Avoid unnecessary msgpool.  Preallocate reply.  Fix use-after-free race.
Signed-off-by: NSage Weil <sage@newdream.net>

This would only trigger if we bailed out before resetting r_con_filling_msg
because the server reply was corrupt (oversized).
Signed-off-by: NSage Weil <sage@newdream.net>

"xattr" is never NULL here.  We took care of that in the previous
if statement block.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Signed-off-by: NSage Weil <sage@newdream.net>

Following Nick Piggin patches in btrfs, pagecache pages should be
allocated with __page_cache_alloc, so they obey pagecache memory
policies.

Also, using add_to_page_cache_lru instead of using a private
pagevec where applicable.
Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: NSage Weil <sage@newdream.net>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NSage Weil <sage@newdream.net>

Drop largely useless helper __prepare_pages(), and simplify sanity checks.
Signed-off-by: NSage Weil <sage@newdream.net>

If we abort a request, we return to caller, but the request may still
complete.  And if we hold the dir FILE_EXCL bit, we may not release a
lease when sending a request.  A simple un-tar, control-c, un-tar again
will reproduce the bug (manifested as a 'Cannot open: File exists').

Ensure we invalidate affected dentry leases (as well dir I_COMPLETE) so
we don't have valid (but incorrect) leases.  Do the same, consistently, at
other sites where I_COMPLETE is similarly cleared.
Signed-off-by: NSage Weil <sage@newdream.net>

When we abort requests we need to prevent fill_trace et al from doing
anything that relies on locks held by the VFS caller.  This fixes a race
between the reply handler and the abort code, ensuring that continue
holding the dir mutex until the reply handler completes.
Signed-off-by: NSage Weil <sage@newdream.net>

We would occasionally BUG out in the reply handler because r_reply was
nonzero, due to a race with ceph_mdsc_do_request temporarily setting
r_reply to an ERR_PTR value.  This is unnecessary, messy, and also wrong
in the EIO case.

Clean up by consistently using r_err for errors and r_reply for messages.
Also fix the abort logic to trigger consistently for all errors that return
to the caller early (e.g., EIO from timeout case).  If an abort races with
a reply, use the result from the reply.

Also fix locking for r_err, r_reply update in the reply handler.
Signed-off-by: NSage Weil <sage@newdream.net>

The existing code would have allowed you to clone a file that was
only open for writing
Signed-off-by: NChris Mason <chris.mason@oracle.com>

I spotted the missing kfree() while removing the BKL.

[akpm@linux-foundation.org: avoid multiple returns so it doesn't happen again]
Signed-off-by: NJan Blunck <jblunck@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

I moved the dir_put_page() inside the if condition so we don't dereference
"page", if it's an ERR_PTR().
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

iput() is needed *until* we'd done successful d_alloc_root()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

1) i_flags simply doesn't work for mount/unlink race prevention;
we may have many links to file and rm on one of those obviously
shouldn't prevent bind on top of another later on.  To fix it
right way we need to mark _dentry_ as unsuitable for mounting
upon; new flag (DCACHE_CANT_MOUNT) is protected by d_flags and
i_mutex on the inode in question.  Set it (with dont_mount(dentry))
in unlink/rmdir/etc., check (with cant_mount(dentry)) in places
in namespace.c that used to check for S_DEAD.  Setting S_DEAD
is still needed in places where we used to set it (for directories
getting killed), since we rely on it for readdir/rmdir race
prevention.

2) rename()/mount() protection has another bogosity - we unhash
the target before we'd checked that it's not a mountpoint.  Fixed.

3) ancient bogosity in pivot_root() - we locked i_mutex on the
right directory, but checked S_DEAD on the different (and wrong)
one.  Noticed and fixed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

inotify_new_group() receives a get_uid-ed user_struct and saves the
reference on group->inotify_data.user.  The problem is that free_uid() is
never called on it.

