'safemode' relates to marking an array as 'clean' if there has been no write
traffic for a while (a couple of seconds), to reduce the chance of the array
being found dirty on reboot.

->safemode is set to '1' when there have been no write for a while, and it
gets set to '0' when the superblock is updates with the 'clean' flag set.

This requires a few fixes for 'external' metadata:
 - When an array is set to 'clean' via sysfs, 'safemode' must be cleared.
 - when we write to an array that has 'safemode' set (there must have been
        some delay in updating the metadata), we need to clear safemode.
 - Don't try to update external metadata in md_check_recovery for safemode
        transitions - it won't work.

Also, don't try to support "immediate safe mode" (safemode==2) for external
metadata, it cannot really work (the safemode timeout can be set very low if
this is really needed).
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I keep finding problems where an mddev gets reused and some fields has a value
from a previous usage that confuses the new usage.  So clear all fields that
could possible need clearing when calling do_md_stop.

Also initialise the 'level' of a new array to LEVEL_NONE (which isn't 0).
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All the metadata update processing for external metadata is on in user-space
or through the sysfs interfaces, so make "md_update_sb" a no-op in that case.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rdev->mddev is no longer valid upon return from entry->store() when the
'remove' command is given.

Cc: <stable@kernel.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

FB_PXA_SMARTPANEL defaults to "n" and removed the cast to void *.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NEric Miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

the new_regs stuff has been removed, and all the setup (modification to those
fbi->reg_*) is protected with IRQ disabled

   * disable IRQ is too heavy here, provided that no IRQ context will
     touch the fbi->reg_* and the only possible contending place is
     in the CPUFREQ_POSTCHANGE (task context), a mutex will be better,
     leave this for future improvement
Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

using __raw_{read,write}l() everywhere looks messy, introduce
lcd_{read,write}l() to get this cleaned up a bit
Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reasons:

  1. straight forward: the name "LCD_COLOR_DSTN_16BPP" is much better
     than "LCCR0_Pas | LCCR0_Color | LCCR0_Dual"

  2. by defining LCD connection types as constants, it allows only
     valid possibilities

  3. by removing the dependency of register bits definitions, those
     can be later moved into the body of pxafb.c, instead of having
     a regs-lcd.h around

Currently, only lubbock, mainstone, zylonite and littleton have been
modified to support these types (see coming patches after this).
Other platforms are encouraged to change their way describing the
LCD controller connections.
Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use structure and array for palette buffer and dma descriptors to:

1. better organize code for future expansion like overlays
2. separate palette and dma descriptors from frame buffer
Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is part of the effort moving peripheral registers outside of pxa-regs.h,
and using ioremap() make it possible the same IP can be re-used on different
processors with different registers space

As a result, the fixed mapping in pxa_map_io() is removed.

The regs-lcd.h can actually moved to where closer to pxafb.c but some of its
bit definitions are directly used by various platform code, though this is not
a good style.
Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So to get a better coding style and centralize the pxafb parameters
handling code.
Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pxafb_parse_options() has very long lines exceeding far beyond 80 characters,
which makes the function looks bad.  Un-nest it into smaller functions and use
a temporary string for only what has been overridden instead of the whole
dev_info() message to reduce the line a bit more.
Signed-off-by: Neric miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make the baud rate divisor calculation code a bit more readable and add a
few comments.

Also fix wrong debug information being displayed when !new_1 and
max_speed_hz == 0.

[david-b@pacbell.net: fix it]
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: "Janesh Ramakrishnan" <jramakrishnan@neuropace.com>
Acked-by David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pointed out by Paulo:
  "When I wrote this initially, it was a mistake to add a Changelog in
   the first place, but I didn't know better at the time.

   If you're going to make changes to this file, please remove all the
   Changelog, instead of adding more entries to it.  The 'Changelog'
   should be kept by the version control system, and not the source code
   itself."

Cc: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Acked-by: NPaulo Marques <pmarques@grupopie.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

on memoryless node, /proc/pagetypeinfo is displayed slightly funny output.
this patch fix it.

output example (header is outputed, but no data is outputed)
--------------------------------------------------------------
Page block order: 14
Pages per block:  16384

Free pages count per migrate type at order       0      1      2      3      4      5    \
  6      7      8      9     10     11     12     13     14     15     16

Number of blocks type     Unmovable  Reclaimable      Movable      Reserve      Isolate
Page block order: 14
Pages per block:  16384

Free pages count per migrate type at order       0      1      2      3      4      5    \
  6      7      8      9     10     11     12     13     14     15     16
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Seems we have various confused entries around S and T.  Sort them all out and
also add myself as tty maintainer (which is how I noticed it).
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Noted-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDave Chinner <dgc@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't refer to file that no longer exists:
docproc: linux-2.6.25-git14/arch/powerpc/kernel/rio.c: No such file or directory
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (7798): tuners/Kconfig: Change config name and help to reflect dynamic load for tuners
  V4L/DVB (7794): cx88: Fix a warning
  V4L/DVB (7792): ivtv: correct misspelled "HIMEM4G" to "HIGHMEM4G" in error message
  V4L/DVB (7791): ivtv: POLLHUP must be returned on eof
  V4L/DVB (7789b): Fix merge conflicts

