ima_init() is used as a single place for all initializations.
Experimental keyring patches used the 'late_initcall' which was
co-located with the late_initcall(init_ima). When the late_initcall
for the keyring initialization was abandoned, initialization moved
to init_ima, though it would be more logical to move it to ima_init,
where the rest of the initialization is done. This patch moves the
keyring initialization to ima_init() as a preparatory step for
loading the keys which will be added to ima_init() in following
patches.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The kernel print macros use the KBUILD_MODNAME, which is initialized
to the module name. The current integrity/Makefile makes every file
as its own module, so pr_xxx messages are prefixed with the file name
instead of the module.  Similar to the evm/Makefile and ima/Makefile,
this patch fixes the integrity/Makefile to use the single name
'integrity'.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The integrity subsystem has lots of options and takes more than
half of the security menu.  This patch consolidates the options
under "integrity", which are hidden if not enabled.  This change
does not affect existing configurations.  Re-configuration is not
needed.

Changes v4:
- no need to change "integrity subsystem" to menuconfig as
options are hidden, when not enabled. (Mimi)
- add INTEGRITY Kconfig help description

Changes v3:
- dependency to INTEGRITY removed when behind 'if INTEGRITY'

Changes v2:
- previous patch moved integrity out of the 'security' menu.
  This version keeps integrity as a security option (Mimi).
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

For better visual appearance it is better to co-locate
asymmetric key options together with signature support.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

IMA uses only one template. This patch initializes only required
template to avoid unnecessary memory allocations.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Reviewed-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

In all cases except ima_bprm_check() the filename was not defined
and ima_d_path() was used to find the full path.  Unfortunately,
the bprm filename is a relative pathname (eg. ./<dir>/filename).

ima_bprm_check() selects between bprm->interp and bprm->filename.
The following dump demonstrates the differences between using
filename and interp.

bprm->filename
 filename: ./foo.sh, pathname: /root/bin/foo.sh
 filename: ./foo.sh, pathname: /bin/dash

bprm->interp
 filename: ./foo.sh, pathname: /root/bin/foo.sh
 filename: /bin/sh, pathname: /bin/dash

In both cases the pathnames are currently the same.  This patch
removes usage of filename and interp in favor of d_absolute_path.

Changes v3:
- 11 extra bytes for "deleted" not needed (Mimi)
- purpose "replace relative bprm filename with full pathname" (Mimi)

Changes v2:
- use d_absolute_path() instead of d_path to work in chroot environments.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

ima_get_action() sets the "action" flags based on policy.
Before collecting, measuring, appraising, or auditing the
file, the "action" flag is updated based on the cached
iint->flags.

This patch removes the subsequent unnecessary appraisal
test in ima_appraise_measurement().
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Add missing keywords to the function definition to cleanup
to discard initialization code.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Reviewed-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

'function' variable value can be changed instead of
allocating extra '_func' variable.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Precede bit testing before string comparison makes code
faster. Also refactor statement as a single line pointer
assignment. Logic is following: we set 'xattr_ptr' to read
xattr value when we will do appraisal or in any case when
measurement template is other than 'ima'.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Commit f381c272 "integrity: move ima inode integrity data management"
(re)moved few functions but left their declarations in header files.
This patch removes them and also removes duplicated declaration of
integrity_iint_find().

Commit c7de7adc "ima: remove unused cleanup functions".  This patch
removes these definitions as well.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

If file has IMA signature, IMA in enforce mode, but key is missing
then file access is blocked and single error message is printed.

If IMA appraisal is enabled in fix mode, then system runs as usual
but might produce tons of 'Request for unknown key' messages.

This patch switches 'pr_warn' to 'pr_err_ratelimited'.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Empty files and missing xattrs do not guarantee that a file was
just created.  This patch passes FILE_CREATED flag to IMA to
reliably identify new files.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+

Unless an LSM labels a file during d_instantiate(), newly created
files are not labeled with an initial security.evm xattr, until
the file closes.  EVM, before allowing a protected, security xattr
to be written, verifies the existing 'security.evm' value is good.
For newly created files without a security.evm label, this
verification prevents writing any protected, security xattrs,
until the file closes.

Following is the example when this happens:
fd = open("foo", O_CREAT | O_WRONLY, 0644);
setxattr("foo", "security.SMACK64", value, sizeof(value), 0);
close(fd);

While INTEGRITY_NOXATTRS status is handled in other places, such
as evm_inode_setattr(), it does not handle it in all cases in
evm_protect_xattr().  By limiting the use of INTEGRITY_NOXATTRS to
newly created files, we can now allow setting "protected" xattrs.

