RSC_VIRTIO_CFG isn't being used, so remove it.

Originally it was introduced to overcome a resource table limitation
that prevented describing a virtio device in a single resource table
entry.

The plan though is to describe resource table entries in a TLV fashion,
where each entry will consume the amount of space it requires,
so the original limitation is anyway temporary.
Reported-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>

Let remoteproc know when the firmware doesn't support any virtio
functionality, so registering a virtio device can be avoided.

This is needed for remote processors that doesn't require any
virtio-based communications, but are still controlled via remoteproc.

[ohad@wizery.com: write commit log]
Signed-off-by: NMark Grosen <mgrosen@ti.com>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>

Not all remote processors employ an IOMMU, so do not error out
on !iommu_present().

Note: we currently still use iommu_present() to tell whether we need
to configure an IOMMU or not. That works for simple cases, but will
easily fail with more complicated ones (e.g. where an IOMMU exists,
but not all remote processors use it). When those use cases show up,
we will solve them by introducing something like remoteproc hw
capabilities.

[ohad@wizery.com: write commit log]
Signed-off-by: NMark Grosen <mgrosen@ti.com>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>

Add an rpmsg driver sample, which demonstrates how to communicate with
an AMP-configured remote processor over the rpmsg bus.

Note how once probed, the driver can immediately start sending messages
using the rpmsg_send() API, without having to worry about creating endpoints
or allocating rpmsg addresses: all that work is done by the rpmsg bus,
and the required information is already embedded in the rpmsg channel
that the driver is probed with.

In this sample, the driver simply sends a "Hello World!" message to the remote
processor repeatedly.

Designed with Brian Swetland <swetland@google.com>.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>

Add a virtio-based inter-processor communication bus, which enables
kernel drivers to communicate with entities, running on remote
processors, over shared memory using a simple messaging protocol.

Every pair of AMP processors share two vrings, which are used to send
and receive the messages over shared memory.

The header of every message sent on the rpmsg bus contains src and dst
addresses, which make it possible to multiplex several rpmsg channels on
the same vring.

Every rpmsg channel is a device on this bus. When a channel is added,
and an appropriate rpmsg driver is found and probed, it is also assigned
a local rpmsg address, which is then bound to the driver's callback.

When inbound messages carry the local address of a bound driver,
its callback is invoked by the bus.

This patch provides a kernel interface only; user space interfaces
will be later exposed by kernel users of this rpmsg bus.

Designed with Brian Swetland <swetland@google.com>.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au> (virtio_ids.h)
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>

Add a remoteproc driver for OMAP4, so we can boot the dual-M3 and
and DSP subsystems.

Use the omap_device_* API to control the hardware state, and utilize
the OMAP mailbox to interrupt the remote processor when a new message
is pending (the mailbox payload is used to tell it which virtqueue was
the message placed in).

Conversely, when an inbound mailbox message arrives, tell the remoteproc
core which virtqueue is triggered.

Later we will also use the mailbox payload to signal omap-specific
events like remote crashes (which will be used to trigger remoteproc
recovery) and power management transitions. At that point we will also
extend the remoteproc core to support this.

Based on (but now quite far from) work done by Fernando Guzman Lugo
<fernando.lugo@ti.com> and Hari Kanigeri <h-kanigeri2@ti.com>.

Designed with Brian Swetland <swetland@google.com>.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>

Create an rpmsg virtio device to allow message-based communication
with the remote processor (but only if supported by its firmware).

There are several advantages to provide this functionality at
the remoteproc-level:
- to support it, platforms only have to provide their own ->kick()
  handler; no need to duplicate the rest of the code.
- the virtio device is created only when the remote processor is
  registered and ready to go. No need to depend on initcall magic.
  moreover, we only add the virtio device if the firmware really
  supports it, and only after we know the supported virtio device features.
- correct device model hierarchy can be set, and that is useful
  for natural power management and DMA API behavior.
- when the remote processor crashes (or removed) we only need
  to remove the virtio device, and the driver core will take care of
  the rest. No need to implement any out-of-bound notifiers.
- we can now easily bind the virtio device to its rproc handle, and
  this way we don't need any name-based remoteproc ->get() API.

Currently we only support creating a single rpmsg virtio device per
remote processor, but later this is going to be extended to support
creating numerous virtio devices of other types too (block, net,
console...).

Designed with Brian Swetland <swetland@google.com>.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>

Expose several remote processor properties (name, state, trace buffer)
that are helpful for debugging.

This part is extracted to a separate patch just to keep the review load
down.

Designed with Brian Swetland <swetland@google.com>.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>

Modern SoCs typically employ a central symmetric multiprocessing (SMP)
application processor running Linux, with several other asymmetric
multiprocessing (AMP) heterogeneous processors running different instances
of operating system, whether Linux or any other flavor of real-time OS.

