Fix a seg fault which happens when an input file provided to 'objtool
orc generate' doesn't have a '.shstrtab' section (for instance, object
files produced by clang don't have this section).
Signed-off-by: NSimon Ser <contact@emersion.fr>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/c0f2231683e9bed40fac1f13ce2c33b8389854bc.1514666459.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix a seg fault when no parameter is provided to 'objtool orc'.
Signed-off-by: NSimon Ser <contact@emersion.fr>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/9172803ec7ebb72535bcd0b7f966ae96d515968e.1514666459.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix the following Clang enum conversion warning:

  arch/x86/decode.c:141:20: error: implicit conversion from enumeration
  type 'enum op_src_type' to different enumeration
  type 'enum op_dest_type' [-Werror,-Wenum-conversion]

    op->dest.type = OP_SRC_REG;
		  ~ ^~~~~~~~~~

It just happened to work before because OP_SRC_REG and OP_DEST_REG have
the same value.
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NNicholas Mc Guire <der.herr@hofr.at>
Reviewed-by: NNick Desaulniers <nick.desaulniers@gmail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/b4156c5738bae781c392e7a3691aed4514ebbdf2.1514323568.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that the LDT mapping is in a known area when PAGE_TABLE_ISOLATION is
enabled its a primary target for attacks, if a user space interface fails
to validate a write address correctly. That can never happen, right?

The SDM states:

    If the segment descriptors in the GDT or an LDT are placed in ROM, the
    processor can enter an indefinite loop if software or the processor
    attempts to update (write to) the ROM-based segment descriptors. To
    prevent this problem, set the accessed bits for all segment descriptors
    placed in a ROM. Also, remove operating-system or executive code that
    attempts to modify segment descriptors located in ROM.

So its a valid approach to set the ACCESS bit when setting up the LDT entry
and to map the table RO. Fixup the selftest so it can handle that new mode.

Remove the manual ACCESS bit setter in set_tls_desc() as this is now
pointless. Folded the patch from Peter Ziljstra.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

On program/map show we may get an ID of an object from GETNEXT,
but the object may disappear before we call GET_FD_BY_ID.  If
that happens, ignore the object and continue.

Fixes: 71bb428f ("tools: bpf: add bpftool")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

We can't return from the middle of do_show(), because
json_array will not be closed.  Break out of the loop.
Note that the error handling after the loop depends on
errno, so no need to set err.

Fixes: 831a0aaf ("tools: bpftool: add JSON output for `bpftool map *` commands")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The LDT is inherited across fork() or exec(), but that makes no sense
at all because exec() is supposed to start the process clean.

The reason why this happens is that init_new_context_ldt() is called from
init_new_context() which obviously needs to be called for both fork() and
exec().

It would be surprising if anything relies on that behaviour, so it seems to
be safe to remove that misfeature.

Split the context initialization into two parts. Clear the LDT pointer and
initialize the mutex from the general context init and move the LDT
duplication to arch_dup_mmap() which is only called on fork().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: dan.j.williams@intel.com
Cc: hughd@google.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: linux-mm@kvack.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Makefile has a LLC variable that is initialised to "llc", but can
theoretically be overridden from the command line ("make LLC=llc-6.0").
However, this fails because for LLVM probe check, "llc" is called
directly. Use the $(LLC) variable instead to fix this.

Fixes: 22c88526 ("bpf: improve selftests and add tests for meta pointer")
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Sort the fields returned by specifying '-f help' on the command line.
While at it, simplify the code a bit, indent the output and eliminate an
extra blank line at the beginning.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Do not allow root to convert valid pointers into unknown scalars.
In particular disallow:
 ptr &= reg
 ptr <<= reg
 ptr += ptr
and explicitly allow:
 ptr -= ptr
since pkt_end - pkt == length

1.
This minimizes amount of address leaks root can do.
In the future may need to further tighten the leaks with kptr_restrict.

2.
If program has such pointer math it's likely a user mistake and
when verifier complains about it right away instead of many instructions
later on invalid memory access it's easier for users to fix their progs.

3.
when register holding a pointer cannot change to scalar it allows JITs to
optimize better. Like 32-bit archs could use single register for pointers
instead of a pair required to hold 64-bit scalars.