Issue seem to be introduced by 63c882a0 (inotify: reimplement inotify
using fsnotify) after 2.6.30.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Eric Paris <eparis@parisplace.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Paris <eparis@redhat.com>

There is a race in the inotify add/rm watch code.  A task can find and
remove a mark which doesn't have all of it's references.  This can
result in a use after free/double free situation.

Task A					Task B
------------				-----------
inotify_new_watch()
 allocate a mark (refcnt == 1)
 add it to the idr
					inotify_rm_watch()
					 inotify_remove_from_idr()
					  fsnotify_put_mark()
					      refcnt hits 0, free
 take reference because we are on idr
 [at this point it is a use after free]
 [time goes on]
 refcnt may hit 0 again, double free

The fix is to take the reference BEFORE the object can be found in the
idr.
Signed-off-by: NEric Paris <eparis@redhat.com>
Cc: <stable@kernel.org>

inotify_add_watch explictly frees the unused inode mark, but it can just
use the generic code.  Just do that.
Signed-off-by: NEric Paris <eparis@redhat.com>

According to specification

	mkdir d; ln -s d a; open("a/", O_NOFOLLOW | O_RDONLY)

should return success but currently it returns ELOOP.  This is a
regression caused by path lookup cleanup patch series.

Fix the code to ignore O_NOFOLLOW in case the provided path has trailing
slashes.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: NMarius Tolzmann <tolzmann@molgen.mpg.de>
Acked-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cachefiles_determine_cache_security() is expected to return with a
security override in place.  However, if set_create_files_as() fails, we
fail to do this.  In this case, we should just reinstate the security
override that was set by the caller.

Furthermore, if set_create_files_as() fails, we should dispose of the
new credentials we were in the process of creating.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix:

fs/built-in.o: In function `sys_inotify_init1':
summary.c:(.text+0x347a4): undefined reference to `anon_inode_getfd'

found by kautobuild with arms bcmring_defconfig, which ends up with
INOTIFY_USER enabled (through the 'default y') but leaves ANON_INODES
unset.  However, inotify_user.c uses anon_inode_getfd().
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NEric Paris <eparis@redhat.com>

If the tcp connection drops and we reconnect to reestablish a stateful
session (with the mds), we need to resend previously sent (and possibly
received) messages with the _same_ seq # so that they can be dropped on
the other end if needed.  Only assign a new seq once after the message is
queued.
Signed-off-by: NSage Weil <sage@newdream.net>

The iterate_session_caps helper traverses the session caps list and tries
to grab an inode reference.  However, the __ceph_remove_cap was clearing
the inode backpointer _before_ removing itself from the session list,
causing a null pointer dereference.

Clear cap->ci under protection of s_cap_lock to avoid the race, and to
tightly couple the list and backpointer state.  Use a local flag to
indicate whether we are releasing the cap, as cap->session may be modified
by a racing thread in iterate_session_caps.
Signed-off-by: NSage Weil <sage@newdream.net>

Originally, commit d899bf7b ("procfs: provide stack information for
threads") attempted to introduce a new feature for showing where the
threadstack was located and how many pages are being utilized by the
stack.

Commit c44972f1 ("procfs: disable per-task stack usage on NOMMU") was
applied to fix the NO_MMU case.

Commit 89240ba0 ("x86, fs: Fix x86 procfs stack information for threads on
64-bit") was applied to fix a bug in ia32 executables being loaded.

Commit 9ebd4eba ("procfs: fix /proc/<pid>/stat stack pointer for kernel
threads") was applied to fix a bug which had kernel threads printing a
userland stack address.

Commit 1306d603 ('proc: partially revert "procfs: provide stack
information for threads"') was then applied to revert the stack pages
being used to solve a significant performance regression.

This patch nearly undoes the effect of all these patches.

