- 12 9月, 2008 22 次提交
-
-
由 Guy Cohen 提交于
Added support for 3 antennas for Legacy, SISO and MIMO2. MIMO3 is still not supported yet. Signed-off-by: NGuy Cohen <guy.cohen@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Guy Cohen 提交于
This patch fixes a bug in Rate Scaling. When moving from SISO to MIMO we need to choose the lowest higher rate, instead of choosing the highest in MIMO. No doing this can lead to a high packet loss in the highest rate in MIMO, leading not to move MIMO although lower in MIMO could give a better TPT. Signed-off-by: NGuy Cohen <guy.cohen@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Simplify pass_packet_to_mac80211 code block. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
If certain commands were in-flight when the card was pulled or the driver rmmod-ed, cleanup would block on the work queue stopping, but the work queue was in turn blocked on the current command being canceled, which didn't happen. Fix that. Signed-off-by: NDan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
There isn't really a good reason to have the LED configuration options selectable per driver, lets make it default 'y' and make it depend on the NEW_LEDS and LEDS_CLASS interface. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
RFKILL should be enabled for _all_ hardware whether or not they feature a rfkill button or not. Remove driver specific RFKILL configuration options and make the rt2x00lib version depend on CONFIG_RFKILL and defaulting to 'y' to make sure it will always be enabled when RFKILL was enabled. This also fixes some bugs where RFKILL wasn't initialized and didn't respond to RFKILL key presses. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
This reverts: b93ce437 rt2x00: Fix the beacon length bug The workaround is no longer required since it has been correctly fixed in rt2x00usb now. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ehud Gavron 提交于
Recent changes in the specifications have improved the performance of the BCM4306/2 devices that use b43legacy as the driver. These "errors" in the specs have been present from the very first implementation of bcm43xx. Signed-off-by: NEhud Gavron <gavron@wetwork.net> Tested-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
A coding error present since b43legacy was incorporated into the kernel has prevented the driver from using the rate-setting mechanism of mac80211. The driver has been forced to remain at a 1 Mb/s rate. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.26], [2.6.25] Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
We don't need the workqueue anymore, as we can now sleep in the callback. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
It causes compile errors on m68k and it is not needed. Remove it. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the initialization of the default QoS parameters. This got broken by "wireless: fix warnings from QoS patch". Reported-by: Lorenzo Nava Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch brings the 5GHz Phy in any prism54 devices (of course, only those who have one) to life. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
I hope this patch is enough to cover at least the basic requirements of IEEE 802.11h's TPC. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
The firmware can provide lots of useful statistics about noise floor, mac time and lots of numbers about successful transfers and dropped frames. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch adds new filters settings to make the card more useful in monitor mode. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
tcpdump: 02:15:42.874518 61112184us tsft 48.0 Mb/s 2437 MHz (0x0480) antenna 1 [0x0000000e] CF +QoS Data IV 02:15:42.874557 >>>4356079526us<<< tsft 24.0 Mb/s 2437 MHz (0x0480) antenna 1 [0x0000000e] Acknowledgment 02:15:42.976844 61214513us tsft 1.0 Mb/s 2437 MHz (0x0480) antenna 0 [0x0000000e] Beacon as one can see on the huge jump, it's very plausible that firmware does not report the full 64-bit mac time, just the lower 32bit and some kinds of flags... Therefore if we want a useful timestamp we have to emulate the high bits. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
The patch fixes compile warning for ‘iwl4965_hw_channel_switch’ defined but not used. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch cleans up iwlwifi by removing uneeded declarations and removing uneeded symbol export reducing the namespace pollution. It also fixes some typos in comments. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Grumbach, Emmanuel 提交于
This patch makes usage of the results from disconnected antenna alg to know how many antennas are connected. It also synchronizes between the chain noise alg and the W/A that disables power management during association. All the antennas must be enables during the chain noise algorithm. Hence, power management is restored only after the completion of the algorithm. In the future, we will need to update the AP that we don't support MIMO if there is only one antenna connected. We also need to update the rate scaling algorithm. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch renames iwl_priv.ps_mode for clearer iwl_priv.current_ht_config.sm_ps (spatial multiplexing power save). Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch follows 11n spec naming more rigorously replacing MIMO_PS with SM_PS (Spatial Multiplexing Power Save). (Originally submitted as 4 patches, "mac80211: change MIMO_PS to SM_PS", "iwlwifi: change MIMO_PS to SM_PS", "ath9k: change MIMO_PS to SM_PS", and "iwlwifi: remove double definition of SM PS". -- JWL) Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 9月, 2008 18 次提交
-
-
由 Yitchak Gertner 提交于
When EEH detects an i/o error it resets the device thus it cannot be accessed. In this case the driver needs to unload its interface only with OS, kernel and network stack but not with the device. After successful recovery, the driver can load normally. Signed-off-by: NYitchak Gertner <gertner@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wessel 提交于
The hw interface drivers for the usb serial devices deference the tty structure to set up the parameters for the initial console. The tty structure should be passed as a parameter to the set_termios() call. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefanik Gábor 提交于
Handle station IDs of transmitted packets when in monitor mode, and remove the various anti-injection checks from the iwl4965 driver. This makes injection work on iwl4965 and iwl5000. Tested on both cards. Note: To inject management frames with encryption, HW crypto support must be disabled using the "swcrypto=1" modparam (or "swcrypto50=1" for iwl5000). Otherwise most management frames won't be transmitted. Signed-off-by: NGábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
This patch enables active scanning on active channels. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes bad language in the comments in iwl-agn-rs.c. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch fixes regression in iwlwifi IBSS rate scaling caused by the patch named "mac80211: eliminate IBSS warning in rate_lowest_index()" by Vladimir Koutny <vlado@work.ksp.sk>. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch aligns definition of host command with the spec. The inaccuracies weren't critical though. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch disables power save upon association and enables it back after association. This allows to associate to AP on a radar channel if power save is enabled. Radar and passive channels are not allowed for TX (required for association) unless RX is received but PS may close the radio and no RX will be received effectively failing association. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NMohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch cleans up pci registers handling. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch fixes handling of strcit_strtoul return value "0 == sucess". Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch allows variable number of init calibrations and allows addition new HW. This patch also fixes critical bug. Only last calibration result was applied. On reception of one calibration result all the calibration was freed. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
The patch removes the warning since registers might be accessed also during rfkill. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch replaces readl and writel with more cross platform ioread32 and iowrite32. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch makes use of strict_srtoul in sysfs code. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
iwl3945_get_active_dwell_time is called twice within the same context. The patch removes one instance. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
This patch removes bg_post_associate work. A direct call iwl3945_post_associate is made to avoid the waiting by userspace programs. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
Let mac80211 and bss_info_changed callback handle the association and beacon changes. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Abhijeet Kolekar 提交于
The patch removes unlocking of mutex from post_associate. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-