- 18 2月, 2013 1 次提交
-
-
由 Ian Abbott 提交于
These are simple data acquistion boards, not HID devices and are handled by the vmk80xx comedi driver. At least one of them (10cf:5500) misidentifies itself as a HID in its USB interface descriptor. Ignore all these devices. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 1月, 2013 1 次提交
-
-
由 Michael Karcher 提交于
Add support for another gamepad to the hid-pl driver. The "color rumble pad P580" marketed using the "Saitek" brand in Germany, and using a USB Vendor ID attributed to "Jess" seems to be electronically identical to the 4-field variant of the "Green Asia" gamepad. The pad has been tested to support rumble strengths up to 255, not just 127. Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 12月, 2012 2 次提交
-
-
由 Alexander Holler 提交于
Those IDs aren't necessary anymore. This reverts commit c8147d9e. Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Acked-by: N"Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Alexander Holler 提交于
It should not be necessary to add IDs for HID sensor hubs to lists in hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB HID sensor hubs, based on a collection of type physical inside a useage page of type sensor. If some sensor hubs stil must be usable as raw devices, a blacklist might be created. Signed-off-by: NAlexander Holler <holler@ahsoftware.de> Acked-by: N"Pandruvada, Srinivas" <srinivas.pandruvada@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 12月, 2012 1 次提交
-
-
由 Lamarque V. Souza 提交于
This patch against kernel 3.7.0-rc8 fixes a kernel oops when turning on the bluetooth mouse with id 0458:0058 [1]. The mouse in question supports both input and hid sessions, however it is blacklisted in drivers/hid/hid-core.c so the input session is one that should be used. Long ago (around kernel 3.0.0) some changes in the bluetooth subsystem made the kernel do not fallback to input session when hid session is not supported or blacklisted. This patch restore that behaviour by making the kernel try the input session if hid_add_device returns ENODEV. The patch exports hid_ignore() from hid-core.c so that it can be used in the bluetooth subsystem. [1] https://bugzilla.kernel.org/show_bug.cgi?id=39882Signed-off-by: NLamarque V. Souza <lamarque@gmail.com> Acked-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 03 12月, 2012 1 次提交
-
-
由 Ben Hutchings 提交于
Commit 0a97e1e9 ('HID: apple: Add Apple wireless keyboard 2011 ANSI PID') did not update the special driver list in hid-core.c, so hid-generic may still bind to this device. Reported-by: NAri Pollak <ari@scvngr.com> References: http://bugs.debian.org/694546Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 11月, 2012 2 次提交
-
-
由 Benjamin Tissoires 提交于
Currently, there is no way to know the index of the current field in the .input_mapping and .event callbacks when this field is inside an array of HID fields. This patch adds this index to the struct hid_usage so that this information is available to input_mapping and event callbacks. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
HID spec details special values for the HID field unit exponent. Basically, the range [0x8..0xf] correspond to [-8..-1], so this is a standard two's complement on a half-byte. Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 11月, 2012 1 次提交
-
-
由 Forest Bond 提交于
Previously, both usbhid and usbtouchscreen would bind to D-WAV devices with class HID and protocol None, so they would be claimed by whichever driver was loaded first. Some of these devices do in fact work with usbhid, but not all of them do. OTOH they all work with usbtouchscreen as of commit 037a833e ("Input: usbtouchscreen - initialize eGalax devices"). So we ignore them in usbhid to prevent getting in the way of usbtouchscreen and claiming an interface that we may not be able to do anything useful with. Signed-off-by: NForest Bond <forest.bond@rapidrollout.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 10月, 2012 2 次提交
-
-
由 Bastien Nocera 提交于
Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a key press and release for each joystick movement or button press or release. For example, moving the stick to the left will generate the "A" key being pressed and then released. A list of all the combinations is available in the iCade developer guide [2]. This driver hides all this and makes the device work as a generic joystick. [1]: http://www.ionaudio.com/products/details/icade [2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdfSigned-off-by: NBastien Nocera <hadess@hadess.net> Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Dirk Hohndel 提交于
This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: NDirk Hohndel <dirk@hohndel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 10月, 2012 1 次提交
-
-
由 Stefan Achatz 提交于
This patch adds support for Roccat Lua gaming mouse. Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 10月, 2012 2 次提交
-
-
由 David Dillow 提交于
