- 17 12月, 2009 40 次提交
-
-
由 Juha Keski-Saari 提交于
This change ensures the regulator REMAP register configuration is in a known state so state transitions will function as intended regardless of possible bootloader effects on it Signed-off-by: NJuha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Juha Keski-Saari 提交于
This change includes regulator turnon delay values and the REMAP reset configuration to the twlreg_info struct, since they are basic attributes of every TWL regulator Signed-off-by: NJuha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Juha Keski-Saari 提交于
Defines VIO, VDD1, VDD2, VPLL1 and VINT* regulators as always_on by default since they are critical to TWL and its master's functionality and should be on in all cases where RegFW is used Signed-off-by: NJuha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Juha Keski-Saari 提交于
Define all twl4030 regulators in the twlreg_info table, along with appropriate VSEL tables for adjustable regulators Signed-off-by: NJuha Keski-Saari <ext-juha.1.keski-saari@nokia.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Alberto Panizzo 提交于
When the mc13783-regulator driver is built in kernel, probing it during the regulator subsystem initialisation result in a fault. That is because regulator subsystem is planned to be initialised very early in the boot process, before the mfd subsystem initialisation. The mc12783-regulator probing process need to access to the mc13783-core functionality to read/write mc13783 registers and so must be called after the mc13783-core driver initialisation. The way to do this is to let the kernel probe the mc13783-regulator driver when mc13783-core register his regulator subdevice. Signed-off-by: NAlberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Lars-Peter Clausen 提交于
Currently it is possible for regulator_bulk_{enable,disable} operations to generate unbalanced regulator_{disable,enable} calls in its error path. In case of an error only those regulators of the bulk operation which actually had been enabled/disabled should get their original state restored. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Stefan Roese 提交于
Signed-off-by: NStefan Roese <sr@denx.de> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Julia Lawall 提交于
IS_ERR returns only 1 or 0. The callsite of setup_regulators expects a negative integer in an error case. Thus, PTR_ERR has to be used to extract it. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E1; @@ *E = IS_ERR(...) ... when != E = E1 *return E; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Liam Girdwood 提交于
consumer.h requires device.h for stand alone build. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Uwe Kleine-König 提交于
- define needed registers and bits in the driver - properly namespace functions and structs - fix locking as required by patch "mfd/mc13783: near complete rewrite" - use platform_data as provided by "mfd/mc13783: near complete rewrite" instead of accessing struct mc13783 - struct mc13783_regulator_priv.desc is (and was) unused and so can go away - use cpp magic to initialize mc13783_regulators - bring MODULE_LICENSE in sync with actual copyright - minor style fixes This allows not including mc13783-private.h which I intend to remove soon. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: NMark Brown <broonie@opensoruce.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Uwe Kleine-König 提交于
One annoying thing about the old name was that the module was just called mc13783 which caused wrong expectations (at least for me). Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: NMark Brown <broonie@opensoruce.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Linus Walleij 提交于
This patch will remove surplus register writes on shut down of LDO D (this magic was not needed), remove an unnecessary (!) error check and really unregister the regulators when the module is unloaded. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Roel Kluin 提交于
If selector equals ARRAY_SIZE(da9034_ldo12_data), that is one too large already. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
If we fall through it means that we hit an unknown regulator/chip combination so set -ENOENT as an explicit flag (the return code is only used internally). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
'static const int const' means the same thing as 'static const int' and sparse complains about this. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Since some regulators in the system may not support suspend mode configuration we need to allow some regulators to have a missing suspend mode configuration. Do this by requiring that disabled regulators are explicitly flagged and then skip over regulators that have no state specified. Try to avoid surprises by warning the if we could set the state but no configuration is provided. This also ensures that an all zeros configuration generates a warning rather than silently disabling the regulator. Reported-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Some of the regulator API functions have code to allow the machine constraints to override the device supplied name for the regulator in the constraints in order to help tie logging to supplies on the board and disambiguate when there is more than one regulator chip in the system. Factor this code out into a new rdev_get_name() function and use it throughout the regulator API so that we always use the same name. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
