This replaces the old SH RTC driver, and allows us to
clean quite a lot of things up on the board-specific
side.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add support for the I2C-attached Intersil ISL1208 RTC chip.

[akpm@osdl.org: cleanups, fixlets]
Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a renamed and tested version of the previous S3C24XX RTC class
driver.

The driver has been renamed from the original s3c2410-rtc, which is now too
narrow for the range of devices supported.

The rtc-s3c has been chosen as there is the distinct possibility of this
driver being carried forward into newer Samsung SoC silicon.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add an SPI driver for the Ricoh RS5C348 RTC chip.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add an RTC driver for the Dallas DS1742 RTC chip.

[akpm@osdl.org: cleanups, compile fix]
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add an RTC driver for the Dallas DS1553 RTC chip.

[akpm@osdl.org: cleanups, compile fix]
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Adds support for the RTC integrated in the Atmel AT91RM9200 SoC.

Driver was originally written for 2.4 by Rick Bronson.  Then converted to
2.6 ARM RTC API by Steven Scholz.  Now converted to the RTC class model.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for the v3020 RTC from EM Microelectronic.

The v3020 RTC is designed to be connected on a bus using only one data bit.
 Since any data bit may be used, it is necessary to specify this to the
driver by passing a struct v3020_platform_data pointer (see
include/linux/rtc-v3020.h) to the driver.

Part of the following code comes from the kernel patchs produced by
Compulab for their products.  The original file (available here:
http://raph.people.8d.com/misc/emv3020.c) was released under the terms of
the GPL license.

[akpm@osdl.org: cleanups]
Signed-off-by: NRaphael Assenat <raph@raphnet.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the MAX6902 SPI RTC chip.  Tested on a pxa2xx cpu.

The compulab code comes from the kernel patch the produce for their
cn-x255 board. (inside a zip file on the
http://www.compulab.co.il/x255/html/x255-developer.htm)

The original file (drivers/char/max6902.c) was GPL, which is of course
an appropriate licence:

/*
 * max6902.c
 *
 * Driver for MAX6902 RTC
 *
 * Copyright (C) 2004 Compulab Ltd.
 *
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 *
 */

For reference, you can get the original file here:
http://raph.people.8d.com/misc/max6902.c

[akpm@osdl.org: cleanups]
Signed-off-by: NRaphael Assenat <raph@raphnet.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A port of the driver for the pcf8583 i2c rtc controller to the generic RTC
framework by Alessandro Zummo.  Based on
drivers/acorn/char/{pcf8583.[hc],i2c.c}.  Hopefully, acorn can be converted
too to use this driver in the future.
Signed-off-by: NG. Liakhovetski <gl@dsa-ac.de>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is an "RTC-framework" driver for DS1307 and similar RTC chips,

It should be a full replacement for the existing ds1337.c driver (using the
older RTC glue), giving a net increase in the number of RTC chips that work
out-of-the-box.  There's a whole cluster of RTCs that are very similar, but
the 1337 driver was a bit too picky to work with most of them.

Still no support for RTC alarm IRQs (on chips that support them).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a driver for the ARM PL031 RTC found on some ARM SOCs.  The driver is
fairly trivial as the RTC only provides a read/write and alarm capability.

[akpm@osdl.org: compile fix]
Signed-off-by: NDeepak <dsaxena@plexity.net>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch updates VR4100 series RTC driver.

* This driver supports new RTC subsystem.
* Simple set time/read time test worked fine.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a driver for the ST M48T86 / Dallas DS12887 RTC.

This is a platform driver.  The platform device must provide I/O routines to
access the RTC.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add an RTC subsystem driver for the ARM SA1100/PXA2XX processor RTC.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a driver for the RTC embedded in the Cirrus Logic EP93XX
family of processors.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

RTC class aware driver for the Ricoh RS5C372 chip used, among others, on the
Synology DS101.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An RTC class aware driver for the Philips PCF8563 RTC and Epson RTC8564 chips.

This chip is used on the Iomega NAS100D.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Driver for the Dallas/Maxim DS1672 chip, found on the Loft
(http://www.giantshoulderinc.com).
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Interrupts can be generated by

echo "alarm|tick|update" >/sys/class/rtc/rtcX/device/irq
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A port of the existing x1205 driver under the new RTC subsystem.

It is actually under test within the NSLU2 project
(http://www.nslu2-linux.org) and it is working quite well.

It is the first driver under this new subsystem and should be used as a guide
to port other drivers.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the dev interface to the RTC subsystem.

Each RTC will be available under /dev/rtcX .  A symlink from /dev/rtc0 to
/dev/rtc cab be obtained with the following udev rule:

KERNEL=="rtc0", SYMLINK+="rtc"
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the proc interface to the RTC subsystem.

The first RTC driver which registers with the class will be accessible by
/proc/driver/rtc .

This is required for compatibility with the standard RTC driver and to avoid
breaking any user space application which may erroneusly rely on this.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds the sysfs interface to the RTC subsystem.

Each RTC client will have his own entry under /sys/classs/rtc/rtcN .

Within this entry some attributes are exported by the subsystem, like date and
time.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the basic RTC subsystem infrastructure to the kernel.

rtc/class.c - registration facilities for RTC drivers
rtc/interface.c - kernel/rtc interface functions
rtc/hctosys.c - snippet of code that copies hw clock to sw clock
		at bootup, if configured to do so.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

RTC and date/time related functions.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>