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the BlueZ project's user space, but the code that handled it was recently removed as its functionality conflicted with a real HSP implementation and the mapping was thought to be better handled in the kernel. This is a port of the mapping logic from the fakehid driver by Marcel Holtmann to the in-kernel HID layer. We also add support for the Logitech Harmony Adapter for PS3, which emulates the BD Remote. Signed-off-by: NDavid Dillow <dave@thedillows.org> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Kevin Daughtridge 提交于
The dev_rdesc member of the hid_device structure is meant to store the original report descriptor received from the device, but it is currently passed to any report_fixup method before it is copied to the rdesc member. This patch uses a temporary buffer to shield dev_rdesc from the side effects of many HID drivers' report_fixup implementations. usbhid's hid_post_reset checks the report descriptor currently returned by the device against a descriptor that may have been modified by a driver's report_fixup method. That leaves some devices nonfunctional after a resume, with a "reset_resume error 1" reported. This patch checks the new descriptor against the unmodified dev_rdesc instead and uses the original, instead of modified, report size. BugLink: http://bugs.launchpad.net/bugs/1049623Signed-off-by: NKevin Daughtridge <kevin@kdau.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 17 9月, 2012 2 次提交
-
-
由 Stefan Achatz 提交于
Roccat devices are standard compatible, specific drivers are only needed for extended functionality. If Roccat drivers are not configured, hid-generic binds these devices now. Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Sachin Kamat 提交于
Return -ENOMEM instead of -1 if memory allocation fails. Return -EINVAL instead of -1 for stack overflow and underflow errors. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 9月, 2012 2 次提交
-
-
由 Andres Freund 提交于
c1dcad2d added a new driver configured by HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which lead to a recognized but non-working device if the new driver wasn't configured (which is the correct default). Signed-off-by: NAndres Freund <andres@anarazel.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 srinivas pandruvada 提交于
Adding Intel and STM sensor hub in the list of drivers with specialized driver. Signed-off-by: Nsrinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
- 02 9月, 2012 2 次提交
-
-
由 Jiri Kosina 提交于
Update the comment of hid_have_special_driver[] field to reflect the fact that multitouch devices don't need to be present there. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
Going through the motions of printing the debug message information takes a long time; using the keyboard can lead to a 160 us irqsoff latency. This patch skips hid_dump_input() when there are no open handles, which brings latency down to 100 us. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 8月, 2012 1 次提交
-
-
由 Nikolai Kondrashov 提交于
Add support for UC-Logic Tablet TWHA60. It is known to be sold as Genius EasyPen M610 and Monoprice MP1060-HA60. As this tablet has several variations with different number and different assignments of frame buttons, they are simply mapped to F1-F24 range and are left for users to remap in userspace. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 8月, 2012 1 次提交
-
-
由 Simon Farnsworth 提交于
This QUANTA device is driven by the generic hid-multitouch.ko driver, and therefore shouldn't be in the special drivers list. This has been an oversight in 4fa3a583 ("HID: hid-multitouch: Switch to device groups"). Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 8月, 2012 1 次提交
-
-
由 Marek Vasut 提交于
The Freescale i.MX28 BootROM USB recovery mode implements the USB HID protocol, yet the global item tag report size is 128. Linux checks if this is 96 as of now, see [1]. This causes Linux to refuse to communicate with this device, making it impossible to use the recovery mode. This is not a standard HID device per se, but rather a software emulation implemented within the BootROM code and realized through USB OTG-capable port switched to device mode present on the device. Previous attempt to discuss this issue dates back to 2011, see [2]. There has been not much response. Also noteworthy is the [3], where there seems to be a pointing device that has issue similar to this one. The tool making use of the USB recovery mode is available at [4]. [1] http://comments.gmane.org/gmane.linux.kernel.input/22328 [2] http://www.spinics.net/lists/linux-usb/msg43463.html [3] https://bbs.archlinux.org/viewtopic.php?pid=1141340 [4] http://git.bfuser.eu/?p=marex/mxsldr.git;a=summarySigned-off-by: NMarek Vasut <marex@denx.de> Cc: Chen Peter <B29397@freescale.com> Cc: Greg KH <greg@kroah.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 7月, 2012 1 次提交
-
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 23 7月, 2012 1 次提交
-
-
由 Cyrus Lien 提交于
Add Asus All-In-One PC keyboard model AK1D. BugLink: https://bugs.launchpad.net/bugs/1027789Signed-off-by: NCyrus Lien <cyrus.lien@canonical.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 7月, 2012 1 次提交
-
-
由 Lionel Vaux 提交于
Add yet another device to the list of Cypress barcode scanners needing the CP_RDESC_SWAPPED_MIN_MAX quirk. Signed-off-by: NLionel Vaux (iouri) <lionel.vaux@free.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 7月, 2012 2 次提交
-
-
由 David Herrmann 提交于
