- 24 4月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
Replace uses with of_find_node_by_name and for_each_node_by_name. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 27 3月, 2007 3 次提交
-
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Returning -1 causes the probe to stop, but it should just continue instead. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 15 3月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 3月, 2007 2 次提交
-
-
由 Michael Krufky 提交于
This updates the cx88-blackbird driver to be able to use the new cx23416 firmware image released by Hauppauge Computer Works, while retaining compatibility with the older firmware images. cx2341x firmware can be downloaded at: http://dl.ivtvdriver.org/ivtv/firmware/Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Signed-off-by Mike Isely <isely@pobox.com> Signed-off-by Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 01 3月, 2007 6 次提交
-
-
由 Hans Verkuil 提交于
Move VIDIOC_DBG_S/G_REGISTER from the internal ioctl list to the public ioctls, but mark it as experimental for now. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Add support for starting, stopping, pausing and resuming an MPEG (or similar compressed stream) encoder. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
The VIDIOC_G_ENC_INDEX ioctl can obtain the MPEG index from an MPEG encoder. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jean Delvare 提交于
Fix the following warning: drivers/media/video/cafe_ccic.c: In function `cafe_vidioc_reqbufs': drivers/media/video/cafe_ccic.c:1197: warning: 'ret' might be used uninitialized in this function Probably not a real bug, but the warning can be avoided easily. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
The chip matching in struct v4l2_register for VIDIOC_DBG_G/S_REGISTER was rather primitive. It could not be extended to other busses besides i2c and it lacked a way to. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Due to changes in the i2c handling in 2.6.20 this cx25840 bug surfaced, causing the firmware load to fail for the ivtv driver. The correct sequence is to first attach the i2c client, then use the client's device to load the firmware. Acked-by: NMike Isely <isely@pobox.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 2月, 2007 27 次提交
-
-
由 Marcel Siegert 提交于
The result of copy_to_user was not used, so the compiler complained now a warning will be issued if copy_to_user fails. Signed-off-by: NMarcel Siegert <mws@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
The pvrusb2 driver previously rejected encoder firmware whose size was not a multiple of 8192. But this is a false check because it's possible to find cx23416 firmware whose size doesn't conform to this limit. So change the firmware loader implementation to be more forgiving of the image size. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Thierry MERLE 提交于
- usb alternate selection modified to get the biggest endpoint packet size. - fix sysfs get values for brightness/contrast/hue/saturation Signed-off-by: NThierry MERLE <thierry.merle@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Thierry MERLE 提交于
- fix decoder route output - dynamic frame buffer allocation Signed-off-by: NThierry MERLE <thierry.merle@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch removes the unused struct radionorms. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Jonathan Corbet 提交于
Quiet a spurious gcc warning. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Richard Knutsson 提交于
Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Andrew Morton 提交于
m68k allmodconfig: drivers/media/video/video-buf.c: In function 'videobuf_queue_pci': drivers/media/video/video-buf.c:396: error: 'pci_map_sg' undeclared (first use in this function) drivers/media/video/video-buf.c:396: error: (Each undeclared identifier is reported only once drivers/media/video/video-buf.c:396: error: for each function it appears in.) drivers/media/video/video-buf.c:399: error: 'pci_dma_sync_sg_for_cpu' undeclared (first use in this function) drivers/media/video/video-buf.c:401: error: 'pci_unmap_sg' undeclared (first use in this function) drivers/media/video/video-buf.c: In function 'videobuf_pci_dma_map': Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
When capturing a 60 Hz input the internal field ID is inverted. The VIDIOC_INT_G_VBI_DATA didn't take that into account and so returned XDS instead of CC and vice versa. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Hans Verkuil 提交于
