Remove __init section placement for some functions/data, so that
we don't get section mismatch warnings.

Also make inline function instead of empty setup_summit macro.

[v2]
One of them was not caught by
DEBUG_SECTION_MISMATCH=y
magic. Fix it.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>

Remove __init section placement for some functions, so that we don't
get section mismatch warnings.

[v2]:
2 of them were not caught by
DEBUG_SECTION_MISMATCH=y
magic. Fix it.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>

Perform same-cluster checking even for masks with all (nr_cpu_ids)
bits set and report correct apicid on success instead.

While at it, convert it to for_each_cpu and newer cpumask api.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Perform same-cluster checking even for masks with all (nr_cpu_ids)
bits set and report BAD_APICID on failure.

While at it, convert it to for_each_cpu.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove es7000_cpu_mask_to_apicid_cluster completely, because it's
almost the same as es7000_cpu_mask_to_apicid except 2 code paths.
One of them is about to be removed soon, the another should be
BAD_APICID (it's a fail path).

The _cluster one was not invoked on apic->cpu_mask_to_apicid_and
anyway, since there was no _cluster_and variant.

Also use newer cpumask functions.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The ones which go only into struct apic are de-inlined
by compiler anyway, so remove the inline specifier from them.

Afterwards, remove bigsmp_setup_portio_remap completely as it
is unused.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/kernel/apic/es7000_32.c:702: error: 'es7000_acpi_madt_oem_check_cluster' undeclared here (not in a function)

Provide a es7000_acpi_madt_oem_check_cluster() definition in the !ACPI
case too.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

init_deasserted is only available on SMP. Make the secondary-wakeup
function conditional on SMP.

Also clean up the file some.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

- rename apic->wakeup_cpu  to apic->wakeup_secondary_cpu, to
  make it apparent that this is an SMP-only method

- handle NULL ->wakeup_secondary_cpus to mean the default INIT
  wakeup sequence - this allows simplification of the APIC
  driver templates.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

wakeup_secondary_cpu_via_init(), the default platform method for
booting a secondary CPU, is always used on UP due to probe_32.c,
if CONFIG_X86_LOCAL_APIC is enabled but SMP is off.

So provide a UP wrapper inline as well.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

that is only needed when CONFIG_X86_VSMP is defined with 64bit
also remove dead code about PCI, because CONFIG_X86_VSMP depends on PCI
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

x86_quirks->update_apic() calling looks crazy. so try to remove it:

 1. every apic take wakeup_cpu member directly
 2. separate es7000_apic to es7000_apic_cluster
 3. use uv_wakeup_cpu directly
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Conflicts:
	arch/x86/include/asm/pat.h

Conflicts:
	arch/x86/mach-voyager/voyager_smp.c

Impact: build fix

 ERROR: "reserve_io_memtype_wc" [drivers/gpu/drm/i915/i915.ko] undefined!
 ERROR: "free_io_memtype" [drivers/gpu/drm/i915/i915.ko] undefined!
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This avoids a lockdep warning from:
	if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled)))
		return;
in trace_hardirqs_on_caller();
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make io_mapping_create_wc and io_mapping_free go through PAT to make sure
that there are no memory type aliases.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

io_mapping_create_wc should take a resource_size_t parameter in place of
unsigned long. With unsigned long, there will be no way to map greater than 4GB
address in i386/32 bit.

On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return
error for such a case.

Patch also adds a structure for io_mapping, that saves the base, size and
type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on
io_mapping_map calls.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a function to check and keep identity maps in sync, when changing
any memory type. One of the follow on patches will also use this
routine.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

io_mapping_create_wc can return NULL on error and io_mapping_free() should be
called on one of the error-cleanup path.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- print test pattern instead of pattern number,
- show pattern as stored in memory,
- use proper priority flags,
- consistent use of u64 throughout the code
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: code cleanup
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: code cleanup
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix unexpected behaviour when pattern number is out of range

Current implementation provides 4 patterns for memtest. The code doesn't
check whether the memtest parameter value exceeds the maximum pattern number.

