When processing Tx exception, only read data until addr1.  Rename
hermes_tx_descriptor_802_11 to hermes_txexc_data since it's only used to
Tx exceptions.  Reuse existing hermes_tx_descriptor structure.  Remove
fields after addr1 - they are not read from the card.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Sparse is much better at finding endianess issues than such visual cues.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The PCMCIA drivers would never be loaded if the CIS were wrong.
No other PCMCIA drivers validate CIS.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes PIO mode on the softmac bcm43xx
driver. (A dscape patch will follow).
It mainly fixes endianess issues.
This patch is tested on PowerPC32 and i386.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

There are some bugs in the current implementation of the SIOCSIWAP wext,
for example that when you do it twice and it fails, it may still try
another access point for some reason. This patch fixes this by introducing
a new flag that tells the association code that the bssid that is in use
was fixed by the user and shouldn't be deviated from.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The original code was doing arithmetics on a little-endian value.
Reported by Stelios Koroneos <stelios@stelioscellar.com>
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  [PARISC] MAINTAINERS
  [PARISC] Make ioremap default to _nocache
  [PARISC] Add new entries to the syscall table
  [PARISC] Further work for multiple page sizes
  [PARISC] Fix up hil_kbd.c mismerge
  [PARISC] defconfig updates
  [PARISC] Document that we tolerate "Relaxed Ordering"
  [PARISC] Misc. janitorial work
  [PARISC] EISA regions must be mapped NO_CACHE
  [PARISC] OSS ad1889: Match register names with ALSA driver

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
  [PATCH] pcmcia/pcmcia_resource.c: fix crash when using Cardbus cards
  [PATCH] vrc4171: update config
  [PATCH] pcmcia: fix oops in static mapping case
  [PATCH] pcmcia: remove unneeded forward declarations
  [PATCH] pcmcia: do not set dev_node to NULL too early
  [PATCH] pcmcia: fix comment for pcmcia_load_firmware
  [PATCH] pcmcia: unload second device first
  [PATCH] pcmcia: add new ID to pcnet_cs

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: possible cleanups
  drm: fixup r300 scratch on BE machines

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable:
  [CIFS] Fix typo in previous
  [CIFS] Readdir fixes to allow search to start at arbitrary position
  [CIFS] Use the kthread_ API instead of opencoding lots of hairy code for kernel
  [CIFS] Don't allow a backslash in a path component
  [CIFS] [CIFS] Do not take rename sem on most path based calls (during

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge:
  powerpc: Fix define_machine so machine_is() works from modules
  powerpc/ppc: export strncasecmp
  [PATCH] powerpc: fix oops in alsa powermac driver
  [PATCH] powerpc: update {g5,iseries,pseries}_defconfigs
  [PATCH] ppc: Fix powersave code on arch/ppc
  [PATCH] powerpc/cell: remove BUILD_BUG_ON and add sys_tee to spu_syscall_table
  [PATCH] powermac: Fix i2c on keywest based chips
  [PATCH] powerpc: Lower threshold for DART enablement to 1GB
  [PATCH] powerpc: IOMMU support for honoring dma_mask

This patch contains the following possible cleanups:
- make the following needlessly global function static:
 - drm_bufs.c: drm_addbufs_fb()
- remove the following unused EXPORT_SYMBOL's:
 - drm_agpsupport.c: drm_agp_bind_memory
 - drm_bufs.c: drm_rmmap_locked
 - drm_bufs.c: drm_rmmap
 - drm_stub.c: drm_get_dev
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDave Airlie <airlied@linux.ie>

This fixes the r300 scratch stuff to work on PPC,
from Ben Herrenschmidt on IRC.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

machine_is() was always returning 0 when used in a module, because
we weren't exporting the machine definitions.  This was why sound
wasn't working on powermacs when CONFIG_SND_POWERMAC=m.  Original
fix from Ben Herrenschmidt, further fixed by me.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I recently found that not all BIOS manufacturers are using the specified
generic PNP id in their TPM ACPI table entry.  I have added the vendor
specific IDs that I know about and added a module parameter that a user can
specify another HID to the probe list if their device isn't being found by the
default list.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a boolean module parameter that allows the user to turn
interrupt support on and off.  The default behavior is to attempt to use
interrupts.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes minor spacing issues.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use __devexit_p() for the exit/remove function to protect against
discarding it.

