The query for the viperboard version was done with memory buffer
on the stack but usb transfers need dma capable memory buffer.
This is fixed now.
Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Pass on the correct error message from platform_get_irq()
instead of hard coding it to "EINVAL".

Also change label from "err" to "ret" for better
readability and update the same in error path.
Signed-off-by: NPatil, Rachna <rachna@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

reg_offset is offset of the status/mask registers. Now, since status_base
and mask_base are pointing to corresponding first registers, reg_offset
should start from 0 otheriwse regmap_add_irq_chip will fail during probe.
Signed-off-by: NInderpal Singh <inderpal.singh@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This is supported identically to the previous revisions.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Previously a generic binding 'i2c-client-wake' was created which
enabled I2C devices to register themselves as wake-up devices.
This binding was later over-thrown by 'wakeup-source'. The STMPE
driver was fixed-up, but the document was neglected. This patch
aims to rectify that.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Hierarchically, the abx500-clk shall be considered as a child of the
ab8500 core. The abx500-clk is intiated at arch init and thus the clks
will be available when clients needs them.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC,
a battery charger and a general purpose ADC. This patch adds support for
the MFD with support for a regulator driver and a backlight driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This patch frees stmpe driver from tension of freeing resources.
devm_* derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

At every boot of an (outdated) laptop lpc_ich prints an error:
    lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized

But if one looks at lpc_ich's probe function one notices that the code
only cares if both lpc_ich_init_wdt() and lpc_ich_init_gpio() fail to
add any cells. So stop treating the failure to add a single cell as an
error. Those messages can be printed at notice level. And then only warn
if no cells were added.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The older southbridges supported by the lpc_ich driver do not
provide memory-mapped space of the root complex. The driver
correctly avoids computing the iomem address in this case, yet
submits a zeroed resource request anyway (via mfd_add_devices()).

Remove the iomem resource from the resource array submitted to the
mfd core for the older southbridges.
Acked-by: NAaron Sierra <asierra@xes-inc.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

To facilitate upcoming cleanup in twl stack.
No functional changes.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

To facilitate upcoming cleanup in twl stack.
No functional changes.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

To facilitate upcoming cleanup in twl stack.
No functional changes.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

To facilitate upcoming cleanup in twl stack.
No functional changes.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Group the twl_mapping table in 5 lines chunks so it is more easier to find
the row we are looking for (if we need to).
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

It is easier fro humans to understand decimal numbers than hexadecimals when
they are used as indexes.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Use enum list for the module definitions (TWL4030_MODULE_*) which will ease
up future work with the IDs.
At the same time group the IDs in block of five so it is easier to find the
ID we are looking for (to count the number they stand for).

At the same time define TWL_MODULE_LED so client drivers can switch to use
it as soon as it is possible.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

AUDIO and MADC only available on twl4030 series and the TWL_MODULE_* mapping
is not needed.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Make the twl child registration calls a bit more uniform by always using the
SUB_CHIP_ID* define instead of the mixed use of the define and magic number.

At the same time correct the following devices so they are registered for the
correct parent device (i2c slave):
twl4030_wdt is accessible on 0x4b address and not 0x48
twl4030_pwrbutton is accessible on 0x4b address and not 0x49
twl4030-audio is on 0x49 all the time
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Since the twl-core has been converted to use regmap it is no longer needed
to allocate bigger buffer for data when writing to twl.

CC: Grant Likely <grant.likely@secretlab.ca>
CC: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Remove the custom code to do I/O and replace it with standard regmap calls.
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The twl6030-pwm driver is going to be deleted since it was only able to
control the Charging indicator LED on the twl6030 PMIC.
The new set of drivers are going to provide support for both PWMs and PWM
driven LED outputs on TWL4030 and TWL6030 PMICs.
The twl-pwm driver will handle the PWMs (2 instance) while the twl-pwmled
driver is to control the two LED instance on TWL4030 and to charging
indicator LED (1 instance) on TWL6030.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

twl4030-madc driver can only handle twl4030 class MADC. The newer revisions
of twl does not have MADC, instead they have different IP called GPADC which
is not backward compatible.
Acked-by: NTero Kristo <t-kristo@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Retu is a multi-function device found on Nokia Internet Tablets
implementing at least watchdog, RTC, headset detection and power button
functionality.

This patch implements minimum functionality providing register access,
IRQ handling and power off functions.
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

linux/err.h was included twice.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

They contain documented status readback fields.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Set tps65217 PMIC status to OFF if power enable toggle is supported.
By setting this bit to 1 to enter PMIC to OFF state when PWR_EN pin
is pulled low. Also adds a DT flag to specify that device pmic
supports shutdown control or not.
Signed-off-by: NColin Foe-Parker <colin.foeparker@logicpd.com>
[anilkumar@ti.com: move the additions to tps65217 MFD driver]
Signed-off-by: NAnilKumar Ch <anilkumar@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This fixes the following build error on some architectures (parisc at least):

drivers/mmc/host/rtsx_pci_sdmmc.c: In function 'sd_normal_rw':
drivers/mmc/host/rtsx_pci_sdmmc.c:448:2: error: implicit
declaration of function 'kzalloc'
[-Werror=implicit-function-declaration]
drivers/mmc/host/rtsx_pci_sdmmc.c:448:6: warning: assignment
makes pointer from integer without a cast [enabled by default]
drivers/mmc/host/rtsx_pci_sdmmc.c:472:2: error: implicit
declaration of function 'kfree'
[-Werror=implicit-function-declaration]
Signed-off-by: NWei WANG <wei_wang@realsil.com.cn>
Acked-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

For Realtek card reader, internal regsiter SD_CFG2 should be configured
before transferring data.
The default value of SD_CFG2 is proper for writing data. But for reading
sequence, the timing is not good enough. So in some extreme circumstance,
card reader may sample the response data from the card as good even if
the data is wrong. And this will cause the bad consequence.
In the prior version, the value of this register has been calculated,
but forgotten to write back to the internal register.
Signed-off-by: NWei WANG <wei_wang@realsil.com.cn>
Acked-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Use the regmap irq framework for implementing TPS65090 interrupt
support in place of implementing it locally.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Since tps65090 register is accessed via regmap, moving
the register access APIs to header and making it as inline.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Remove unused member from tps65090 data structure as
these are not used.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Add error prints when memory allocation failed for
tps65090 data. Also cleanups the melloc arguments.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

TPS65090 supports the battery charging and hence adding
the device name in the list of TPS65090 children. Also
remove the tps65090-regulator as it duplicates with
tps65090-pmic for regulator driver.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

TPS80031/ TPS80032 Fully Integrated Power Management with Power
Path and Battery Charger. The device provides five configurable
step-down converters, 11 general purpose LDOs, USB OTG Module,
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
Power Path from USB, 32K clock generator.

Add the mfd core driver for TPS80031/TPS80032.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Reviwed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The DSP memories are mapped into the register map, make them readable and
writable by updating max_register appropriately.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NDavide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: NAlessandro Rubini <rubini@gnudd.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

These are required for the clock infrastructure code to properly configure
and control the sta2x11 PLLs.
Signed-off-by: NDavide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: NAlessandro Rubini <rubini@gnudd.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NDavide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: NAlessandro Rubini <rubini@gnudd.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>