Booting a remote processor in an AMP configuration typically involves:
- Loading a firmware which contains the OS image
- Allocating and providing it required system resources (e.g. memory)
- Programming an IOMMU (when relevant)
- Powering on the device

This patch introduces a generic framework that allows drivers to do
that. In the future, this framework will also include runtime power
management and error recovery.

Based on (but now quite far from) work done by Fernando Guzman Lugo
<fernando.lugo@ti.com>.

ELF loader was written by Mark Grosen <mgrosen@ti.com>, based on
msm's Peripheral Image Loader (PIL) by Stephen Boyd <sboyd@codeaurora.org>.

Designed with Brian Swetland <swetland@google.com>.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Brian Swetland <swetland@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>

Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/accounting, proc: Fix /proc/stat interrupts sum

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
  x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
  x86/kprobes: Fix typo transferred from Intel manual

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
  x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
  x86/kconfig: Move the ZONE_DMA entry under a menu
  x86/UV2: Add accounting for BAU strong nacks
  x86/UV2: Ack BAU interrupt earlier
  x86/UV2: Remove stale no-resources test for UV2 BAU
  x86/UV2: Work around BAU bug
  x86/UV2: Fix BAU destination timeout initialization
  x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
  x86: Get rid of dubious one-bit signed bitfield

gpio bug fixes for v3.3

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  gpio: tps65910: Use correct offset for gpio initialization
  gpio/it8761e: Restrict it8761e gpio driver to x86.
  gpio-ml-ioh: cleanup __iomem annotation usage
  gpio-ml-ioh: cleanup NULL pointer checking
  gpio-pch: cleanup __iomem annotation usage
  gpio-pch: cleanup NULL pointer checking

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  vfs: remove printk from set_nlink()
  wake up s_wait_unfrozen when ->freeze_fs fails

In checkin

  303395ac x86: Generate system call tables and unistd_*.h from tables

the feature macros in <asm/unistd.h> were unified between 32 and 64
bits.  Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.
Reported-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  MPILIB: Add a missing ENOMEM check

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname
is not going to be NULL, TYVM...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Permit key_serial() to be called with a const key pointer.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Replace the rcu_assign_pointer() calls with rcu_assign_keypointer().
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Fix ima_policy.c sparse "warning: dereference of noderef expression"
message, by accessing cred->uid using current_cred().

Changelog v1:
- Change __cred to just cred (based on David Howell's comment)
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Randy Dunlap reports that we get

  arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
  arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here

when compiling UML for x86-64.

Stephen Rothwell root-caused it and says:

 "Caused by commit d7e7528b ("Audit: push audit success and retcode
  into arch ptrace.h") (another patch that was never in linux-next :-().

  This file now needs protection against double inclusion."

so let's do as the man says.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Analyzed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a missing ENOMEM check.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Set additional sense length field in sense data
  target: Remove legacy device status check from transport_execute_tasks
  target: Remove __transport_execute_tasks() for each processing context
  target: Remove extra se_device->execute_task_lock access in fast path
  target: Drop se_device TCQ queue_depth usage from I/O path
  target: Fix possible NULL pointer with __transport_execute_tasks
  target: Remove TFO->check_release_cmd() fabric API caller
  tcm_fc: Convert ft_send_work to use target_submit_cmd
  target: Add target_submit_cmd() for process context fabric submission
  target: Make target_put_sess_cmd use target_release_cmd_kref
  target: Set response format in INQUIRY response
  target: tcm_mod_builder: small fixups
  Documentation/target: Fix tcm_mod_builder.py build breakage
  target: remove overagressive ____cacheline_aligned annoations
  tcm_loop: bump max_sectors
  target/configs: remove trailing newline from udev_path and alias
  iscsi-target: fix chap identifier simple_strtoul usage
  target: remove useless casts
  target: simplify target_check_cdb_and_preempt
  target: Move core_scsi3_check_cdb_abort_and_preempt
  ...

This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...

This patch fixes an (ACPI S3) suspend regression introduced in commit
68d6e671 ("tpm: Introduce function to poll for result of self test")
and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers
active.

The suspend problem occurred if the TPM was disabled and/or deactivated
and therefore the TPM_PCRRead checking the result of the (asynchronous)
self test returned an error code which then caused the tpm_tis driver to
become inactive and this then seemed to have negatively influenced the
suspend support by the tpm_infineon driver...  Besides that the tpm_tis
drive may stay active even if the TPM is disabled and/or deactivated.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The type of 'make_request_fn' changed in 5a7bbad2 ("block: remove
support for bio remapping from ->make_request"), but the merge of the
nvme driver didn't take that into account, and as a result the driver
would compile with a warning:

  drivers/block/nvme.c: In function 'nvme_alloc_ns':
  drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default]
  include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)'

It's benign, but the warning is annoying.
Reported-by: NStephen Rothwell <sfr@canb.auug.org>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix these warnings:

  drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default]
  drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
  drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default]

And this build error:

  ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined!
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
  i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH
  i2c-eg20t: modified the setting of transfer rate.
  i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number
  i2c: OMAP: Add DT support for i2c controller
  I2C: OMAP: NACK without STP
  I2C: OMAP: correct SYSC register offset for OMAP4

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits)
  [media] as3645a: Fix compilation by including slab.h
  [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c
  [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c
  [media] ds3000: using logical && instead of bitwise &
  [media] v4l2-ctrls: make control names consistent
  [media] DVB: dib0700, add support for Nova-TD LEDs
  [media] DVB: dib0700, add corrected Nova-TD frontend_attach
  [media] DVB: dib0700, separate stk7070pd initialization
  [media] DVB: dib0700, move Nova-TD Stick to a separate set
  [media] : add MODULE_FIRMWARE to dib0700
  [media] DVB-CORE: remove superfluous DTV_CMDs
  [media] s5p-jpeg: adapt to recent videobuf2 changes
  [media] s5p-g2d: fixed a bug in controls setting function
  [media] s5p-mfc: Fix volatile controls setup
  [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test
  [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test
  [media] s5p-fimc: Fix incorrect control ID assignment
  [media] dvb_frontend: Don't call get_frontend() if idle
  [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T
  [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters
  ...

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Wait for WM8993 FLL to stabilise
  ASoC: core - Free platform DAPM context at platform removal.
  ASoC: dapm - Fix check for codec context in dapm_power_widgets().
  ASoC: sgtl5000: update author email address
  ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.

Using the correct gpio offset for setting the initial value
of gpio when setting output direction.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

SCSI updates on 20120118

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits)
  [SCSI] libfc: remove redundant timer init for fcp
  [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c
  [SCSI] libfc: Declare local functions static
  [SCSI] fcoe: fix regression on offload em matching function for initiator/target
  [SCSI] qla4xxx: Update driver version to 5.02.00-k12
  [SCSI] qla4xxx: Cleanup modinfo display
  [SCSI] qla4xxx: Update license
  [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init
  [SCSI] qla4xxx: Added error logging for firmware abort
  [SCSI] qla4xxx: Disable generating pause frames in case of FW hung
  [SCSI] qla4xxx: Temperature monitoring for ISP82XX core.
  [SCSI] megaraid: fix sparse warnings
  [SCSI] sg: convert to kstrtoul_from_user()
  [SCSI] don't change sdev starvation list order without request dispatched
  [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state
  [SCSI] isci: fix start OOB
  [SCSI] isci: fix io failures while wide port links are coming up
  [SCSI] isci: allow more time for wide port targets
  [SCSI] isci: enable wide port targets
  [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode.
  ...

* git://git.infradead.org/users/willy/linux-nvme: (105 commits)
  NVMe: Set number of queues correctly
  NVMe: Version 0.8
  NVMe: Set queue flags correctly
  NVMe: Simplify nvme_unmap_user_pages
  NVMe: Mark the end of the sg list
  NVMe: Fix DMA mapping for admin commands
  NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT
  NVMe: Merge the nvme_bio and nvme_prp data structures
  NVMe: Change nvme_completion_fn to take a dev
  NVMe: Change get_nvmeq to take a dev instead of a namespace
  NVMe: Simplify completion handling
  NVMe: Update Identify Controller data structure
  NVMe: Implement doorbell stride capability
  NVMe: Version 0.7
  NVMe: Don't probe namespace 0
  Fix calculation of number of pages in a PRP List
  NVMe: Create nvme_identify and nvme_get_features functions
  NVMe: Fix memory leak in nvme_dev_add()
  NVMe: Fix calls to dma_unmap_sg
  NVMe: Correct sg list setup in nvme_map_user_pages
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  inetpeer: initialize ->redirect_genid in inet_getpeer()
  net: fix NULL-deref in WARN() in skb_gso_segment()
  net: WARN if skb_checksum_help() is called on skb requiring segmentation
  caif: Remove bad WARN_ON in caif_dev
  caif: Fix typo in Vendor/Product-ID for CAIF modems
  bnx2x: Disable AN KR work-around for BCM57810
  bnx2x: Remove AutoGrEEEn for BCM84833
  bnx2x: Remove 100Mb force speed for BCM84833
  bnx2x: Fix PFC setting on BCM57840
  bnx2x: Fix Super-Isolate mode for BCM84833
  net: fix some sparse errors
  net: kill duplicate included header
  net: sh-eth: Fix build error by the value which is not defined
  net: Use device model to get driver name in skb_gso_segment()
  bridge: BH already disabled in br_fdb_cleanup()
  net: move sock_update_memcg outside of CONFIG_INET
  mwl8k: Fixing Sparse ENDIAN CHECK warning
  ...

ACPI 5.0 provides extensions to the EINJ mechanism to specify the
target for the error injection - by APICID for cpu related errors,
by address for memory related errors, and by segment/bus/device/function
for PCIe related errors. Also extensions for vendor specific error
injections.
Tested-by: NChen Gong <gong.chen@linux.intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>