- 06 10月, 2014 3 次提交
-
-
由 Chen Gang 提交于
xenbus_va_dev_error() is for printing error, so when error string is too long to be truncated, need not BUG_ON(), still return truncation string is OK. Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Chen Gang 提交于
A grant reference (which is a positive number) can indicate success, so the original comments need be improved. Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Mukesh Rathor 提交于
This fixes two bugs in PVH guests: - Not setting EFER.NX means the NX bit in page table entries is ignored on Intel processors and causes reserved bit page faults on AMD processors. - After the Xen commit 7645640d6ff1 ("x86/PVH: don't set EFER_SCE for pvh guest") PVH guests are required to set EFER.SCE to enable the SYSCALL instruction. Secondary VCPUs are started with pagetables with the NX bit set so EFER.NX must be set before using any stack or data segment. xen_pvh_cpu_early_init() is the new secondary VCPU entry point that sets EFER before jumping to cpu_bringup_and_idle(). Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
- 03 10月, 2014 5 次提交
-
-
由 Juergen Gross 提交于
Size restrictions native kernels wouldn't have resulted from the initrd getting mapped into the initial mapping. The kernel doesn't really need the initrd to be mapped, so use infrastructure available in Xen to avoid the mapping and hence the restriction. Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
To be able to use an initially unmapped initrd with xen the following header files must be synced to a newer version from the xen tree: include/xen/interface/elfnote.h include/xen/interface/xen.h As the KEXEC and DUMPCORE related ELFNOTES are not relevant for the kernel they are omitted from elfnote.h. Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
The pvscsi frontend driver requires the xenbus frontend driver. Reflect this in Kconfig. Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
由 Julien Grall 提交于
The Xen ARM API is stable since Xen 4.4 and everything has been upstreamed in Linux for ARM and ARM64. Therefore we can drop "EXPERIMENTAL" from the Xen option in the both Kconfig. Signed-off-by: NJulien Grall <julien.grall@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org
-
由 David Vrabel 提交于
scsifront_action_handler() will deadlock on host->host_lock, if the ring is full and it has to wait for entries to become available. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NJuergen Gross <jgross@suse.com>
-
- 23 9月, 2014 13 次提交
-
-
由 David Vrabel 提交于
The _PAGE_IO_MAP PTE flag was only used by Xen PV guests to mark PTEs that were used to map I/O regions that are 1:1 in the p2m. This allowed Xen to obtain the correct PFN when converting the MFNs read from a PTE back to their PFN. Xen guests no longer use _PAGE_IOMAP for this. Instead mfn_to_pfn() returns the correct PFN by using a combination of the m2p and p2m to determine if an MFN corresponds to a 1:1 mapping in the the p2m. Remove _PAGE_IOMAP, replacing it with _PAGE_UNUSED2 to allow for future uses of the PTE flag. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
-
由 David Vrabel 提交于
Since mfn_to_pfn() returns the correct PFN for identity mappings (as used for MMIO regions), the use of _PAGE_IOMAP is not required in pte_mfn_to_pfn(). Do not set the _PAGE_IOMAP flag in pte_pfn_to_mfn() and do not use it in pte_mfn_to_pfn(). This will allow _PAGE_IOMAP to be removed, making it available for future use. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 David Vrabel 提交于
If a fault on a kernel address is due to a non-present page, then it cannot be the result of stale TLB entry from a protection change (RO to RW or NX to X). Thus the pagetable walk in spurious_fault() can be skipped. See the initial if in spurious_fault() and the tests in spurious_fault_check()) for the set of possible error codes checked for spurious faults. These are: IRUWP Before x00xx && ( 1xxxx || xxx1x ) After ( 10001 || 00011 ) && ( 1xxxx || xxx1x ) Thus the new condition is a subset of the previous one, excluding only non-present faults (I == 1 and W == 1 are mutually exclusive). This avoids spurious_fault() oopsing in some cases if the pagetables it attempts to walk are not accessible. This obscures the location of the original fault. This also fixes a crash with Xen PV guests when they access entries in the M2P corresponding to device MMIO regions. The M2P is mapped (read-only) by Xen into the kernel address space of the guest and this mapping may contains holes for non-RAM regions. Read faults will result in calls to spurious_fault(), but because the page tables for the M2P mappings are not accessible by the guest the pagetable walk would fault. This was not normally a problem as MMIO mappings would not normally result in a M2P lookup because of the use of the _PAGE_IOMAP bit the PTE. However, removing the _PAGE_IOMAP bit requires M2P lookups for MMIO mappings as well. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Reported-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: NDave Hansen <dave.hansen@intel.com>