The reason for reverting these is it provides an unusable value in
field 28.  For x86_64, a fork will result in the task->stack_start
value being updated to the current user top of stack and not the stack
start address.  This unpredictability of the stack_start value makes
it worthless.  That includes the intended use of showing how much stack
space a thread has.

Other architectures will get different values.  As an example, ia64
gets 0.  The do_fork() and copy_process() functions appear to treat the
stack_start and stack_size parameters as architecture specific.

I only partially reverted c44972f1 ("procfs: disable per-task stack usage
on NOMMU") .  If I had completely reverted it, I would have had to change
mm/Makefile only build pagewalk.o when CONFIG_PROC_PAGE_MONITOR is
configured.  Since I could not test the builds without significant effort,
I decided to not change mm/Makefile.

I only partially reverted 89240ba0 ("x86, fs: Fix x86 procfs stack
information for threads on 64-bit") .  I left the KSTK_ESP() change in
place as that seemed worthwhile.
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We shouldn't leak any prior memory contents to other parties.  And random
data, particularly in the 'version' field, can cause problems down the
line.
Signed-off-by: NSage Weil <sage@newdream.net>

When we made serverino the default, we trusted that the field sent by the
server in the "uniqueid" field was actually unique. It turns out that it
isn't reliably so.

Samba, in particular, will just put the st_ino in the uniqueid field when
unix extensions are enabled. When a share spans multiple filesystems, it's
quite possible that there will be collisions. This is a server bug, but
when the inodes in question are a directory (as is often the case) and
there is a collision with the root inode of the mount, the result is a
kernel panic on umount.

Fix this by checking explicitly for directory inodes with the same
uniqueid. If that is the case, then we can assume that using server inode
numbers will be a problem and that they should be disabled.

Fixes Samba bugzilla 7407
Signed-off-by: NJeff Layton <jlayton@redhat.com>
CC: Stable <stable@kernel.org>
Reviewed-and-Tested-by: NSuresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Fix an occasional EIO returned by a call to vfs_unlink():

	[ 4868.465413] CacheFiles: I/O Error: Unlink failed
	[ 4868.465444] FS-Cache: Cache cachefiles stopped due to I/O error
	[ 4947.320011] CacheFiles: File cache on md3 unregistering
	[ 4947.320041] FS-Cache: Withdrawing cache "mycache"
	[ 5127.348683] FS-Cache: Cache "mycache" added (type cachefiles)
	[ 5127.348716] CacheFiles: File cache on md3 registered
	[ 7076.871081] CacheFiles: I/O Error: Unlink failed
	[ 7076.871130] FS-Cache: Cache cachefiles stopped due to I/O error
	[ 7116.780891] CacheFiles: File cache on md3 unregistering
	[ 7116.780937] FS-Cache: Withdrawing cache "mycache"
	[ 7296.813394] FS-Cache: Cache "mycache" added (type cachefiles)
	[ 7296.813432] CacheFiles: File cache on md3 registered

What happens is this:

 (1) A cached NFS file is seen to have become out of date, so NFS retires the
     object and immediately acquires a new object with the same key.

 (2) Retirement of the old object is done asynchronously - so the lookup/create
     to generate the new object may be done first.

     This can be a problem as the old object and the new object must exist at
     the same point in the backing filesystem (i.e. they must have the same
     pathname).

 (3) The lookup for the new object sees that a backing file already exists,
     checks to see whether it is valid and sees that it isn't.  It then deletes
     that file and creates a new one on disk.

 (4) The retirement phase for the old file is then performed.  It tries to
     delete the dentry it has, but ext4_unlink() returns -EIO because the inode
     attached to that dentry no longer matches the inode number associated with
     the filename in the parent directory.

The trace below shows this quite well.

	[md5sum] ==> __fscache_relinquish_cookie(ffff88002d12fb58{NFS.fh,ffff88002ce62100},1)
	[md5sum] ==> __fscache_acquire_cookie({NFS.server},{NFS.fh},ffff88002ce62100)

NFS has retired the old cookie and asked for a new one.