Changelog:
- limit the use of INTEGRITY_NOXATTRS to IMA identified new files
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+

On ima_file_free(), newly created empty files are not labeled with
an initial security.ima value, because the iversion did not change.
Commit dff6efc3 "fs: fix iversion handling" introduced a change in
iversion behavior.  To verify this change use the shell command:

  $ (exec >foo)
  $ getfattr -h -e hex -d -m security foo

This patch defines the IMA_NEW_FILE flag.  The flag is initially
set, when IMA detects that a new file is created, and subsequently
checked on the ima_file_free() hook to set the initial security.ima
value.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.14+

This patch fixes a bug, where evm_verify_hmac() returns INTEGRITY_PASS
if inode->i_op->getxattr() returns an error in evm_find_protected_xattrs.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>

This patch fixes checkpatch 'return' warnings introduced with commit
9819cf25 "checkpatch: warn on unnecessary void function return statements".

Use scripts/checkpatch.pl --file security/integrity/evm/evm_main.c
to produce the warnings.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

3.16 commit aad4f8bb
'switch simple generic_file_aio_read() users to ->read_iter()'
replaced ->aio_read with ->read_iter in most of the file systems
and introduced new_sync_read() as a replacement for do_sync_read().

Most of file systems set '->read' and ima_kernel_read is not affected.
When ->read is not set, this patch adopts fallback call changes from the
vfs_read.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>  3.16+

This patch fixes the case where the file's signature/hash xattr contains
an invalid hash algorithm.  Although we can not verify the xattr, we still
need to measure the file.  Use the default IMA hash algorithm.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The patch 3bcced39: "ima: use ahash API for file hash
calculation" from Feb 26, 2014, leads to the following static checker
warning:

security/integrity/ima/ima_crypto.c:204 ima_alloc_atfm()
         error: buffer overflow 'hash_algo_name' 17 <= 17

Unlike shash tfm memory, which is allocated on initialization, the
ahash tfm memory allocation is deferred until needed.

This patch fixes the case where ima_ahash_tfm has not yet been
allocated and the file's signature/hash xattr contains an invalid hash
algorithm.  Although we can not verify the xattr, we still need to
measure the file.  Use the default IMA hash algorithm.

Changelog:
- set valid algo before testing tfm - based on Dmitry's comment
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>

The "security: introduce kernel_fw_from_file hook" patch defined a
new security hook to evaluate any loaded firmware that wasn't built
into the kernel.

This patch defines ima_fw_from_file(), which is called from the new
security hook, to measure and/or appraise the loaded firmware's
integrity.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NKees Cook <keescook@chromium.org>

Require all keys added to the IMA keyring be signed by an
existing trusted key on the system trusted keyring.

Changelog v6:
- remove ifdef CONFIG_IMA_TRUSTED_KEYRING in C code - Dmitry
- update Kconfig dependency and help
- select KEYS_DEBUG_PROC_KEYS - Dmitry

Changelog v5:
- Move integrity_init_keyring() to init_ima() - Dmitry
- reset keyring[id] on failure - Dmitry

Changelog v1:
- don't link IMA trusted keyring to user keyring

Changelog:
- define stub integrity_init_keyring() function (reported-by Fengguang Wu)
- differentiate between regular and trusted keyring names.
- replace printk with pr_info (D. Kasatkin)
- only make the IMA keyring a trusted keyring (reported-by D. Kastatkin)
- define stub integrity_init_keyring() definition based on
  CONFIG_INTEGRITY_SIGNATURE, not CONFIG_INTEGRITY_ASYMMETRIC_KEYS.
  (reported-by Jim Davis)
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Acked-by: NDavid Howells <dhowells@redhat.com>

The asynchronous hash API allows initiating a hash calculation and
then performing other tasks, while waiting for the hash calculation
to complete.

This patch introduces usage of double buffering for simultaneous
hashing and reading of the next chunk of data from storage.

Changes in v3:
- better comments
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Use of multiple-page collect buffers reduces:
1) the number of block IO requests
2) the number of asynchronous hash update requests

Second is important for HW accelerated hashing, because significant
amount of time is spent for preparation of hash update operation,
which includes configuring acceleration HW, DMA engine, etc...
Thus, HW accelerators are more efficient when working on large
chunks of data.

