Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- add printk KERN_ levels to each printk
- substitute printk with dev_* when device struct is available
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

don't fetch it to uchar
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pde, ctl_phys and base_phys are useless -- they are never used.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not export internal card data to userspace. cytune doesn't use this
anyway.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

isicom, use pr_debug
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Test if base addr is non-null in ISR to prove the card has been correctly
initialized.  This is needed for DEBUG_SHIRQ for example.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without this patch, the driver sometimes causes "IRQXX: Nobody cares".  Fix it
by turning off irqs when releasing.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not register all tty devices at the init time, delay it for the time until
some device is found.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- do not panic if tty_register_driver fails
- handle fail paths properly
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move probing code to separate function for easy pci probing conversion.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There will be no other choice after introducing pci probing anyway.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fork remove code for pci -- move it to separate, new, function and don't care
about pci in the former.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move Ze init code into new cy_init_Ze, because we will need it in another
place and it will make the code totally unreadable.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cyclades, remove useless casts
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cyclades, remove volatiles
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cyclades, timer cleanup
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cyclades, cy_readX/writeX cleanup

- cy_readX are placeholders for readX, remove it
- move cy_writeX macros into do {} while(0) to be safe
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cyclades, remove PAUSE

PAUSE expands to do {} while (0), it's useless.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Include the new linux/kdebug.h instead of asm/kdebug.h.

Simply remove the asm/kdebug.h include if both had been included.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The misc character device driver uses a semaphore as mutex.  Use the mutex API
instead of the (binary) semaphore.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The TPM driver uses two semaphores as mutexes.  Use the mutex API instead of
the (binary) semaphores.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: Kylene Hall <kjhall@us.ibm.com>
Cc: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The RocketPort driver uses a semaphore as mutex.  Use the mutex API instead of
the (binary) semaphore.
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change synclink_gt driver to use dynamic tty device registration.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I noticed that the moxa input checking security bug described by
CVE-2005-0504 appears to remain unfixed upstream.

The issue is described here:
  http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2005-0504

Debian has been shipping the following patch from Andres Salomon.

(akpm: it's a privileged operation)
Signed-off-by: Ndann frazier <dannf@hp.com>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

flush_scheduled_work() can sleep, and we're calling it under spinlock.

AFAICS, moving flush_scheduled_work before spin_lock() should not cause any
problems.

Reason being - The only thing that can race against tpm_release is tpm_open
(tpm_release is called when last reference to the file is closed and only
thing that can happen after that is tpm_open??) and tpm_open acquires
driver_lock and more over it bails out with EBUSY if chip->num_opens is
greater than 0.

I also moved chip->num_pending-- to after deleting timer and setting data
pending as it looks more correct for the paranoid although it probably doesn't
matter as it is guarded by driver_lock.  None the less this change should not
cause problems.

While I was at it I noticed a missing NULL check in tpm_register_hardware
which is fixed with this patch as well.
Signed-off-by: NParag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

use __set_current_state(TASK_*) instead of current->state = TASK_*,
Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The UTF-8 part of the vt driver suffers from the following issues which are
addressed in my patch:

1) If there's no glyph found for a particular valid UTF-8 character, we try
   to display U+FFFD. However if this one is not found either, here's what
   the current kernel does:

   - First, if the Unicode value is less than the number of glyphs, use the
     glyph directly from that position of the glyph table. While it may be a
     good idea in the 8-bit world, it has absolutely no sense with Unicode
     in mind. For example, if a Latin-2 font is loaded and an application
     prints U+00FB ("u with circumflex", not present in Latin-2) then as a
     fallback solution the glyph from the 0xFB position of the Latin-2
     fontset (which is an "u with double accent" - a different character) is
     displayed.

   - Second, if this fallback fails too, a simple ASCII question mark is
     printed, which is visually undistinguishable from a real question mark.

   I changed the code to skip the first step (except if in non-UTF-8 mode),
   and changed the second step to print the question mark with inverse color
   attributes, so it is visually clear that it's not a real question mark,
   and resembles more to the common glyph of U+FFFD.

2) The UTF-8 decoder is buggy in many ways:

   - Lone continuation bytes (section 3.1 of Markus Kuhn's UTF-8 stress
     test) are not caught, they are displayed as some "random" (taken
     directly form the font table, see above) glyphs instead the replacement
     character.

   - Incomplete sequences (sections 3.2 and 3.3 of the stress test) emit no
     replacement character, but rather cause the subsequent valid character
     to be displayed more times(!).

   - The decoder is not safe: overlong sequences are not caught currently,
     they are displayed as if these were valid representations. This may
     even have security impacts.

   - The decoder does not handle D800..DFFF and FFFE..FFFF specially, it
     just emits these code points and lets it be looked up in the glyph
     table. Since these are invalid code points, I replace them by U+FFFD
     and hence give no chance for them to be looked up in the glyph table.
     (Assuming no font ships glyphs for these code points, this change is
     not visible to the users since the glyph shown will be the same.)

   With my fixes to the decoder it now behaves exactly as Markus Kuhn's
   stress test recommends.

3) It has no concept of double-width (CJK) characters. It's way beyond the
   scope of my patch to try to display them, but at least I think it's
   important for the cursor to jump two positions when printing such
   characters, since this is what applications (such as text editors)
   expect. Currently the cursor only jumps one position, and hence
   applications suffer from displaying and refreshing problems, and editing
   some English letters that are preceded by some CJK characters in the same
   line is a nightmare. With my patch an additional space is inserted after
   the CJK character has been printed (which usually means a replacement
   symbol of course). (If U+FFFD isn't availble and hence an inverse
   question mark is displayed in the first cell, I keep the inverted state
   for the space in the 2nd column so it's quite easy to see that they are
   tied together.)

4) There is a small built-in table of zero-width spaces that are not to be
   printed but silently skipped. U+200A is included there, but it's not a
   zero-width character, so I remove it from there.
Signed-off-by: NEgmont Koblinger <egmont@uhulinux.hu>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead
Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes two things in module_init.

- fix register_chrdev() error check

  Currently dtlk doesn't check register_chrdev() failure correctly.
  register_chrdev() returns a errno on failure.

- check probe failure

  dtlk ignores probe failure and allows the module loading without
  such device. I got "Trying to free nonexistent resource" message
  by release_region() when unloading module without device.

[akpm@linux-foundation.org: fix error code return]
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Chris Pallotta <chris@allmedia.com>
Cc: Jim Van Zandt <jrv@vanzandt.mv.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  linux/module.h
  -> linux/elf.h
     -> asm-i386/elf.h
        -> linux/utsname.h
           -> linux/sched.h

Noticeably cut the number of files which are rebuild upon touching sched.h
and cut down pulled junk from every module.h inclusion.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ROUND_UP macro cleanup use DIV_ROUND_UP
Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of having /dev/port support dependent in multiple places on a
string of preprocessor symbols, define a new configuration directive for
it.  This ensures that all four places remain consistent with each other.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>