WARNING: drivers/char/tpm/tpm_infineon.o - Section mismatch: reference to .exit.text:tpm_inf_pnp_remove from .data between 'tpm_inf_pnp' (at offset 0x20) and 'tpm_inf'
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The acpi table which contains the BIOS log events was updated for 1.2.
There are now client and server modes as defined in the specifications with
slightly different formats.  Additionally, the start field was even too
small for the 1.1 version but had been working anyway.  This patch updates
the code to deal with any of the three types of headers probperly (1.1, 1.2
client and 1.2 server).
Signed-off-by: NKylie Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The memory start and length values obtained from the ACPI entry need to be
checked and filled in with the default values from the specification if
they don't exist.  This patch fills in the default values and uses them
appropriately.
Signed-off-by: NKylie Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Apply the latest changes in the TPM interface to the Infineon TPM-driver.
Signed-off-by: NMarcel Selhorst <selhorst@crypto.rub.de>
Acked-by: NKylie Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use set_bit() and clear_bit() for dev_mask manipulation.
Signed-off-by: NKylie Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The timeout and duration values used in the tpm driver are not exposed to
userspace.  This patch converts the storage units to jiffies with
msecs_to_jiffies.  They were always being used in jiffies so this
simplifies things removing the need for calculation all over the place.
The change necessitated a type change in the tpm_chip struct to hold
jiffies.
Signed-off-by: NKylie Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The driver for the next generation of TPM chips version 1.2 including support
for interrupts.  The Trusted Computing Group has written the TPM Interface
Specification (TIS) which defines a common interface for all manufacturer's
1.2 TPM's thus the name tpm_tis.
Signed-off-by: NLeendert van Doorn <leendert@watson.ibm.com>
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Many of the sysfs files were calling the TPM_GetCapability command with array.
 Since for 1.2 more sysfs files of this type are coming I am generalizing the
array so there can be one array and the unique parts can be filled in just
before the command is called.

This updated version of the patch breaks the multi-value sysfs file into
separate files pointed out by Greg.  It also addresses the code redundancy and
ugliness in the tpm_show_* functions pointed out on another patch by Dave
Hansen.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With the TPM 1.2 Specification, each command is classified as short, medium or
long and the chip tells you the maximum amount of time for a response to each
class of command.  This patch provides and array of the classifications and a
function to determine how long the response should be waited for.  Also, it
uses that information in the command processing to determine how long to poll
for.  The function is exported so the 1.2 driver can use the functionality to
determine how long to wait for a DataAvailable interrupt if interrupts are
being used.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Changes in the 1.2 TPM Specification make it necessary to update some fields
of the chip structure in the initialization function after it is registered
with tpm.c thus tpm_register_hardware was modified to return a pointer to the
structure.  This patch makes that change and the associated changes in
tpm_atmel and tpm_nsc.  The changes to tpm_infineon will be coming in a patch
from Marcel Selhorst.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To assist with chip management and better support the possibility of having
multiple TPMs in the system of the same kind, the struct tpm_vendor_specific
member of the tpm_chip was changed from a pointer to an instance.  This patch
changes that declaration and fixes up all accesses to the structure member
except in tpm_infineon which is coming in a patch from Marcel Selhorst.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Many of the sysfs files were calling the TPM_GetCapability command with array.
Since for 1.2 more sysfs files of this type are coming I am generalizing the
array so there can be one array and the unique parts can be filled in just
before the command is called.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch set contains numerous changes to the base tpm driver
(tpm.c) to support the next generation of TPM chips.  The changes include new
sysfs files because of more relevant data being available, a function to
access the timeout and duration values for the chip, and changes to make use
of those duration values.  Duration in the TPM specification is defined as the
maximum amount of time the chip could take to return the results.  Commands
are in one of three categories short, medium and long.  Also included are
cleanups of how the commands for the sysfs files are composed to reduce a
bunch of redundant arrays.

This patch:

Fix minor spacing issues.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A string corresponding to the tcpa_pc_event_id POST_CONTENTS was missing
causing an overflow bug when access was attempted in the get_event_name
function.

This bug was found by Coverity.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The eventname was kmalloc'd and not freed in the *_show functions.

This bug was found by Coverity.
Signed-off-by: NKylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

reiserfs_cache_default_acl() should return whether we successfully found
the acl or not.  We have to return correct value even if reiserfs_get_acl()
returns error code and not just 0.  Otherwise callers such as
reiserfs_mkdir() can unnecessarily lock the xattrs and later functions such
as reiserfs_new_inode() fail to notice that we have already taken the lock
and try to take it again with obvious consequences.
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

from: Greg Howard <ghoward@sgi.com>

Fix Altix system controller (snsc) device names to include the slot number
of the blade whose associated system controller is the target of the device
interface.  Including the slot number avoids a problem we're currently
having where slots within the same enclosure are attempting to create
multiple kobjects with identical names.
Signed-off-by: NGreg Howard <ghoward@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>