* Update struct mlx5_wqe_umr_ctrl_seg.
* Currenlty UMR send_flags aim only certain use cases: enabled/disable
  cached MR, modifying XLT for ODP. By making flags independent make UMR
  more flexible allowing arbitrary manipulations.
* Since different UMR formats have different entry sizes UMR request
  should receive exact size of translation table update instead of
  number of entries. Rename field npages to xlt_size in struct mlx5_umr_wr
  and update relevant code accordingly.
* Add support of length64 bit.
Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Add MODIFY_QP_EX CMD to extend modify_qp.
- Rate limit will be updated in the following state transactions: RTR2RTS,
  RTS2RTS. The limit will be removed when SQ is in RST and ERR state.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The fast_registration length is used to convey length for memory
registrations through UMR which can be of any size up to 2^64.

Change the length type to be u64.

Fixes: 968e78dd ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add struct ib_udata to the signature of create_ah callback that is
implemented by IB device drivers. This allows HW drivers to return extra
data to the userspace library.
This patch prepares the ground for mlx5 driver to resolve destination
mac address for a given GID and return it to userspace.
This patch was previously submitted by Knut Omang as a part of the
patch set to support Oracle's Infiniband HCA (SIF).
Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The maximum page size in the mkey context is 2GB.

Until today, we didn't enforce this requirement in the code,
and therefore, if we got a page size larger than 2GB, we
have passed zeros in the log_page_shift instead of the actual value
and the registration failed.

This patch limits the driver to use compound pages of 2GB for mkeys.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When calling reg_mr of large MRs (e.g. 4GB) from multiple processes
and MR caches can't supply the required amount of MRs the slow-path
of MR allocation may be used. In this case we need to serialize the
slow-path between the processes to avoid soft lock.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NMoshe Lazer <moshel@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently when calling mlx5_add_flow_rule we accept
only one flow destination, this commit allows to pass
multiple destinations.

This change forces us to change the return structure to a more
flexible one. We introduce a flow handle (struct mlx5_flow_handle),
it holds internally the number for rules created and holds an array
where each cell points the to a flow rule.

From the consumers (of mlx5_add_flow_rule) point of view this
change is only cosmetic and requires only to change the type
of the returned value they store.

From the core point of view, we now need to use a loop when
allocating and deleting rules (e.g given to us a flow handler).
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

This patch decouples and moves vendors specific structures to
common UAPI folder which will be visible to all consumers.

These structures are used by user-space library driver
(libmlx5) and currently manually copied to that library.

This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When LAG is active, QP tx affinity (the physical port
to which a QP is affined, or the TIS in case of raw-eth)
is set in a round robin fashion during state transition
from RESET to INIT.
Signed-off-by: NAviv Heller <avivh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This is done in two steps:
1) Issuing CREATE_VPORT_LAG in order to have Ethernet traffic from
both ports arriving on PF0 root flowtable, so we will be able to catch
all raw-eth traffic on PF0.
2) Creation of LAG demux flowtable in order to direct all non-raw-eth
traffic back to its source port, assuring that normal Ethernet
traffic "jumps" to the root flowtable of its RX port (non-LAG behavior).
Signed-off-by: NAviv Heller <avivh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Track asynchronous events on a receive work queue by using the
mlx5_core_create_rq_tracked API.

In case a fatal error has occurred letting the IB layer know about by
using the ib_wq event handler.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support to create sniffer rule. This rule receive all
incoming and outgoing packets from the port.
A user could create such rule by using IB_FLOW_ATTR_SNIFFER type.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Saving the flow table priority object's pointer in the flow handle
is necessary for downstream patches since the sniffer flow table isn't
placed at the standard flow_db structure but in a different database.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use TIR number based on selector, it should be done to differentiate
between RSS QP to RAW one.
Reported-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Tested-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove old representation of manually created MKey/PSV commands layout,
and use mlx5_ifc canonical structures and defines.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

In order to support statistics for ports, we attach
each QP to a counter set which is dedicate to this port.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The driver exposes interfaces that directly relate to HW state.
Upon fatal error, consumers of these interfaces (ULPs) that rely
on completion of all their posted work-request could hang, thereby
introducing dependencies in shutdown order. To prevent this from
happening, we manage the relevant resources (CQs, QPs) that are used
by the device. Upon a fatal error, we now generate simulated
completions for outstanding WQEs that were not completed at the
time the HW was reset.

It includes invoking the completion event handler for all involved
CQs so that the ULPs will poll those CQs. When polled we return
simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs
to clean up their  resources and not wait forever for completions
upon receiving remove_one.

The above change requires an extra check in the data path to make
sure that when device is in error state, the simulated CQEs will
be returned and no further WQEs will be posted.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Implements the IB core disassociate_ucontext API.
The driver detaches the HW resources for a given user context to
prevent a dependency between application termination and device
disconnect. This is done by managing the VMAs that were mapped
to the HW bars such as doorbell and blueflame. When need to detach,
remap them to an arbitrary kernel page returned by the zap API.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for Raw Ethernet RX HASH QP. Currently, creation and
destruction of such a QP are supported. This QP is implemented as
a simple TIR object which points to the receive RQ indirection table.
The given hashing configuration is used to configure the TIR and by
that it chooses the right RQ from the RQ indirection table.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some mlx5 based hardwares support a RQ table object. This RQ table
points to a few RQ objects. We implement the receive work queue
indirection table API (create and destroy) by using this hardware
object.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

A QP can be created without internal WQs "packaged" inside it,
this QP can be configured to use "external" WQ object as its
receive/send queue.

WQ is a necessary component for RSS technology since RSS mechanism
is supposed to distribute the traffic between multiple
Receive Work Queues

Receive WQs are implemented by RQs.