hid-picolcd and hid-wiimote do not allow any of hidinput, hiddev or hidraw to claim the device but still want to remain on the bus. Hence, if a driver uses the raw_event callback but no other listener claimed the device, we still leave it on the bus as the driver handles everything by itself. It thus becomes its own listener. Under some circumstances (eg., hidinput_connect() fails and raw_event set) a device may be left on the bus even though it requires external listeners. But then if hidinput_connect() fails there are bigger issues than a device that is left unhandled. So we can safely use this heuristic to avoid adding another flag for special devices like hid-picolcd and hid-wiimote. This also removes the ugly hack from hid-picolcd as this is no longer required. Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com> Acked-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Matthieu CASTET 提交于
When using hidraw, hid buffer can be big and take lot's of time to process (interrupt) kernel context. Don't try to parse report if we are only interrested in hidraw. Also don't prepare data for debug stuff if no debugfs file are opened. Signed-off-by: NMatthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 7月, 2012 1 次提交
-
-
由 Tom Harwood 提交于
Corrects two HID descriptor issues, which prevent some Holtek based (USB ID 04d9:a055) keyboards from working. The error when not using the driver is: generic-usb: probe ... failed with error -22 . Signed-off-by: NTom Harwood <tomharwood@fastmail.fm> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 11 7月, 2012 2 次提交
-
-
由 Yuri Khan 提交于
The device should be handled by xpad driver instead of generic HID driver. Signed-off-by: NYuri Khan <yurivkhan@gmail.com> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Ryan Bourgeois 提交于
Add support for the 15'' MacBook Pro Retina. The keyboard is the same as recent models. The patch needs to be synchronized with the bcm5974 patch for the trackpad - as usual. Patch originally written by clipcarl (forums.opensuse.org). [rydberg@euromail.se: Amended mouse ignore lines] Signed-off-by: NRyan Bourgeois <bluedragonx@gmail.com> Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 6月, 2012 1 次提交
-
-
由 Stefan Achatz 提交于
This patch adds rupport for Roccat Savu gaming mouse. In comparison to the other Roccat modules I tried to move even more functionality to userland. Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 6月, 2012 1 次提交
-
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 6月, 2012 1 次提交
-
-
由 Bernhard Seibold 提交于
This driver for the "Lenovo ThinkPad USB Keyboard with Trackpoint" supports setting various device attributes, controlling mute and microphone mute LEDs and enables use of the microphone mute key. Signed-off-by: NBernhard Seibold <mail@bernhard-seibold.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 5月, 2012 1 次提交
-
-
由 Nikolai Kondrashov 提交于
Add support for UC-Logic Wireless Tablet TWHL850. It is known to be sold as Genius MousePen M508W. This tablet has a bug in the default (compatibility) mode which is used in this driver: frame button assignments are mixed up. This is to be fixed with a driver supporting the vendor-specific protocol. Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 5月, 2012 2 次提交
-
-
由 Jiri Kosina 提交于
Put a comment that clarifies the condition that handles both signed and unsigned case for logical min/max in hid_add_field(). Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 srinivas pandruvada 提交于
When logical maximum is 0xffffffff, the parser fails even if logical minimum is more than 0. By HID specification this is a valid combination. Signed-off-by: Nsrinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 01 5月, 2012 3 次提交
-
-
由 Henrik Rydberg 提交于
Switch the driver over to device group handling. By adding the HID_GROUP_MULTITOUCH group to hid-core, hid-generic will no longer match multitouch devices. By adding the HID_GROUP_MULTITOUCH entry to the device list, hid-multitouch will match all unknown multitouch devices, and udev will automatically load the module. Since HID_QUIRK_MULTITOUCH never gets set, the special quirks handling can be removed. Since all HID MT devices have HID_DG_CONTACTID, they can be removed from the hid_have_special_driver list. With this patch, the unknown device ids are no longer NULL, so the code is modified to check for the generic entry instead. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
Devices that do not have a special driver are handled by the generic driver. This patch does the same thing using device groups; Instead of forcing a particular driver, the appropriate driver is picked up by udev. As a consequence, one can now move a device from generic to specific handling by a simple rebind. By adding a new device id to the generic driver, the same thing can be done in reverse. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Henrik Rydberg 提交于
Most HID drivers do not need to know what bus driver is in use. A generic group driver can drive any hid device, and the device list should not need to be duplicated for each new bus. This patch adds wildcard matching to the HID bus, simplifying device list handling for group drivers. Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-