	[kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_ACTIVE,24})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_DYING]
	[kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_INIT,0})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_LOOKING_UP]
	[kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_DYING,24})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_RECYCLING]

The old object (OBJ52) is going through the terminal states to get rid of it,
whilst the new object - (OBJ53) - is coming into being.

	[kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_LOOKING_UP,0})
	[kslowd] ==> cachefiles_walk_to_object({ffff88003029d8b8},OBJ53,@68,)
	[kslowd] lookup '@68'
	[kslowd] next -> ffff88002ce41bd0 positive
	[kslowd] advance
	[kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA'
	[kslowd] next -> ffff8800369faac8 positive

The new object has looked up the subdir in which the file would be in (getting
dentry ffff88002ce41bd0) and then looked up the file itself (getting dentry
ffff8800369faac8).

	[kslowd] validate 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA'
	[kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA')
	[kslowd] remove ffff8800369faac8 from ffff88002ce41bd0
	[kslowd] unlink stale object
	[kslowd] <== cachefiles_bury_object() = 0

It then checks the file's xattrs to see if it's valid.  NFS says that the
auxiliary data indicate the file is out of date (obvious to us - that's why NFS
ditched the old version and got a new one).  CacheFiles then deletes the old
file (dentry ffff8800369faac8).

	[kslowd] redo lookup
	[kslowd] lookup 'Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA'
	[kslowd] next -> ffff88002cd94288 negative
	[kslowd] create -> ffff88002cd94288{ffff88002cdaf238{ino=148247}}

CacheFiles then redoes the lookup and gets a negative result in a new dentry
(ffff88002cd94288) which it then creates a file for.

	[kslowd] ==> cachefiles_mark_object_active(,OBJ53)
	[kslowd] <== cachefiles_mark_object_active() = 0
	[kslowd] === OBTAINED_OBJECT ===
	[kslowd] <== cachefiles_walk_to_object() = 0 [148247]
	[kslowd] <== fscache_object_state_machine() [->OBJECT_AVAILABLE]

The new object is then marked active and the state machine moves to the
available state - at which point NFS can start filling the object.

	[kslowd] ==> fscache_object_state_machine({OBJ52,OBJECT_RECYCLING,20})
	[kslowd] ==> fscache_release_object()
	[kslowd] ==> cachefiles_drop_object({OBJ52,2})
	[kslowd] ==> cachefiles_delete_object(,OBJ52{ffff8800369faac8})

The old object, meanwhile, goes on with being retired.  If allocation occurs
first, cachefiles_delete_object() has to wait for dir->d_inode->i_mutex to
become available before it can continue.

	[kslowd] ==> cachefiles_bury_object(,'@68','Es0g00og0_Nd_XCYe3BOzvXrsBLMlN6aw16M1htaA')
	[kslowd] remove ffff8800369faac8 from ffff88002ce41bd0
	[kslowd] unlink stale object
	EXT4-fs warning (device sda6): ext4_unlink: Inode number mismatch in unlink (148247!=148193)
	CacheFiles: I/O Error: Unlink failed
	FS-Cache: Cache cachefiles stopped due to I/O error

CacheFiles then tries to delete the file for the old object, but the dentry it
has (ffff8800369faac8) no longer points to a valid inode for that directory
entry, and so ext4_unlink() returns -EIO when de->inode does not match i_ino.

	[kslowd] <== cachefiles_bury_object() = -5
	[kslowd] <== cachefiles_delete_object() = -5
	[kslowd] <== fscache_object_state_machine() [->OBJECT_DEAD]
	[kslowd] ==> fscache_object_state_machine({OBJ53,OBJECT_AVAILABLE,0})
	[kslowd] <== fscache_object_state_machine() [->OBJECT_ACTIVE]

(Note that the above trace includes extra information beyond that produced by
the upstream code).