4.
reduces architecture dependent behavior. Since code:
r1 = r10;
r1 &= 0xff;
if (r1 ...)
will behave differently arm64 vs x64 and offloaded vs native.

A significant chunk of ptr mangling was allowed by
commit f1174f77 ("bpf/verifier: rework value tracking")
yet some of it was allowed even earlier.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

These tests should cover the following cases:

 - MOV with both zero-extended and sign-extended immediates
 - implicit truncation of register contents via ALU32/MOV32
 - implicit 32-bit truncation of ALU32 output
 - oversized register source operand for ALU32 shift
 - right-shift of a number that could be positive or negative
 - map access where adding the operation size to the offset causes signed
   32-bit overflow
 - direct stack access at a ~4GiB offset

Also remove the F_LOAD_WITH_STRICT_ALIGNMENT flag from a bunch of tests
that should fail independent of what flags userspace passes.
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

kernel config fragement CONFIG_NUMA=y is need for reuseport_bpf_numa.
Signed-off-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I'm getting various build failures on sparc64.  The key is
usually that the userland tools get built 32-bit.

1) clock_gettime() is in librt, so that must be added to the link
   libraries.

2) "sizeof(x)" must be printed with "%Z" printf prefix.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

usbip bind writes commands followed by random string when writing to
match_busid attribute in sysfs, caused by using full variable size
instead of string length.
Signed-off-by: NJuan Zea <juan.zea@qindel.com>
Acked-by: NShuah Khan <shuahkh@osg.samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With 720f228e ("bpf: fix broken BPF selftest build") the
inclusion of arch-specific header files changed.  Including the
asm/bpf_perf_event.h on s390, correctly includes the s390 specific
header file.  This header file tries then to include the s390
asm/ptrace.h and the build fails with:

cc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../../include/generated  -I../../../include    test_verifier.c
+/root/git/linux/tools/testing/selftests/bpf/libbpf.a /root/git/linux/tools/testing/selftests/bpf/cgroup_helpers.c -lcap -lelf -o
+/root/git/linux/tools/testing/selftests/bpf/test_verifier
In file included from ../../../include/uapi/asm/bpf_perf_event.h:4:0,
                 from ../../../include/uapi/linux/bpf_perf_event.h:11,
                 from test_verifier.c:29:
../../../include/uapi/../../arch/s390/include/uapi/asm/bpf_perf_event.h:7:9: error: unknown type name 'user_pt_regs'
 typedef user_pt_regs bpf_user_pt_regs_t;
         ^~~~~~~~~~~~
make: *** [../lib.mk:109: /root/git/linux/tools/testing/selftests/bpf/test_verifier] Error 1

This is caused by a recent update to the s390 asm/ptrace.h file
that is not (yet) available in the local installation.  That means,
the s390 asm/ptrace.h must be included from the tools/arch/s390
directory.

Because there is no proper framework to deal with asm specific
includes in tools/, slightly modify the s390 asm/bpf_perf_event.h
to include the local ptrace.h header file.

See also discussion on
https://marc.info/?l=linux-s390&m=151359424420691&w=2

Please note that this needs to be preserved until tools/ is able to
correctly handle asm specific headers.

References: https://marc.info/?l=linux-s390&m=151359424420691&w=2
Fixes: 720f228e ("bpf: fix broken BPF selftest build")
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add a test that i) uses LD_ABS, ii) zeroing R6 before call, iii) calls
a helper that triggers reload of cached skb data, iv) uses LD_ABS again.
It's added for test_bpf in order to do runtime testing after JITing as
well as test_verifier to test that the sequence is allowed.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Two kernel headers got modified recently, which are used by tooling as well:

 tools/include/uapi/linux/kvm.h
 arch/x86/include/asm/cpufeatures.h

None of those changes have an effect on tooling, so do a plain copy.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This fixes the following warning:

  warning: objtool: x86 instruction decoder differs from kernel

Note that there are cleanups queued up for v4.16 that will make this
warning more informative and will make the syncing easier as well.

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Update x86-opcode-map.txt based on the October 2017 Intel SDM publication.
Fix INVPID to INVVPID.
Add UD0 and UD1 instruction opcodes.