Revisions >= 23 were always reported as revision 23. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Support 64 bit register IDs internally. Only allow root access to this API (for both set and get). Note that actual 64 bit access only becomes possible once the definition for v4l2_register is updated, but this change clears the way for it from the viewpoint of the pvrusb2 driver. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Tweak the encoder setup in order to stop it from corrupting the video data when there is a disruption in the data flow (e.g. a channel change). Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Update the implementation of the communication protocol for operating the encoder, using updated knowledge about the encoder. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Several special-case FX2 commands were being issued through pvr2_write_u16() and pvr2_write_8(), but there's really nothing special case about them. These date from a very early time in the driver development. This patch removes these functions and replaces their use with calls to pvr2_send_request. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mike Isely 提交于
Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This is a maintainability cleanup; use nice names for all the FX2 commands instead of raw bytes. This way we can easily find where we issue FX commands. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The out of tree v4l-dvb build system didn't always override the kernel's configuration settings with v4l-dvb's settings correctly. To work around this, makefiles would define some new macro based on the setting of a config variable. e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set. The v4l-dvb build system should now always override correctly, and this is no longer necessary. This patch gets ride of these extra defines and just uses the CONFIG_* settings directly. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Before, root privileges were only needed to set hardware registers, not to read them. On some hardware, reading from the wrong place at the wrong time can hang the machine. So, to be consistent, root privileges are required to read registers on all hardware. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Maybe someday there will be a device with a register address space > 32-bits, or maybe an i2c device which uses a protocol > 4 bytes long to address its registers. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Schimek 提交于
Functions buffer_release() in bttv-driver.c and vbi_buffer_release() in bttv-vbi.c are ending with: bttv_dma_free(&fh->cap,fh->btv,buf); For vbi it seems to be wrong. Both functions should end with: bttv_dma_free(q,fh->btv,buf); Thanks to Peter Schlaf <peter.schlaf@web.de> for pointing this. Signed-off-by: NMichael H. Schimek <mschimek@gmx.at> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Before this patch, vivi were simulating a scatter gather DMA transfer. While this is academic, showing how stuff really works on a real PCI device, this means a non-optimized code. There are only two memory models that vivi implements: 1) kernel alloced memory. This is also used by read() method. On this case, a vmalloc32 buffer is allocated at kernel; 2) userspace allocated memory. This is used by most userspace apps. video-buf will store this pointer. a simple copy_to_user is enough to transfer data. The third memory model scenario supported by video-buf is overlay mode. This model is not implemented on vivi and unlikely to be implemented on newer drivers, since now, most userspace apps do some post-processing (like de-interlacing). After this patch, some cleanups may be done at video-buf.c to avoid allocating pages, when the driver doesn't need a PCI buffer. This is the case of vivi and usb drivers. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
The direct register access ioctls were defined as kernel internal only, but they are very useful for debugging hardware from userspace and are used as such. Officially export them. VIDIOC_INT_[SG]_REGISTER is renamed to VIDIOC_DBG_[SG]_REGISTER Definition of ioctl and struct v4l2_register is moved from v4l2-common.h to videodev2.h. Types used in struct v4l2_register are changed to the userspace exportable versions (u32 -> __u32, etc). Use of VIDIOC_DBG_S_REGISTER requires CAP_SYS_ADMIN permission, so move the check into the video_ioctl2() dispatcher so it doesn't need to be duplicated in each driver's call-back function. CAP_SYS_ADMIN check is added to pvrusb2 (which doesn't use video_ioctl2). Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
Add support for these ioctls to the video_ioctl2 system and the cx88 driver. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
pvrusb2 have only one tuner inside. However, as it were not handling index, a call to v4l-info were returning as if it were an infinite number of tuners: $ v4l-info|grep VIDIOC_G_TUNER |head -5 VIDIOC_G_TUNER(0) VIDIOC_G_TUNER(1) VIDIOC_G_TUNER(2) VIDIOC_G_TUNER(3) VIDIOC_G_TUNER(4) Acked-by: NMike Isely <isely@isely.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
pvrusb2-encoder.c: In function 'pvr2_encoder_cmd': pvrusb2-encoder.c:195: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int' pvrusb2-encoder.c:205: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int' pvrusb2-encoder.c: In function 'pvr2_encoder_vcmd': pvrusb2-encoder.c:303: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int' Acked-by: NMike Isely <isely@isely.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-