-
由 Daniel Kiper 提交于
I discovered that some needed stuff is defined/declared in headers which are not included directly. Currently it works but if somebody remove required headers from currently included headers then build will break. So, just in case directly include all needed headers. Signed-off-by: NDaniel Kiper <daniel.kiper@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Dan Carpenter 提交于
This code was confusing because we had an unsigned long and then we compared it to UINT_MAX and then we stored it in a u16. How many bytes is this supposed to have: 2, 4 or 16??? I've made it a u16 throughout. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Dan Carpenter 提交于
This function is only called with a spin_lock held and IRQs disabled. The allocation is not allowed to sleep and NOIO is not sufficient, it has to be ATOMIC. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Add myself as maintainer for the Xen pvSCSI drivers. Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Introduces the Xen pvSCSI backend. With pvSCSI it is possible for a Xen domU to issue SCSI commands to a SCSI LUN assigned to that domU. The SCSI commands are passed to the pvSCSI backend in a driver domain (usually Dom0) which is owner of the physical device. This allows e.g. to use SCSI tape drives in a Xen domU. The code is taken from the pvSCSI implementation in Xen done by Fujitsu based on Linux kernel 2.6.18. Changes from the original version are: - port to upstream kernel - put all code in just one source file - adapt to Linux style guide - use target core infrastructure instead doing pure pass-through - enable module unloading - support SG-list in grant page(s) - support task abort - remove redundant struct backend - allocate resources dynamically - correct minor error in scsiback_fast_flush_area - free allocated resources in case of error during I/O preparation - remove CDB emulation, now handled by target core infrastructure Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NNicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Introduces the Xen pvSCSI frontend. With pvSCSI it is possible for a Xen domU to issue SCSI commands to a SCSI LUN assigned to that domU. The SCSI commands are passed to the pvSCSI backend in a driver domain (usually Dom0) which is owner of the physical device. This allows e.g. to use SCSI tape drives in a Xen domU. The code is taken from the pvSCSI implementation in Xen done by Fujitsu based on Linux kernel 2.6.18. Changes from the original version are: - port to upstream kernel - put all code in just one source file - move module to appropriate location in kernel tree - adapt to Linux style guide - some minor code simplifications - replace constants with defines - remove not used defines - add support for larger SG lists by putting them in a granted page Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Add the definition of pvSCSI protocol used between the pvSCSI frontend in a XEN domU and the pvSCSI backend in a XEN driver domain (usually Dom0). This header was originally provided by Fujitsu for Xen based on Linux 2.6.18. Changes are: - Added comments. - Adapt to Linux style guide. - Add support for larger SG-lists by putting them in an own granted page. - Remove stale definitions. Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Export bind_interdomain_evtchn_to_irq() so drivers can use threaded interrupt handlers with: irq = bind_interdomain_evtchn_to_irq(remote_dom, remote_port); if (irq < 0) /* error */ ret = request_threaded_irq(...); Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Chen Gang 提交于
The cleanup loop in grow_gnttab_list() is safe from the underflow of the unsigned 'i' since nr_glist_frames is >= 1, but refactor it anyway. Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Matt Rushton 提交于
Instead of ballooning up and down dom0 memory this remaps the existing mfns that were replaced by the identity map. The reason for this is that the existing implementation ballooned memory up and and down which caused dom0 to have discontiguous pages. In some cases this resulted in the use of bounce buffers which reduced network I/O performance significantly. This change will honor the existing order of the pages with the exception of some boundary conditions. To do this we need to update both the Linux p2m table and the Xen m2p table. Particular care must be taken when updating the p2m table since it's important to limit table memory consumption and reuse the existing leaf pages which get freed when an entire leaf page is set to the identity map. To implement this, mapping updates are grouped into blocks with table entries getting cached temporarily and then released. On my test system before: Total pages: 2105014 Total contiguous: 1640635 After: Total pages: 2105014 Total contiguous: 2098904 Signed-off-by: NMatthew Rushton <mrushton@amazon.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