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (48 commits)
  ext4: fix hot spins in mballoc after err_freebuddy and err_freemeta
  ext4: fix test ext_generic_write_end() copied return value
  ext3: fix test ext_generic_write_end() copied return value
  ext4: Move mballoc headers/structures to a seperate header file mballoc.h
  ext4: cleanup for compiling mballoc with verification and debugging #defines
  ext4: don't use ext4_error in ext4_check_descriptors
  ext4: mark inode dirty after initializing the extent tree
  ext4: update ctime and mtime for truncate with extents.
  ext4: Don't do GFP_NOFS allocations after taking ext4_lock_group
  ext4: move headers out of include/linux
  ext4: fix wrong gfp type under transaction
  ext4: Fix hang on umount with quotas when journal is aborted
  ext4: Fix update of mtime and ctime on rename
  jdb2: replace remaining __FUNCTION__ occurrences
  ext4: replace remaining __FUNCTION__ occurrences
  jbd2: only create debugfs and stats entries if init is successful
  jbd2: fix kernel-doc notation
  jbd2: replace potentially false assertion with if block
  jbd2: eliminate duplicated code in revocation table init/destroy functions
  jbd2: tidy up revoke cache initialisation and destruction
  ...

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (24 commits)
  [XFS] Fix build failure after enabling CONFIG_XFS_DEBUG
  [XFS] remove dmapi cruft in xfs_file.c
  [XFS] remove sendfile leftovers
  [XFS] allow enabling CONFIG_XFS_DEBUG
  [XFS] Don't initialise new inode generation numbers to zero
  [XFS] Fix check for block zero access in xfs_write_iomap_allocate()
  [XFS] Don't double count reserved block changes on UP.
  [XFS] remove xfs_log_ticket_zone on rmmod
  [XFS] fix non-smp xfs build
  [XFS] Fix broken HAVE_SPLICE removal commit.
  [XFS] kill XFS_ICSB_SB_LOCKED
  [XFS] split xfs_icsb_balance_counter
  [XFS] Add xfs_icsb_sync_counters_locked for when m_sb_lock already held
  [XFS] Cleanup xfs_attr a bit with xfs_name and remove cred
  [XFS] kill usesless IHOLD calls in xfs_remove and xfs_rmdir
  [XFS] kill parent == child checks in xfs_remove and xfs_rmdir
  [XFS] kill usesless IHOLD calls in xfs_rename
  [XFS] remove manual lookup from xfs_rename and simplify locking
  [XFS] shrink mrlock_t
  [XFS] simplify xfs_lookup
  ...

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/cx88/cx88-i2c.c: In function 'attach_inform':
drivers/media/video/cx88/cx88-i2c.c:102: warning: unused variable 'tun_setup'
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Commit c3c52bce ("edac: fix module
initialization on several modules 2nd time") added a call to opstate_init
but did not include linux/edac.h that declares it.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some Kconfig names were changed. This patch reapplies the rename script,
fixing for those drivers merged after the patch that renamed those
items.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

In ext4_mb_init_backend() 'i' is of type ext4_group_t. Since unsigned, i
>= 0 is always true, so fix hot spins after err_freebuddy: and -meta:
and prevent decrements when zero.
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

'copied' is unsigned, whereas 'ret2' is not. The test (copied < 0) fails
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

'copied' is unsigned, whereas 'ret2' is not. The test (copied < 0) fails
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Move function and structure definiations out of mballoc.c and put it under
a new header file mballoc.h
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch allows compiling mballoc with:
#define AGGRESSIVE_CHECK
#define DOUBLE_CHECK
#define MB_DEBUG

It fixes:
Compilation errors:
fs/ext4/mballoc.c: In function '__mb_check_buddy':
fs/ext4/mballoc.c:605: error: 'struct ext4_prealloc_space' has no member named 'group_list'
fs/ext4/mballoc.c:606: error: 'struct ext4_prealloc_space' has no member named 'pstart'
fs/ext4/mballoc.c:608: error: 'struct ext4_prealloc_space' has no member named 'len'

Compilation warnings:
fs/ext4/mballoc.c: In function 'ext4_mb_normalize_group_request':
fs/ext4/mballoc.c:2863: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int'
fs/ext4/mballoc.c: In function 'ext4_mb_use_inode_pa':
fs/ext4/mballoc.c:3103: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int'

Sparse check:
fs/ext4/mballoc.c:3818:2: warning: context imbalance in 'ext4_mb_show_ac' - different lock contexts for basic block
Signed-off-by: NSolofo Ramangalahy <Solofo.Ramangalahy@bull.net>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Because ext4_check_descriptors is called at mount time you can't use ext4_error
as it calls ext4_commit_sb, which since the sb isn't all the way initialized
causes bad things to happen (ie a panic).  This patch changes the ext4_error's
to printk's to keep this problem from happening.  Thanks much,
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Signed-off-by: NMingming Cao <cmm@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We should mark the inode dirty only after initializing the extent
tree.  Also if we fail during extent initialization we need
to call DQUOT_FREE_INODE.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>