Implement the WQ creation, modification and destruction verbs.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enable Scatter FCS in the RQ context when the user passes
Scatter FCS create flag.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

By this patch, the user space library will be able to improve
performance using appropriate ringing DoorBell method according to the
memory type it asked for.

Currently only one mapping command is allowed for UARs:
MLX5_IB_MMAP_REGULAR_PAGE. Using this mapping, the kernel maps the
UARs to write-combining (WC) if the system supports it.
If the system is not supporting WC the UARs are mapped to
non-cached(NC). In this case the user space library can't tell which
mapping is applied.
This patch adds 2 new mapping commands: MLX5_IB_MMAP_WC_PAGE and
MLX5_IB_MMAP_NC_PAGE. For these commands the kernel maps exactly as
requested and fails if it can't.

Since there is no generic way to check if the requested memory region
can be mapped as WC, driver enables conclusive WC mapping only for
x86, PowerPC and ARM which support WC for the device's memory region.
Signed-off-by: NGuy Levy <guyle@mellanox.com>
Signed-off-by: NMoshe Lazer <moshel@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The SRP initiator allows to set max_sectors to a value that exceeds
the largest amount of data that can be mapped at once with an mlx4
HCA using fast registration and a page size of 4 KB. Hence modify
ib_map_mr_sg() such that it can map partial sg-elements. If an
sg-element has been mapped partially, let the caller know
which fraction has been mapped by adjusting *sg_offset.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Tested-by: NLaurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The previous patch that added a couple of callback functions put
the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING,
which causes the build to fail if that option is disabled:

drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add':
drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function)

This moves the four declarations below the #ifdef section so they
are always available.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: eff901d3 ("IB/mlx5: Implement callbacks for manipulating VFs")
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Implement the IB defined callbacks used to manipulate the policy for the
link state, set GUIDs or get statistics information. This functionality
is added into a new file that will be used to add any SRIOV related
functionality to the mlx5 IB layer.

The following callbacks have been added:

mlx5_ib_get_vf_config
mlx5_ib_set_vf_link_state
mlx5_ib_get_vf_stats
mlx5_ib_set_vf_guid

In addition, publish whether this device is based on a virtual function.

In mlx5 supported devices, virtual functions are implemented as vHCAs.
vHCAs have their own QP number space so it is possible that two vHCAs
will use a QP with the same number at the same time.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Each bypass flow steering priority will be split into two priorities:
1. Priority for don't trap rules.
2. Priority for normal rules.

When user creates a flow using IB_FLOW_ATTR_FLAGS_DONT_TRAP flag, the
driver creates two flow rules, one used for receiving the traffic and
the other one for forwarding the packet to continue matching in lower
or equal priorities.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allocate proper context for arbitrary scatterlist registration
If ib_alloc_mr is called with IB_MR_MAP_ARB_SG, the driver
allocate a private klm list instead of a private page list.
Set the UMR wqe correctly when posting the fast registration.

Also, expose device cap IB_DEVICE_MAP_ARB_SG according to the
device id (until we have a FW bit that correctly exposes it).
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Simplifies the code, and makes it more fair vs other users by using a
softirq for polling.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHaggai Eran <haggaie@mellanox.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds user-space support for memory windows allocation and
deallocation. It also exposes the supported types via
query_device_caps verb.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Tested-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Mlx5's mkey mechanism is also used for memory windows.
The current code base uses MR (memory region) naming, which is
inaccurate. Changing MR to mkey in order to represent its different
usages more accurately.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds support for re-registration of memory regions in MLX5.
The functionality is basically the same as deregister followed by
register, but attempts to reuse the existing resources as much as
possible.
Original memory keys are kept if possible, saving the need to
communicate new ones to remote peers.
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The GSI QP emulation requires also emulating completions for transmitted
MADs. The CQ on which these completions are generated can also be used by
the hardware, and the MAD layer is free to use any CQ of the device for the
GSI QP.

Add a method for generating software completions to each mlx5 CQ. Software
completions are polled first, and generate calls to the completion handler
callback if necessary.
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Whenever the P_Key table is changed, we create the required GSI
transmission QPs on-demand.
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

mlx5 creates special GSI QPs that has limited ability to control the P_Key
of transmitted packets. The sent P_Key is taken from the QP object,
similarly to what happens with regular UD QPs.

Create a software wrapper around GSI QPs that with the following patches
will be able to emulate the functionality of a GSI QP including control of
the P_Key per work request.
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to create multiple GSI QPs, we need to set the source QP number to
one on all these QPs. Add the necessary definitions and infrastructure to
do that.
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support LSO and CSUM in the TX flow the driver does the
following:
* LSO bit for the enum mlx5_ib_qp_flags was added, indicates QP that
  supports LSO offloads.
* Enables the special offload when the QP is created, and enable the
  special work request id (IB_WR_LSO) when comes.
* Calculates the size of the WQE according to the new WQE format that
  support these offloads.
* Handles the new WQE format when arrived, sets the relevant
  fields, and copies the needed data.
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The create_cq() can receive creation flags which were used
differently by two commits which added create_cq extended
command and cross-channel. The merged code caused to not
accept any flags at all.

This patch unifies the check into one function and one return
error code.

Fixes: 972ecb82 ("IB/mlx5: Add create_cq extended command")
Fixes: 051f2630 ("IB/mlx5: Add driver cross-channel support")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds support for Raw Packet QP for the mlx5 device.

Raw Packet QP, unlike other QP types, has no matching mlx5_core_qp
object but rather it is built of RQ/SQ/TIR/TIS/TD mlx5_core object.

Since the SQ and RQ work-queue (WQ) buffers are not contiguous like
other QPs, we allocate separate buffers in the user-space and pass
the address of each one of them separately to the kernel.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>