This patch introduces usage of multi-page collect buffers. Buffer size
can be specified using 'ahash_bufsize' module parameter. Default buffer
size is 4096 bytes.

Changes in v3:
- kernel parameter replaced with module parameter
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Async hash API allows the use of HW acceleration for hash calculation.
It may give significant performance gain and/or reduce power consumption,
which might be very beneficial for battery powered devices.

This patch introduces hash calculation using ahash API. ahash performance
depends on the data size and the particular HW. Depending on the specific
system, shash performance may be better.

This patch defines 'ahash_minsize' module parameter, which is used to
define the minimal file size to use with ahash.  If this minimum file size
is not set or the file is smaller than defined by the parameter, shash will
be used.

Changes in v3:
- kernel parameter replaced with module parameter
- pr_crit replaced with pr_crit_ratelimited
- more comment changes - Mimi

Changes in v2:
- ima_ahash_size became as ima_ahash
- ahash pre-allocation moved out from __init code to be able to use
  ahash crypto modules. Ahash allocated once on the first use.
- hash calculation falls back to shash if ahash allocation/calculation fails
- complex initialization separated from variable declaration
- improved comments
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Replace spaces in op keyword labels in log output since userspace audit tools
can't parse orphaned keywords.
Reported-by: NSteve Grubb <sgrubb@redhat.com>
Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

process_measurement() always calls ima_template_desc_current(),
including when an IMA policy has not been defined.

This patch delays template descriptor lookup until action is
determined.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Before 2.6.39 inode->i_readcount was maintained by IMA. It was not atomic
and protected using spinlock. For 2.6.39, i_readcount was converted to
atomic and maintaining was moved VFS layer. Spinlock for some unclear
reason was replaced by i_mutex.

After analyzing the code, we came to conclusion that i_mutex locking is
unnecessary, especially when an IMA policy has not been defined.

This patch removes i_mutex locking from ima_rdwr_violation_check().
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Commit 8aac6270 "move exit_task_namespaces() outside of exit_notify"
introduced the kernel opps since the kernel v3.10, which happens when
Apparmor and IMA-appraisal are enabled at the same time.

