add back DRM_DEBUG_KMS and DRM_ERROR messages - embed i2c_adapter within struct drm_dp_aux - fix typo in comment
-
由 Thierry Reding 提交于
Add a helper to probe a DP link (read out the supported DPCD revision, maximum rate, link count and capabilities) as well as power up the DP link and configure it accordingly. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NThierry Reding <treding@nvidia.com> --- Changes in v5: - export helpers Changes in v4: - fix a couple of typos in comments as pointed out by Alex Deucher Changes in v3: - split into drm_dp_link_power_up() and drm_dp_link_configure() - do not change sink state for DPCD versions earlier than 1.1 - sleep for 1-2 ms after setting local sink to D0 state - read and write consecutive registers where possible - read DPCD revision when link is probed - remove duplicate kerneldoc
-
由 Thierry Reding 提交于
The function reads the link status (6 bytes starting at offset 0x202) from the DPCD so that it can be conveniently passed to other DPCD helpers. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Thierry Reding 提交于
This is a superset of the current i2c_dp_aux bus functionality and can be used to transfer native AUX in addition to I2C-over-AUX messages. Helpers are provided to read and write the DPCD, either blockwise or byte-wise. Many of the existing helpers for DisplayPort take a copy of a portion of the DPCD and operate on that, without a way to write data back to the DPCD (e.g. for configuration of the link). Subsequent patches will build upon this infrastructure to provide common functionality in a generic way. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NThierry Reding <treding@nvidia.com> --- Changes in v5: - move comments partially to struct drm_dp_aux_msg in header file - return -EPROTO on short reads in DPCD helpers Changes in v4: - fix a typo in a comment Changes in v3: - reorder drm_dp_dpcd_writeb() arguments to be more intuitive - return number of bytes transferred in drm_dp_dpcd_write() - factor out drm_dp_dpcd_access() - describe error codes
-
- 24 2月, 2014 10 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A collection of fixes for ARM platforms. Most are fixes for DTS files, mostly from DT conversion on OMAP which is still finding a few issues here and there. There's a couple of small stale code removal patches that we usually queue for the next release instead, but they seemed harmless enough to bring in now. Also, a fix for backlight on some PXA platforms, and a cache configuration fix for Tegra, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer ARM: tegra: only run PL310 init on systems with one ARM: tegra: Add head numbers to display controllers ARM: imx6: build pm-imx6q.c independently of CONFIG_PM ARM: tegra: fix RTC0 alias for Cardhu ARM: dove: dt: revert PMU interrupt controller node Documentation: dt: OMAP: Update Overo/Tobi ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi ARM: dts: omap3-tobi: Use the correct vendor prefix ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo ARM: OMAP2+: Remove legacy macros for zoom platforms ARM: OMAP2+: Remove MACH_NOKIA_N800 ARM: dts: N900: add missing compatible property ARM: dts: N9/N950: fix boot hang with 3.14-rc1 ARM: OMAP1: nokia770: enable tahvo-usb ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module ARM: dts: omap3-gta04: Fix mmc1 properties. ARM: dts: omap3-gta04: Fix 'aux' gpio key flags. ARM: OMAP2+: add missing ARCH_HAS_OPP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator由 Linus Torvalds 提交于
Pull regulator fixes from Mark Brown: "Mostly unexciting driver fixes, plus one fix to lower the severity of the log message when we don't use an optional regulator - the fixes for ACPI system made this come up more often and it was correctly observed that it was causing undue concern for users" * tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max14577: Fix invalid return value on DT parse success regulator: core: Change dummy supplies error message to a warning regulator: s5m8767: Add missing of_node_put regulator: s5m8767: Use of_get_child_by_name regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Thomas Gleixner: "Serialize the registration of a new sched_clock in the currently ARM only generic sched_clock facilty to avoid sched_clock havoc" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched_clock: Prevent callers from seeing half-updated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - a bugfix which prevents a divide by 0 panic when the newly introduced try_msr_calibrate_tsc() fails - enablement of the Baytrail platform to utilize the newfangled msr based calibration * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: tsc: Add missing Baytrail frequency to the table x86, tsc: Fallback to normal calibration if fast MSR calibration fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "Another four fixlets to tame the ARM orion irq chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: orion: Fix getting generic chip pointer. irqchip: orion: clear stale interrupts in irq_startup irqchip: orion: use handle_edge_irq on bridge irqs irqchip: orion: clear bridge cause register on init
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a number of USB fixes for reported issues for 3.14-rc4 The majority of these are for USB gadget, phy, and musb driver issues. And there's a few new device ids thrown in for good measure" * tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: need to mask when writting endptflush and endptprime usb: musb: correct use of schedule_delayed_work() usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP usb: gadget: fix NULL pointer dereference usb: gadget: printer: using gadget_is_otg to check otg support at runtime phy: let phy_provider_register be the last step in registering PHY phy-core: Don't allow building phy-core as a module phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller phy-core: phy_get: Leave error logging to the caller phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM usb: musb: correct use of schedule_delayed_work() usb: musb: do not sleep in atomic context USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8 USB: EHCI: add delay during suspend to prevent erroneous wakeups usb: gadget: bcm63xx_udc: fix build failure on DMA channel code usb: musb: do not sleep in atomic context usb: gadget: s3c2410_udc: Fix build error usb: musb: core: Fix remote-wakeup resume usb: musb: host: Fix SuperSpeed hub enumeration usb: musb: fix obex in g_nokia.ko causing kernel panic
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull TTY revert from Greg KH: "Here is a single commit, a revert of a sysfs file change that ended up breaking a userspace tool" * tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: Set correct tty name in 'active' sysfs attribute"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging tree fix from Greg KH: "Here is a single android driver fix for 3.14-rc4 that fixes a reported problem in the binder driver" * tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: binder: Fix death notifications
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fix from Greg KH: "Here is a single commit, to fix a reported problem in the mei driver" * tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: set client's read_cb to NULL when flow control fails
-
- 23 2月, 2014 2 次提交
-
-
由 Matt Porter 提交于
Add myself as an additional maintainer for the Broadcom mobile SoCs. Signed-off-by: NMatt Porter <mporter@linaro.org> Acked-by: NChristian Daudt <bcm@fixthebug.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Mark Brown 提交于
Merge remote-tracking branches 'regulator/fix/da9063', 'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
-