- 27 2月, 2010 13 次提交
-
-
由 Laurent Pinchart 提交于
The realtime clock provided by do_gettimeofday() is affected by time jumps caused by NTP or DST. Furthermore, preliminary investigation showed that SMP systems the realtime clock is based on the CPU TSC, and those could get slightly out of sync, resulting in jitter in the timestamps depending on which processor handles the USB interrupts. Instead of the realtime clock, use a monotonic high resolution clock to timestamp the buffer. As this could in theory introduce a regression with some userspace applications expecting a realtime clock timestamp, add a module parameter to switch back to the realtime clock. Thanks to Paulo Assis for pointing out and investigating the issue. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
As currently most drivers don't define ir_dev->props, we shouldn't assume that this field is defined. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
The card based on stv0903 demod, stb6100 tuner. Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
When preparing the linux-next patches, I got those errors: include/media/ir-core.h:29: warning: left shift count >= width of type In file included from include/media/ir-common.h:29, from drivers/media/video/ir-kbd-i2c.c:50: drivers/media/video/ir-kbd-i2c.c: In function ‘ir_probe’: drivers/media/video/ir-kbd-i2c.c:324: warning: left shift count >= width of type Unfortunately, enum is 32 bits on i386. As we define IR_TYPE_OTHER as 1<<63, it won't work on non 64 bits arch. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
While here, change ir_core_dev_number to be static Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Experimental patch to allow changing the IR protocol. Currently, it support changing between RC-5 and NEC protocols. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Adds an structure to ir_input_register to contain IR device characteristics, like supported protocols and a callback to handle protocol event changes. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Add sysfs skeleton to export remote controller information via /sys/class/irrcv. For now, the code doesn't do much. It just exports an attribute that is meant to report and control the IR protocol used by the keytable. However, the callbacks for this new attribute weren't set yet. Also, it lacks symlinks to the used event interface. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 25 2月, 2010 4 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6由 Linus Torvalds 提交于
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: parisc: Set PCI CLS early in boot.
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix broken sn2 build
-
由 Carlos O'Donell 提交于
Set the PCI CLS early in the boot process to prevent device failures. In pcibios_set_master use the new pci_cache_line_size instead of a hard-coded value. Signed-off-by: NCarlos O'Donell <carlos@codesourcery.com> Reviewed-by: NGrant Grundler <grundler@google.com> Signed-off-by: NKyle McMartin <kyle@redhat.com>
-
- 24 2月, 2010 9 次提交
-
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix out_le32() macro microblaze: Fix cache loop function for cache range
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "block: improve queue_should_plug() by looking at IO depths"
-
由 Steven J. Magnani 提交于
Trailing semicolon causes compilation involving out_le32() to fail. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
I create wrong asm code but none test shows that this part of code is wrong. I am not convinces that were good idea to create asm optimized macros for caches. The reason is that there is not optimization with previous code that's why make sense to add old code and do some benchmarking which functions are faster. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: bug fix for vlan + gro issue tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ON cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit) IPv6: better document max_addresses parameter MAINTAINERS: update mv643xx_eth maintenance status e1000: Fix DMA mapping error handling on RX iwlwifi: sanity check before counting number of tfds can be free iwlwifi: error checking for number of tfds in queue iwlwifi: set HT flags after channel in rxon
-
由 Ajit Khaparde 提交于
Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Be in TS_POLLING state during mwait based C-state entry ACPI: Fix regression where _PPC is not read at boot even when ignore_ppc=0 acer-wmi: Respect current backlight level when loading
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring. drm/nv50: fix vram ptes on IGPs to point at stolen system memory drm/nv50: fix instmem binding on IGPs to point at stolen system memory drm/nv50: improve vram page table construction drm/nv50: more efficient clearing of gpu page table entries drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram drm/nouveau: Fix up pre-nv17 analog load detection.
-
由 Hedi Berriche 提交于
Revert the change made to arch/ia64/sn/kernel/setup.c by commit 204fba4a as it breaks the build. Fixing the build the b94b0808 way breaks xpc because genksyms then fails to generate an CRC for per_cpu____sn_cnodeid_to_nasid because of limitations in the generic genksyms code. Signed-off-by: NHedi Berriche <hedi@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 23 2月, 2010 14 次提交
-
-
由 Atsushi Nemoto 提交于
The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from txdone routine. So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger BUG_ON. This bug does not happen when NAPI disabled. After txdone there must be at least one free tx slot. But with NAPI, this is not true anymore and the BUG_ON can hits on heavy load. In this driver NAPI was enabled on 2.6.33-rc1 so this is regression from 2.6.32 kernel. Reported-by: NRalf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Torgny Johansson 提交于
This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: NTorgny Johansson <torgny.johansson@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
Andrew Morton wrote: >> >From ip-sysctl.txt file in kernel documentation I can see following description >> for max_addresses: >> max_addresses - INTEGER >> Number of maximum addresses per interface. 0 disables limitation. >> It is recommended not set too large value (or 0) because it would >> be too easy way to crash kernel to allow to create too much of >> autoconfigured addresses. ^^^^^^^^^^^^^^ >> If this parameter applies only for auto-configured IP addressed, please state >> it more clearly in docs or rename the parameter to show that it refers to >> auto-configuration. It did mention autoconfigured in the text, but the below makes it more obvious. More clearly document IPv6 max_addresses parameter. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lennert Buytenhek 提交于
I am no longer with Marvell. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Blanchard 提交于
Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
This reverts commit fb1e7538. "Benjamin S." <sbenni@gmx.de> reports that the patch in question causes a big drop in sequential throughput for him, dropping from 200MB/sec down to only 70MB/sec. Needs to be investigated more fully, for now lets just revert the offending commit. Conflicts: include/linux/blkdev.h Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Thomas Hellstrom 提交于
Intercept query commands and apply relocations to their guest pointers. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
* 'nouveau/for-airlied' of ../drm-nouveau-next: drm/nv50: fix vram ptes on IGPs to point at stolen system memory drm/nv50: fix instmem binding on IGPs to point at stolen system memory drm/nv50: improve vram page table construction drm/nv50: more efficient clearing of gpu page table entries drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vram drm/nouveau: Fix up pre-nv17 analog load detection.
-
由 Len Brown 提交于
-
由 Len Brown 提交于
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: BCM47xx: Fix 128MB RAM support MIPS: Highmem: Fix build error
-
由 Linus Torvalds 提交于
Merge branch 'parisc/tracehook' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'parisc/tracehook' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: Revert "parisc: HAVE_ARCH_TRACEHOOK"
-
由 Michael Neuling 提交于
803bf5ec ("fs/exec.c: restrict initial stack space expansion to rlimit") attempts to limit the initial stack to 20*PAGE_SIZE. Unfortunately, in attempting ensure the stack is not reduced in size, we ended up not changing the stack at all. This size reduction check is not necessary as the expand_stack call does this already. This caused a regression in UML resulting in most guest processes being killed. Signed-off-by: NMichael Neuling <mikey@neuling.org> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jouni Malinen <j@w1.fi> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>