----------------------------------------------------------------------
[  106.750167] BUG: unable to handle kernel NULL pointer dereference at
0000000000000018
[  106.750221] IP: [<ffffffff811ec7da>] our_mnt+0x1a/0x30
[  106.750241] PGD 0
[  106.750254] Oops: 0000 [#1] SMP
[  106.750272] Modules linked in: cuse parport_pc ppdev bnep rfcomm
bluetooth rpcsec_gss_krb5 nfsd auth_rpcgss nfs_acl nfs lockd sunrpc
fscache dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp
kvm_intel snd_hda_codec_hdmi kvm crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul
ablk_helper cryptd snd_hda_codec_realtek dcdbas snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi
snd_seq_midi_event snd_rawmidi psmouse snd_seq microcode serio_raw
snd_timer snd_seq_device snd soundcore video lpc_ich coretemp mac_hid lp
parport mei_me mei nbd hid_generic e1000e usbhid ahci ptp hid libahci
pps_core
[  106.750658] CPU: 6 PID: 1394 Comm: mysqld Not tainted 3.13.0-rc7-kds+ #15
[  106.750673] Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A08
09/19/2012
[  106.750689] task: ffff8800de804920 ti: ffff880400fca000 task.ti:
ffff880400fca000
[  106.750704] RIP: 0010:[<ffffffff811ec7da>]  [<ffffffff811ec7da>]
our_mnt+0x1a/0x30
[  106.750725] RSP: 0018:ffff880400fcba60  EFLAGS: 00010286
[  106.750738] RAX: 0000000000000000 RBX: 0000000000000100 RCX:
ffff8800d51523e7
[  106.750764] RDX: ffffffffffffffea RSI: ffff880400fcba34 RDI:
ffff880402d20020
[  106.750791] RBP: ffff880400fcbae0 R08: 0000000000000000 R09:
0000000000000001
[  106.750817] R10: 0000000000000000 R11: 0000000000000001 R12:
ffff8800d5152300
[  106.750844] R13: ffff8803eb8df510 R14: ffff880400fcbb28 R15:
ffff8800d51523e7
[  106.750871] FS:  0000000000000000(0000) GS:ffff88040d200000(0000)
knlGS:0000000000000000
[  106.750910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  106.750935] CR2: 0000000000000018 CR3: 0000000001c0e000 CR4:
00000000001407e0
[  106.750962] Stack:
[  106.750981]  ffffffff813434eb ffff880400fcbb20 ffff880400fcbb18
0000000000000000
[  106.751037]  ffff8800de804920 ffffffff8101b9b9 0001800000000000
0000000000000100
[  106.751093]  0000010000000000 0000000000000002 000000000000000e
ffff8803eb8df500
[  106.751149] Call Trace:
[  106.751172]  [<ffffffff813434eb>] ? aa_path_name+0x2ab/0x430
[  106.751199]  [<ffffffff8101b9b9>] ? sched_clock+0x9/0x10
[  106.751225]  [<ffffffff8134a68d>] aa_path_perm+0x7d/0x170
[  106.751250]  [<ffffffff8101b945>] ? native_sched_clock+0x15/0x80
[  106.751276]  [<ffffffff8134aa73>] aa_file_perm+0x33/0x40
[  106.751301]  [<ffffffff81348c5e>] common_file_perm+0x8e/0xb0
[  106.751327]  [<ffffffff81348d78>] apparmor_file_permission+0x18/0x20
[  106.751355]  [<ffffffff8130c853>] security_file_permission+0x23/0xa0
[  106.751382]  [<ffffffff811c77a2>] rw_verify_area+0x52/0xe0
[  106.751407]  [<ffffffff811c789d>] vfs_read+0x6d/0x170
[  106.751432]  [<ffffffff811cda31>] kernel_read+0x41/0x60
[  106.751457]  [<ffffffff8134fd45>] ima_calc_file_hash+0x225/0x280
[  106.751483]  [<ffffffff8134fb52>] ? ima_calc_file_hash+0x32/0x280
[  106.751509]  [<ffffffff8135022d>] ima_collect_measurement+0x9d/0x160
[  106.751536]  [<ffffffff810b552d>] ? trace_hardirqs_on+0xd/0x10
[  106.751562]  [<ffffffff8134f07c>] ? ima_file_free+0x6c/0xd0
[  106.751587]  [<ffffffff81352824>] ima_update_xattr+0x34/0x60
[  106.751612]  [<ffffffff8134f0d0>] ima_file_free+0xc0/0xd0
[  106.751637]  [<ffffffff811c9635>] __fput+0xd5/0x300
[  106.751662]  [<ffffffff811c98ae>] ____fput+0xe/0x10
[  106.751687]  [<ffffffff81086774>] task_work_run+0xc4/0xe0
[  106.751712]  [<ffffffff81066fad>] do_exit+0x2bd/0xa90
[  106.751738]  [<ffffffff8173c958>] ? retint_swapgs+0x13/0x1b
[  106.751763]  [<ffffffff8106780c>] do_group_exit+0x4c/0xc0
[  106.751788]  [<ffffffff81067894>] SyS_exit_group+0x14/0x20
[  106.751814]  [<ffffffff8174522d>] system_call_fastpath+0x1a/0x1f
[  106.751839] Code: c3 0f 1f 44 00 00 55 48 89 e5 e8 22 fe ff ff 5d c3
0f 1f 44 00 00 55 65 48 8b 04 25 c0 c9 00 00 48 8b 80 28 06 00 00 48 89
e5 5d <48> 8b 40 18 48 39 87 c0 00 00 00 0f 94 c0 c3 0f 1f 80 00 00 00
[  106.752185] RIP  [<ffffffff811ec7da>] our_mnt+0x1a/0x30
[  106.752214]  RSP <ffff880400fcba60>
[  106.752236] CR2: 0000000000000018
[  106.752258] ---[ end trace 3c520748b4732721 ]---
----------------------------------------------------------------------

The reason for the oops is that IMA-appraisal uses "kernel_read()" when
file is closed. kernel_read() honors LSM security hook which calls
Apparmor handler, which uses current->nsproxy->mnt_ns. The 'guilty'
commit changed the order of cleanup code so that nsproxy->mnt_ns was
not already available for Apparmor.

Discussion about the issue with Al Viro and Eric W. Biederman suggested
that kernel_read() is too high-level for IMA. Another issue, except
security checking, that was identified is mandatory locking. kernel_read
honors it as well and it might prevent IMA from calculating necessary hash.
It was suggested to use simplified version of the function without security
and locking checks.