- 22 9月, 2014 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Fixes for ARM, the most notable being the fix from Nathan Lynch to fix the state of various registers during execve, to ensure that data can't be leaked between two executables. Fixes from Victor Kamensky for get_user() on big endian platforms, since the addition of 8-byte get_user() support broke these fairly badly. A fix from Sudeep Holla for affinity setting when hotplugging CPU 0. A fix from Stephen Boyd for a perf-induced sleep attempt while atomic. Lastly, a correctness fix for emulation of the SWP instruction on ARMv7+, and a fix for wrong carry handling when updating the translation table base address on LPAE platforms" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8149/1: perf: Don't sleep while atomic when enabling per-cpu interrupts ARM: 8148/1: flush TLS and thumbee register state during exec ARM: 8151/1: add missing exports for asm functions required by get_user macro ARM: 8137/1: fix get_user BE behavior for target variable with size of 8 bytes ARM: 8135/1: Fix in-correct barrier usage in SWP{B} emulation ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs ARM: 8132/1: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSET
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "some media bug fixes: - a Kconfig dependency issue - some fixes for af9033/it913x demod to be more reliable and address a performance regression - cx18: fix an oops on devices with tda8290 tuner - two new USB IDs for af9035 - a couple fixes on smapp driver" * tag 'media-v3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] af9035: new IDs: add support for PCTV 78e and PCTV 79e [media] af9033: feed clock to RF tuner [media] it913x: init tuner on attach [media] af9033: update IT9135 tuner inittabs [media] Kconfig: do not select SPI bus on sub-driver auto-select [media] cx18: fix kernel oops with tda8290 tuner [media] smiapp: Set sub-device owner [media] smiapp: Fix power count handling
-
- 21 9月, 2014 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging / IIO fixes from Greg KH: "Here are some IIO and Staging driver fixes for 3.17-rc6. They are all pretty simple, and resolve reported issues" * tag 'staging-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt6655: buffer overflow in ioctl iio:magnetometer: bugfix magnetometers gain values iio: adc: at91: don't use the last converted data register iio: adc: xilinx-xadc: assign auxiliary channels address correctly iio: meter: ade7758: Fix indio_dev->trig assignment iio: inv_mpu6050: Fix indio_dev->trig assignment iio: gyro: itg3200: Fix indio_dev->trig assignment iio: st_sensors: Fix indio_dev->trig assignment iio: hid_sensor_hub: Fix indio_dev->trig assignment iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment iio: accel: bma180: Fix indio_dev->trig assignment iio:trigger: modify return value for iio_trigger_get iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes / quirks from Greg KH: "Here are some USB and PHY fixes and quirks for 3.17-rc6. Nothing major, just a few things that have been reported" * tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter USB: EHCI: unlink QHs even after the controller has stopped phy: spear1340-miphy: fix driver dependencies phy: spear1310-miphy: fix driver dependencies phy: miphy365x: Fix off-by-one error
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Here are the target pending fixes for v3.17-rc6. Included are Sagi's long overdue fixes related to iser-target shutdown, along with a couple of fixes from Sebastian related to ALUA Referrals changes that when in during the v3.14 time-frame. Also included are a few iscsi-target fixes, most recently of which where found during Joern's Coverity scanning of target code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE target: Fix user data segment multiplier in spc_emulate_evpd_b3() iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup Target/iser: Fix initiator_depth and responder_resources Target/iser: Avoid calling rdma_disconnect twice Target/iser: Don't put isert_conn inside disconnected handler Target/iser: Get isert_conn reference once got to connected_handler
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of radeon fixes for oops on module unload, and problems with resetting the dma engine, one nouveau fix for black boxes in rendering on my mbp retina, one sti fix, and a couple of intel fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: ltc/gf100-: fix cbc issues on certain boards drm/bochs: add missing drm_connector_register call drm/cirrus: add missing drm_connector_register call drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page drm/nouveau/runpm: fix module unload drm/radeon/px: fix module unload vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops drm/radeon: don't reset dma on r6xx-evergreen init drm/radeon: don't reset sdma on CIK init drm/radeon: don't reset dma on NI/SI init drm/radeon/dpm: fix resume on mullins drm/radeon: Disable HDP flush before every CS again for < r600 drm/radeon: delete unused PTE_* defines drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv drm: sti: do not iterate over the info frame array drm/i915: Fix SRC_COPY width on 830/845g