When voltage or current constraints are either missing or specify a range display the actual setting along with the constraints if we can. This can aid debugging of configuration problems. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
It makes sense to do all the voltage configuration in the one split out function. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
This allows constraints to take effect on regulators that support voltage setting but for which the board does not specify a voltage range (for example, because it is fixed correctly at system startup). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
If we're going to log an error we may as well log what the error code that we're failing on is. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Haojian Zhuang 提交于
Hi Liam, Since Samuel merged a new version of mfd 88pm8607 driver, I format a new patch on regulator 88pm8607. I paste the new patch in mail. Please help to review again. And I also attach the mfd driver in mail. From: Haojian Zhuang <haojian.zhuang@marvell.com> Date: Thu, 8 Oct 2009 09:36:53 -0400 Subject: [PATCH] regulator: Add 88PM8607 PMIC driver This patch adds regulator drivers for Marvell 88PM8607 PMIC. This controller contains 3 DVC and 14 LDO regulators. This controller uses I2C interface. Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
The BuckWise DC-DC convertors in WM831x devices support switching to a second output voltage using the logic level on one of the device pins. This is intended to allow rapid voltage switching for uses like cpufreq, replacing the I2C or SPI write used to configure the voltage of the regulator with a much faster GPIO status change. This is implemented by keeping the DVS voltage configured as the maximum voltage permitted for the regulator. If a request is made for the maximum voltage then the GPIO is used to switch to the DVS voltage, otherwise the normal ON voltage is updated and used. This follows the idiom used by most cpufreq drivers, which drop the minimum voltage as the core frequency is dropped but use a constant maximum - raising the voltage should normally be fast, but lowering it may be slower. Configuration of the DVS MFP on the device should be done externally, for example via OTP. Support is present in the hardware for monitoring the status of the transition using a second GPIO. This is not currently implemented but platform data is provided for it - the driver currently assumes that the device will be configured to transition immediately - but platform data is provided to reduce merge issues once it is. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Wolfram Sang 提交于
Tested with a MX25-based custom board. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Al Viro 提交于
Replacing error = 0; if (error) op with nothing is not quite an equivalent transformation ;-) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: XFS: Free buffer pages array unconditionally xfs: kill xfs_bmbt_rec_32/64 types xfs: improve metadata I/O merging in the elevator xfs: check for not fully initialized inodes in xfs_ireclaim
-
由 Roland Dreier 提交于
Commit 3d1e4631 ("get rid of init_file()") removed the export of alloc_file() -- possibly inadvertently, since that commit mainly consisted of deleting the lines between the end of alloc_file() and the start of the code in init_file(). There is in fact one modular use of alloc_file() in the tree, in drivers/infiniband/core/uverbs_main.c, so re-add the export to fix: ERROR: "alloc_file" [drivers/infiniband/core/ib_uverbs.ko] undefined! when CONFIG_INFINIBAND_USER_ACCESS=m. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits) powerpc: fix up for mmu_mapin_ram api change powerpc: wii: allow ioremap within the memory hole powerpc: allow ioremap within reserved memory regions wii: use both mem1 and mem2 as ram wii: bootwrapper: add fixup to calc useable mem2 powerpc: gamecube/wii: early debugging using usbgecko powerpc: reserve fixmap entries for early debug powerpc: wii: default config powerpc: wii: platform support powerpc: wii: hollywood interrupt controller support powerpc: broadway processor support powerpc: wii: bootwrapper bits powerpc: wii: device tree powerpc: gamecube: default config powerpc: gamecube: platform support powerpc: gamecube/wii: flipper interrupt controller support powerpc: gamecube/wii: udbg support for usbgecko powerpc: gamecube/wii: do not include PCI support powerpc: gamecube/wii: declare as non-coherent platforms powerpc: gamecube/wii: introduce GAMECUBE_COMMON ... Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c. Hopefully even close to correctly.