Also sync the objtool and perf tooling copies of this file.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

On some linux distributions, the default link of sh is dash which
deoesn't support split array like "${var//,/ }"

It's better to force to use bash shell directly.

Link: http://lkml.kernel.org/r/20171208093751.GA175471@sofiaSigned-off-by: NLiu Changcheng <changcheng.liu@intel.com>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a line for the total number of events and current average at the
bottom of the body.
Note that both values exclude child trace events. I.e. if drilldown is
activated via interactive command 'x', only the totals are accounted, or
we'd be counting these twice (see previous commit "tools/kvm_stat: fix
child trace events accounting").
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unhandled arguments, which could easily include typos, are simply
ignored. We should be strict to avoid undetected typos.
To reproduce start kvm_stat with an extra argument, e.g.
'kvm_stat -d bnuh5ol' and note that this will actually work.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Errors while parsing the '-g' command line argument result in display of
usage information prior to the error message. This is a bit confusing,
as the command line is syntactically correct.
To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive
guest.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Passing an invalid regular expression on the command line results in a
traceback. Note that interactive specification of invalid regular
expressions is not affected
To reproduce, run "kvm_stat -f '*'".
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The man page update for this new functionality was omitted.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Child trace events were included in calculation of the overall total,
which is used for calculation of the percentages of the '%Total' column.
However, the parent trace envents' stats summarize the child trace
events, hence we'd incorrectly account for them twice, leading to
slightly wrong stats.
With this fix, we use the correct total. Consequently, the sum of the
child trace events' '%Total' column values is identical to the
respective value of the respective parent event. However, this also
means that the sum of the '%Total' column values will aggregate to more
than 100 percent.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 67fbcd62 ("tools/kvm_stat: add '-f help' to get the available
event list") added support for '-f help'. However, the extra handling of
'help' will also take effect when 'help' is specified as a regex in
interactive mode via 'f'. This results in display of all events while
only those matching this regex should be shown.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When updating the fields filter, tracepoint events of fields previously
not visible were not enabled, as TracepointProvider.update_fields()
updated the member variable directly instead of using the setter, which
triggers the event enable/disable.
To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the
filter, and notice that no add'l fields that do not match the regex
'kvm_exit' will appear.
This issue was introduced by commit c469117d ("tools/kvm_stat:
simplify initializers").
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When displaying debugfs events listed by guests, an attempt to switch to
reporting of stats for individual child trace events results in garbled
output. Reason is that when toggling drilldown, the update of the stats
doesn't honor when events are displayed by guests, as indicated by
Tui._display_guests.
To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Specifying a guest via '-g foo' always results in an error:
  $ kvm_stat -g foo
  Usage: kvm_stat [options]

  kvm_stat: error: Error while searching for guest "foo", use "-p" to
  specify a pid instead

Reason is that Tui.get_pid_from_gname() is not static, as it is supposed
to be.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit:

  681fbec8 ("lockdep: Use consistent printing primitives")

has moved lockdep away from using printk() for printing.

The commit added usage of pr_cont() which wasn't wrapped in the
userspace headers, causing the following warning for the
liblockdep build:

	../../../kernel/locking/lockdep.c:3544:2: warning: implicit declaration of function 'pr_cont' [-Wimplicit-function-declaration]

Adding an empty declaration of 'pr_cont' fixes the problem.
Signed-off-by: NMengting Zhang <zhangmengting@huawei.com>
Signed-off-by: NSasha Levin <alexander.levin@verizon.com>
Reviewed-by: NAlexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/20171212181644.11913-2-alexander.levin@verizon.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

At least on x86_64, the kernel's BPF selftests seemed to have stopped
to build due to 618e165b ("selftests/bpf: sync kernel headers and
introduce arch support in Makefile"):

  [...]
  In file included from test_verifier.c:29:0:
  ../../../include/uapi/linux/bpf_perf_event.h:11:32:
     fatal error: asm/bpf_perf_event.h: No such file or directory
   #include <asm/bpf_perf_event.h>
                                ^
  compilation terminated.
  [...]