-
- 20 9月, 2014 12 次提交
-
-
由 Ben Skeggs 提交于
A mismatch between FB and LTC's idea of how big a large page is causes issues such as black "holes" in rendering to occur on some boards (those where LTC is configured for 64KiB large pages) when compression is used. Confirmed to fix at least the GK107 MBP. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
single fix for regression on rs4xx/rs690/rs740 * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dan Carpenter 提交于
->u.generic_elem.len is a user controlled number between 0-255. We should limit it to avoid memory corruption. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Merge tag 'iio-fixes-3.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 3.17 cycle. * Fix an overwritten error return that can prevent deferred probing when using of_iio_channel_get_by_name * A series that deals with an incorrect reference count when the default trigger is set within the main probe routine for a driver. Can result in a double free if the trigger is changed. * Fix a buglet with xilinx-xadc concerning setup of the address for an aux channel. * At91 adc driver could sometimes get a touchscreen reading rather than the intended adc channel. This is fixed by using the channel data register instead. * Fix some ST magnetometer gain values that differ in production parts from the prerelease ones used for driver development.
-
由 Mark 提交于
This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB- SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI chain to be accessed. Without it only the (single) device with SCSI ID 0 can be used. The standalone converter sold by Entrega had model number U1-SC25. Xircom acquired Entrega and re-branded the product line PortGear. The PortGear USB to SCSI Converter (model PGSCSI) is internally identical to the Entrega product, but later models may use a different USB ID. The Entrega-branded units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and Macintosh drivers also support 085A:0028. Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac (8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may have initially used the same ID as the standalone U1-SC25 (1645:0007), but later production used 085A:0026. My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133 probably also exist. This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I couldn't find any mention of that actually existing in the wild; perhaps it was cancelled before release? Signed-off-by: NMark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mark 提交于
Hi, The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g. iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM Microsystems chips. Only the connectors differ; both have the same USB ID. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have one of these, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the products use. Signed-off-by: NMark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mark 提交于
The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by: NMark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
Old code in ehci-hcd tries to expedite disabling endpoints after the controller has stopped, by destroying the endpoint's associated QH without first unlinking the QH. This was necessary back when the driver wasn't so careful about keeping track of the controller's state. But now we are careful about it, and the driver knows that when the controller isn't running, no unlinking delay is needed. Furthermore, skipping the unlink step will trigger a BUG() in qh_destroy() when the preceding QH is released, because the link pointer will be non-NULL. Removing the lines that skip the unlinking step and go directly to QH_STATE_IDLE fixes the problem. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-by: NJoe Lawrence <joe.lawrence@stratus.com> Tested-by: NJoe Lawrence <joe.lawrence@stratus.com> CC: <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Merge tag 'for_3.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: misc fixes in PHY drivers
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "I've got a revert to fix a regression with btrfs device registration, and Filipe has part two of his fsync fix from last week" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Revert "Btrfs: device_list_add() should not update list when mounted" Btrfs: set inode's logged_trans/last_log_commit after ranged fsync
-