The fix is to note when an object that is being retired has had its object
deleted preemptively by a replacement object that is being created, and to
skip the second removal attempt in such a case.
Reported-by: NGreg M <gregm@servu.net.au>
Reported-by: NMark Moseley <moseleymark@gmail.com>
Reported-by: NRomain DEGEZ <romain.degez@smartjog.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The session->s_waiting list is protected by mdsc->mutex, not s_mutex.  This
was causing (rare) s_waiting list corruption.

Fix errors paths too, while we're here.  A more thorough cleanup of this
function is coming soon.
Signed-off-by: NSage Weil <sage@newdream.net>

OSD requests need to be resubmitted on any pg mapping change, not just when
the pg primary changes.  Resending only when the primary changes results in
occasional 'hung' requests during osd cluster recovery or rebalancing.
Signed-off-by: NSage Weil <sage@newdream.net>

It's possible the MDS will not issue caps on a snapped inode, in which case
an open request may not __ceph_get_fmode(), botching the open file
counting.  (This is actually a server bug, but the client shouldn't BUG out
in this case.)
Signed-off-by: NSage Weil <sage@newdream.net>

The osd request wasn't being unregistered when the osd returned a failure
code, even though the result was returned to the caller.  This would cause
it to eventually time out, and then crash the kernel when it tried to
resend the request using a stale page vector.
Signed-off-by: NSage Weil <sage@newdream.net>

After commit 1f36f774 ("Switch !O_CREAT case to use of do_last()") in
2.6.34-rc1 autofs direct mounts stopped working.  This is caused by
current->link_count being 0 when ->follow_link() is called from
do_filp_open().

I can't work out why this hasn't been seen before Als patch series.

This patch removes the autofs dependence on current->link_count.
Signed-off-by: NIan Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ->writepages writeback_control is not still valid in the writepages
completion.  We were touching it solely to adjust pages_skipped when there
was a writeback error (EIO, ENOSPC, EPERM due to bad osd credentials),
causing an oops in the writeback code shortly thereafter.  Updating
pages_skipped on error isn't correct anyway, so let's just rip out this
(clearly broken) code to pass the wbc to the completion.
Signed-off-by: NSage Weil <sage@newdream.net>

Unregister and destroy the bdi in put_super, after mount is r/o, but before
put_anon_super releases the device name.

For symmetry, bdi_destroy in destroy_client (we bdi_init in create_client).

Only set s_bdi if bdi_register succeeds, since we use it to decide whether
to bdi_unregister.
Signed-off-by: NSage Weil <sage@newdream.net>

gcc warns that a variable is uninitialized.  It's actually handled, but
an early return fools gcc.  Let's just initialize the variable to a
garbage value that will crash if the usage is ever broken.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>

It's useless, since our allocations are already a power of 2.  And it was
allocated per-instance (not globally), which caused a name collision when
we tried to mount a second file system with auth_x enabled.
Signed-off-by: NSage Weil <sage@newdream.net>

The __ variant requires caller to hold i_lock.
Signed-off-by: NSage Weil <sage@newdream.net>

If a rename operation is resent to the MDS following an MDS restart, the
client does not get a full reply (containing the resulting metadata) back.
In that case, a ceph_rename() needs to compensate by doing anything useful
that fill_inode() would have, like d_move().

It also needs to invalidate the dentry (to workaround the vfs_rename_dir()
bug) and clear the dir complete flag, just like fill_trace().
Signed-off-by: NSage Weil <sage@newdream.net>

truncate_inode_pages_range wants the end offset to align with the last byte
in a page.
Signed-off-by: NSage Weil <sage@newdream.net>

We can get old message seq #'s after a tcp reconnect for stateful sessions
(i.e., the MDS).  If we get a higher seq #, that is an error, and we
shouldn't see any bad seq #'s for stateless (mon, osd) connections.
Signed-off-by: NSage Weil <sage@newdream.net>