This patch introduces special version ima_kernel_read(), which skips security
and mandatory locking checking. It prevents the kernel oops to happen.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Suggested-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>

Calculating the 'security.evm' HMAC value requires access to the
EVM encrypted key.  Only the kernel should have access to it.  This
patch prevents userspace tools(eg. setfattr, cp --preserve=xattr)
from setting/modifying the 'security.evm' HMAC value directly.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>

When IMA did not support ima-appraisal, existance of the S_IMA flag
clearly indicated that the file was measured. With IMA appraisal S_IMA
flag indicates that file was measured and/or appraised. Because of
this, when measurement is not enabled by the policy, violations are
still reported.

To differentiate between measurement and appraisal policies this
patch checks the inode integrity cache flags.  The IMA_MEASURED
flag indicates whether the file was actually measured, while the
IMA_MEASURE flag indicates whether the file should be measured.
Unfortunately, the IMA_MEASURED flag is reset to indicate the file
needs to be re-measured.  Thus, this patch checks the IMA_MEASURE
flag.

This patch limits the false positive violation reports, but does
not fix it entirely.  The IMA_MEASURE/IMA_MEASURED flags are
indications that, at some point in time, the file opened for read
was in policy, but might not be in policy now (eg. different uid).
Other changes would be needed to further limit false positive
violation reports.

Changelog:
- expanded patch description based on conversation with Roberto (Mimi)
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

ima_rdwr_violation_check is called for every file openning.
The function checks the policy even when violation condition
is not met. It causes unnecessary policy checking.

This patch does policy checking only if violation condition is met.

Changelog:
- check writecount is greater than zero (Mimi)
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Newer versions of SMACK introduced following security xattrs:
SMACK64EXEC, SMACK64TRANSMUTE and SMACK64MMAP.

To protect these xattrs, this patch includes them in the HMAC
calculation.  However, for backwards compatibility with existing
labeled filesystems, including these xattrs needs to be
configurable.

Changelog:
- Add SMACK dependency on new option (Mimi)
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Using HMAC version limits the posibility to arbitrarily add new
attributes such as SMACK64EXEC to the hmac calculation.

This patch replaces hmac version with attribute mask.
Desired attributes can be enabled with configuration parameter.
It allows to build kernels which works with previously labeled
filesystems.

Currently supported attribute is 'fsuuid' which is equivalent of
the former version 2.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Even though a new xattr will only be appraised on the next access,
set the DIGSIG flag to prevent a signature from being replaced with
a hash on file close.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Files are measured or appraised based on the IMA policy.  When a
file, in policy, is opened with the O_DIRECT flag, a deadlock
occurs.

The first attempt at resolving this lockdep temporarily removed the
O_DIRECT flag and restored it, after calculating the hash.  The
second attempt introduced the O_DIRECT_HAVELOCK flag. Based on this
flag, do_blockdev_direct_IO() would skip taking the i_mutex a second
time.  The third attempt, by Dmitry Kasatkin, resolves the i_mutex
locking issue, by re-introducing the IMA mutex, but uncovered
another problem.  Reading a file with O_DIRECT flag set, writes
directly to userspace pages.  A second patch allocates a user-space
like memory.  This works for all IMA hooks, except ima_file_free(),
which is called on __fput() to recalculate the file hash.

Until this last issue is addressed, do not 'collect' the
measurement for measuring, appraising, or auditing files opened
with the O_DIRECT flag set.  Based on policy, permit or deny file
access.  This patch defines a new IMA policy rule option named
'permit_directio'.  Policy rules could be defined, based on LSM
or other criteria, to permit specific applications to open files
with the O_DIRECT flag set.

Changelog v1:
- permit or deny file access based IMA policy rules
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Cc: <stable@vger.kernel.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Store and log all PIDs with reference to the initial PID namespace and
use the access functions task_pid_nr() and task_tgid_nr() for task->pid
and task->tgid.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
(informed by ebiederman's c776b5d2)
Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>

If keys are not enabled, EVM is not visible in the configuration menu.
It may be difficult to figure out what to do unless you really know.
Other subsystems as NFS, CIFS select keys automatically. This patch does
the same.

This patch also removes '(TRUSTED_KEYS=y || TRUSTED_KEYS=n)' dependency,
which is unnecessary. EVM does not depend on trusted keys, but on
encrypted keys. evm.h provides compile time dependency.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Memory allocation is unnecessary for empty files.
This patch calculates the hash without memory allocation.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>