Instead the memtest code pretends to test with non-existing patterns, e.g.
when booting with memtest=10 I've observed the following

  ...
  early_memtest: pattern num 10
  0000001000 - 0000006000 pattern 0
  ...
  0000001000 - 0000006000 pattern 1
  ...
  0000001000 - 0000006000 pattern 2
  ...
  0000001000 - 0000006000 pattern 3
  ...
  0000001000 - 0000006000 pattern 4
  ...
  0000001000 - 0000006000 pattern 5
  ...
  0000001000 - 0000006000 pattern 6
  ...
  0000001000 - 0000006000 pattern 7
  ...
  0000001000 - 0000006000 pattern 8
  ...
  0000001000 - 0000006000 pattern 9
  ...

But in fact Linux didn't test anything for patterns > 4 as the default
case in memtest() is to leave the function.

I suggest to use the memtest parameter as the number of tests to be
performed and to re-iterate over all existing patterns.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: make more types of copies non-temporal

This change makes the following simple fix:

  30d697fa: x86: fix performance regression in write() syscall

A bit more sophisticated: we check the 'total' number of bytes
written to decide whether to copy in a cached or a non-temporal
way.

This will for example cause the tail (modulo 4096 bytes) chunk
of a large write() to be non-temporal too - not just the page-sized
chunks.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, enable future change

Add a 'total bytes copied' parameter to __copy_from_user_*nocache(),
and update all the callsites.

The parameter is not used yet - architecture code can use it to
more intelligently decide whether the copy should be cached or
non-temporal.

Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: defconfig change

Enable MCE in the 32-bit defconfig.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: defconfig change

Enable MCE in the 64-bit defconfig.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: fix PG_locked reporting in /proc/kpageflags

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  Add i2c_board_info for RiscPC PCF8583
  i2c: Make sure i2c_algo_bit_data.timeout is HZ-independent
  i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT
  i2c: Timeouts reach -1
  i2c: Fix misplaced parentheses

Merge branch 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6

* 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firedtv: dvb_frontend_info for FireDTV S2, fix "frequency limits undefined" error
  firedtv: massive refactoring
  firedtv: rename files, variables, functions from firesat to firedtv
  firedtv: Use DEFINE_SPINLOCK
  firedtv: fix registration - adapter number could only be zero
  firedtv: use length_field() of PMT as length
  firedtv: fix returned struct for ca_info
  firedtv: cleanups and minor fixes
  ieee1394: remove superfluous assertions
  ieee1394: inherit ud vendor_id from node vendor_id
  ieee1394: add hpsb_node_read() and hpsb_node_lock()
  ieee1394: use correct barrier types between accesses of nodeid and generation
  firesat: copyrights, rename to firedtv, API conversions, fix remote control input
  firesat: avc resend
  firesat: update isochronous interface, add CI support
  firesat: add DVB-S support for DVB-S2 devices
  firesat: fix DVB-S2 device recognition
  DVB: add firesat driver

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin()
  ext4: Add fallback for find_group_flex

Impact: cleanup

one 32-bit system reports:

BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.0 present.
last_pfn = 0x1c000 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1c000000 @ 7000-c000
..
RAMDISK: 1bc69000 - 1bfef4fa
..
0MB HIGHMEM available.
448MB LOWMEM available.
  mapped low ram: 0 - 1c000000
  low ram: 00000000 - 1c000000
  bootmap 00002000 - 00005800
(9 early reservations) ==> bootmem [0000000000 - 001c000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 00009ed14c]    TEXT DATA BSS ==> [0000400000 - 00009ed14c]
  #4 [001bc69000 - 001bfef4fa]          RAMDISK ==> [001bc69000 - 001bfef4fa]
  #5 [00009ee000 - 00009f2000]    INIT_PG_TABLE ==> [00009ee000 - 00009f2000]
  #6 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  #7 [0000007000 - 0000007000]          PGTABLE
  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]

Notice the strange blank PGTABLE entry.

The reason is init_pg_table is big enough, and zero range is called
with init_memory_mapping/reserve_early().

So try to check the range in reserve_early()

v2: fix the reversed compare
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: nickpiggin@yahoo.com.au
Cc: ink@jurassic.park.msu.ru
Signed-off-by: NIngo Molnar <mingo@elte.hu>