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-vmware-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/vmwgfx: Add DRM driver for VMware Virtual GPU drm/vmwgfx: Add svga headers for vmwgfx driver drm/ttm: Add more driver type enums
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6由 Linus Torvalds 提交于
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (34 commits) HWPOISON: Remove stray phrase in a comment HWPOISON: Try to allocate migration page on the same node HWPOISON: Don't do early filtering if filter is disabled HWPOISON: Add a madvise() injector for soft page offlining HWPOISON: Add soft page offline support HWPOISON: Undefine short-hand macros after use to avoid namespace conflict HWPOISON: Use new shake_page in memory_failure HWPOISON: Use correct name for MADV_HWPOISON in documentation HWPOISON: mention HWPoison in Kconfig entry HWPOISON: Use get_user_page_fast in hwpoison madvise HWPOISON: add an interface to switch off/on all the page filters HWPOISON: add memory cgroup filter memcg: add accessor to mem_cgroup.css memcg: rename and export try_get_mem_cgroup_from_page() HWPOISON: add page flags filter mm: export stable page flags HWPOISON: limit hwpoison injector to known page types HWPOISON: add fs/device filters HWPOISON: return 0 to indicate success reliably HWPOISON: make semantics of IGNORED/DELAYED clear ...
-
由 Andi Kleen 提交于
As predicted during code review, the sysctl(2) changes made systems with old glibc nearly unusable. About every command gives a: warning: process `ls' used the deprecated sysctl system call with 1.4 warning in the log. I see this on a SUSE 10.0 system with glibc 2.3.5. Don't warn for this common case. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (117 commits) ACPI processor: Fix section mismatch for processor_add() ACPI: Add platform-wide _OSC support. ACPI: cleanup pci_root _OSC code. ACPI: Add a generic API for _OSC -v2 msi-wmi: depend on backlight and fix corner-cases problems msi-wmi: switch to using input sparse keymap library msi-wmi: replace one-condition switch-case with if statement msi-wmi: remove unused field 'instance' in key_entry structure msi-wmi: remove custom runtime debug implementation msi-wmi: rework init msi-wmi: remove useless includes X86 drivers: Introduce msi-wmi driver Toshiba Bluetooth Enabling driver (RFKill handler v3) ACPI: fix for lapic_timer_propagate_broadcast() acpi_pad: squish warning ACPI: dock: minor whitespace and style cleanups ACPI: dock: add struct dock_station * directly to platform device data ACPI: dock: dock_add - hoist up platform_device_register_simple() ACPI: dock: remove global 'dock_device_name' ACPI: dock: combine add|alloc_dock_dependent_device (v2) ...
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (52 commits) perf record: Use per-task-per-cpu events for inherited events perf record: Properly synchronize child creation perf events: Allow per-task-per-cpu counters perf diff: Percent calcs should use double values perf diff: Change the default sort order to "dso,symbol" perf diff: Use perf_session__fprintf_hists just like 'perf record' perf report: Fix cut'n'paste error recently introduced perf session: Move perf report specific hits out of perf_session__fprintf_hists perf tools: Move hist entries printing routines from perf report perf report: Generalize perf_session__fprintf_hists() perf symbols: Move symbol filtering to event__preprocess_sample() perf symbols: Adopt the strlists for dso, comm perf symbols: Make symbol_conf global perf probe: Fix to show which probe point is not found perf probe: Check symbols in symtab/kallsyms perf probe: Check build-id of vmlinux perf probe: Reject second attempt of adding same-name event perf probe: Support event name for --add option perf probe: Add glob matching support on --del perf probe: Use strlist__for_each macros in probe-event.