While pulling in tools/arch/*/include/uapi/asm/bpf_perf_event.h seems
to work fine, there's no automated fall-back logic right now that would
do the same out of tools/include/uapi/asm-generic/bpf_perf_event.h. The
usual convention today is to add a include/[uapi/]asm/ equivalent that
would pull in the correct arch header or generic one as fall-back, all
ifdef'ed based on compiler target definition. It's similarly done also
in other cases such as tools/include/asm/barrier.h, thus adapt the same
here.

Fixes: 618e165b ("selftests/bpf: sync kernel headers and introduce arch support in Makefile")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

There are no longer any usersapce uses of ACCESS_ONCE(), so we can
remove the definition from our userspace <linux/compiler.h>, which is
only used by tools in the kernel directory (i.e. it isn't a uapi
header).

This patch removes the ACCESS_ONCE() definition, and updates comments
which referred to it. At the same time, some inconsistent and redundant
whitespace is removed from comments.
Tested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/20171127103824.36526-3-mark.rutland@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Recently there was a treewide conversion of ACCESS_ONCE() to
{READ,WRITE}_ONCE(), but a new use was introduced concurrently by
commit:

  16958497 ("perf mmap: Move perf_mmap and methods to separate mmap.[ch] files")

Let's convert this over to READ_ONCE() so that we can remove the
ACCESS_ONCE() definitions in subsequent patches.
Tested-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/20171127103824.36526-2-mark.rutland@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit 4675ff05 ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place.  This looks like a rebase
mistake in the mmotm tree or the merge mistake.  Let's drop those
leftovers as well.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a client has a USB device attached over IP, the vhci_hcd driver is
locally leaking a socket pointer address via the

/sys/devices/platform/vhci_hcd/status file (world-readable) and in debug
output when "usbip --debug port" is run.

Fix it to not leak. The socket pointer address is not used at the moment
and it was made visible as a convenient way to find IP address from socket
pointer address by looking up /proc/net/{tcp,tcp6}.

As this opens a security hole, the fix replaces socket pointer address with
sockfd.
Reported-by: NSecunia Research <vuln@secunia.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes following build error:
vhci_driver.c: In function 'refresh_imported_device_list':
vhci_driver.c:118:37: error: 'snprintf' output may be truncated before
	the last format character [-Werror=format-truncation=]
    snprintf(status, sizeof(status), "status.%d", i);
                                     ^~~~~~~~~~~
vhci_driver.c:118:4: note: 'snprintf' output between 9 and 18 bytes into
	a destination of size 17
    snprintf(status, sizeof(status), "status.%d", i);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: NJulien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: NShuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add more stubs to make it build.

Fixes: 81fbfe8a ("ptr_ring: use kmalloc_array()")
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

There were two trivial updates to these upstream UAPI headers:

  arch/s390/include/uapi/asm/kvm.h
  arch/s390/include/uapi/asm/kvm_perf.h
  arch/x86/lib/x86-opcode-map.txt

Synchronize them with their tooling copies.

(The x86 opcode map includes a new instruction pattern now.)

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The new ORC unwinder breaks the build of a 64-bit kernel on a 32-bit
host.  Building the kernel on a i386 or x32 host fails with:

  orc_dump.c: In function 'orc_dump':
  orc_dump.c:105:26: error: passing argument 2 of 'elf_getshdrnum' from incompatible pointer type [-Werror=incompatible-pointer-types]
    if (elf_getshdrnum(elf, &nr_sections)) {
                            ^
  In file included from /usr/local/include/gelf.h:32:0,
                   from elf.h:22,
                   from warn.h:26,
                   from orc_dump.c:20:
  /usr/local/include/libelf.h:304:12: note: expected 'size_t * {aka unsigned int *}' but argument is of type 'long unsigned int *'
   extern int elf_getshdrnum (Elf *__elf, size_t *__dst);
              ^~~~~~~~~~~~~~
  orc_dump.c:190:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'Elf64_Sxword {aka long long int}' [-Werror=format=]
      printf("%s+%lx:", name, rela.r_addend);
                 ~~^          ~~~~~~~~~~~~~
                 %llx

Fix the build failure.

Another problem is that if the user specifies HOSTCC or HOSTLD
variables, they are ignored in the objtool makefile.  Change the
Makefile to respect these variables.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Joachim <svenjoac@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce14 ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/19f0e64d8e07e30a7b307cd010eb780c404fe08d.1512252895.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>