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (38 commits) direct I/O fallback sync simplification ocfs: stop using do_sync_mapping_range cleanup blockdev_direct_IO locking make generic_acl slightly more generic sanitize xattr handler prototypes libfs: move EXPORT_SYMBOL for d_alloc_name vfs: force reval of target when following LAST_BIND symlinks (try #7) ima: limit imbalance msg Untangling ima mess, part 3: kill dead code in ima Untangling ima mess, part 2: deal with counters Untangling ima mess, part 1: alloc_file() O_TRUNC open shouldn't fail after file truncation ima: call ima_inode_free ima_inode_free IMA: clean up the IMA counts updating code ima: only insert at inode creation time ima: valid return code from ima_inode_alloc fs: move get_empty_filp() deffinition to internal.h Sanitize exec_permission_lite() Kill cached_lookup() and real_lookup() Kill path_lookup_open() ... Trivial conflicts in fs/direct-io.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: rwsem.h need not be included into main.c PM: Remove unnecessary goto from device_resume_noirq() PM: Add initcall_debug style timing for suspend/resume PM: allow for usage_count > 0 in pm_runtime_get()
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix kprobes build with non-gawk awk x86: Split swiotlb initialization into two stages x86: Regex support and known-movable symbols for relocs, fix _end x86, msr: Remove incorrect, duplicated code in the MSR driver x86: Merge kernel_thread() x86: Sync 32/64-bit kernel_thread x86, 32-bit: Use same regs as 64-bit for kernel_thread_helper x86, 64-bit: Use user_mode() to determine new stack pointer in copy_thread() x86, 64-bit: Move kernel_thread to C x86-64, paravirt: Call set_iopl_mask() on 64 bits x86-32: Avoid pipeline serialization in PTREGSCALL1 and 2 x86: Merge sys_clone x86, 32-bit: Convert sys_vm86 & sys_vm86old x86: Merge sys_sigaltstack x86: Merge sys_execve x86: Merge sys_iopl x86-32: Add new pt_regs stubs cpumask: Use modern cpumask style in arch/x86/kernel/cpu/mcheck/mce-inject.c
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix return of trace_dump_stack() ksym_tracer: Fix bad cast tracing/power: Remove two exports tracing: Change event->profile_count to be int type tracing: Simplify trace_option_write() tracing: Remove useless trace option tracing: Use seq file for trace_clock tracing: Use seq file for trace_options function-graph: Allow writing the same val to set_graph_function ftrace: Call trace_parser_clear() properly ftrace: Return EINVAL when writing invalid val to set_ftrace_filter tracing: Move a printk out of ftrace_raw_reg_event_foo() tracing: Pull up calls to trace_define_common_fields() tracing: Extract duplicate ftrace_raw_init_event_foo() ftrace.h: Use common pr_info fmt string tracing: Add stack trace to irqsoff tracer tracing: Add trace_dump_stack() ring-buffer: Move resize integrity check under reader lock ring-buffer: Use sync sched protection on ring buffer resizing tracing: Fix wrong usage of strstrip in trace_ksyms
-
由 Dave Chinner 提交于
The code in xfs_free_buf() only attempts to free the b_pages array if the buffer is a page cache backed or page allocated buffer. The extra log buffer that is used when the log wraps uses pages that are allocated to a different log buffer, but it still has a b_pages array allocated when those pages are associated to with the extra buffer in xfs_buf_associate_memory. Hence we need to always attempt to free the b_pages array when tearing down a buffer, not just on buffers that are explicitly marked as page bearing buffers. This fixes a leak detected by the kernel memory leak code. Signed-off-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
For a long time we've always stored bmap btree records in the 64bit format, so kill off the dead 32bit type, and make sure the 64bit type is named just xfs_bmbt_rec everywhere, without any size postfix. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
Change all async metadata buffers to use [READ|WRITE]_META I/O types so that the I/O doesn't get issued immediately. This allows merging of adjacent metadata requests but still prioritises them over bulk data. This shows a 10-15% improvement in sequential create speed of small files. Don't include the log buffers in this classification - leave them as sync types so they are issued immediately. Signed-off-by: NDave Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-