Prepare for implementing GPIO as a platform driver.

Modifies omap_gpio_init() to make use of omap_gpio_chip_init()
and omap_gpio_mod_init(). omap_gpio_mod_init() does the module init
by clearing the status register and initializing the GPIO control register.
omap_gpio_chip_init() initializes the chip request, free, get, set and
other function pointers and sets the gpio irq handler.

This is only to reorganize the code so that the "omap gpio platform driver
implementation patch" looks cleaner and better to review.
Signed-off-by: NCharulatha V <charu@ti.com>
Acked-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Looks like some boards are calling gpio_request from init_irq.
This will make the request_irq fail, as GPIO will be initialized
as postcore_initcall.
Reported-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This should be only selected in CONFIG_ARCH_OMAP2PLUS_TYPICAL
to make it easy to disable.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Using true/false instead of 1/0 to update the free variable.
Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: NJarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Function omap_mcbsp_probe allocates struct omap_mcbsp *mcbsp but it is not
freed in omap_mcbsp_remove. Fix this, remove unneeded structure cleanups
and clk_disable calls since they are not needed here.

This is not problem currently but becomes if the mcbsp driver is ever
modularized.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Value of "isr_reg" pointer is depend on configuration and GPIO method.
Potentially it may have NULL value and it is dereferenced later
in code. Warning and exit from function are added in this case.
Signed-off-by: NEvgeny Kuznetsov <EXT-Eugeny.Kuznetsov@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

In some cases we can get error function `omap2_i2c_add_bus':
arch/arm/plat-omap/i2c.c:136: undefined reference to `omap2_i2c_mux_pins'
arch/arm/plat-omap/i2c.c:141: undefined reference to `omap_hwmod_lookup'
arch/arm/plat-omap/i2c.c:157: undefined reference to `omap_device_build'
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 4d17aeb1 ("OMAP: I2C: split
device registration and convert OMAP2+ to omap_device") broke I2C on
OMAP1.  The following messages appear at boot:

i2c_omap i2c_omap.1: failure requesting irq 0
i2c_omap: probe of i2c_omap.1 failed with error -22

Investigation revealed that a chunk of code is missing from the
original plat-omap/i2c.c file which configured the IRQ and base address
for the I2C block on OMAP1.  Upon adding this back, the OMAP1 I2C block
seems to initialize correctly.

Thanks to Cory Maccarrone <darkstar6262@gmail.com> for reporting the bug,
and apologies for the breakage.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Tested-by: NCory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Merge branch 'pm-hwmod-i2c' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus

Access to some registers depends on register access mode
Three different modes are available for OMAP (at least)
• Operational mode     LCR_REG[7] = 0x0
• Configuration mode A LCR_REG[7] = 0x1 and LCR_REG[7:0]! = 0xBF
• Configuration mode B LCR_REG[7] = 0x1 and LCR_REG[7:0]  = 0xBF

Define access modes and remove redefinitions and magic numbers
in serial drivers (and later in bluetooth driver).
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: NGovindraj.R <govindraj.raja@ti.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Define MDR1 register serial definitions used in serial and
bluetooth drivers.
Change magic number to ones defined in serial_reg for omap1/2
serial driver.
Remove redefined MDR1 register definitions in omap-serial driver.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: NG, Manjunath Kondaiah <manjugk@ti.com>
Acked-by: NGovindraj.R <govindraj.raja@ti.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Craneboard is a hardware development platform based on the
Sitara AM3517 ARM Cortex - A8 microprocessor device. This is a
low cost reference design.

This patch adds basic board file. Detailed support will follow in
subsequent patches.

  [1] http://www.ti.com/arm
  [2] http://www.mistralsolutions.com/products/craneboard.phpSigned-off-by: NSrinath <srinath@mistralsolutions.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patches removes a config option that was used to select a FIQ
handler to be build for Amstrad Delta, as required by the on-board serio
interface driver. Not having any problem reports received since it was
introduced in 2.6.35, the FIQ handler can now be built and initialized by
default, thus reqiring no extra config option.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

It's easier to understand what that number means and
also avoids problems if we ever have to change it.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

They are extremely similar anyway, let's get rid
of one file.

While at that, also remove the empty zoom_config
variable.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The changes are:
  - Use 'for' loop instead 'while' loop.
  - No need to initialize ret to 0, we're assigning it right after.
  - No need to check for onenandcs < GPMC_CS_NUM here, it will always be true.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

omap_board_config_size is implicitly initialized to 0 in
plat-omap/common.c, get_config() won't dereference omap_board_config,
so we can remove the empty igep2_config array.
Signed-off-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Use call_rcu_sched() for pagetables

PowerPC relies on IRQ-disable to guard against RCU quiecent states,
use the appropriate RCU call version.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This reverts commit e0fdace1.

On-list discussion seems to suggest that the robustness fixes for printk
make this unnecessary and DaveM has also agreed in person at Kernel Summit
and on list.

The main problem with this code is once we hit a lockdep splat we always
keep oops_in_progress set, the console layer uses oops_in_progress with KMS
to decide when it should be showing the oops and not showing X, so it causes
problems around suspend/resume time when a userspace resume can cause a console
switch away from X, only if oops_in_progress is set (which is what we want
if an oops actually is in progress, but not because we had a lockdep splat
2 days prior).

Cc: David S Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  tpm: Autodetect itpm devices

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  af_unix: limit recursion level
  pch_gbe driver: The wrong of initializer entry
  pch_gbe dreiver: chang author
  ucc_geth: fix ucc halt problem in half duplex mode
  inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners
  ehea: Add some info messages and fix an issue
  hso: fix disable_net
  NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty
  cxgb4vf: fix setting unicast/multicast addresses ...
  net, ppp: Report correct error code if unit allocation failed
  DECnet: don't leak uninitialized stack byte
  au1000_eth: fix invalid address accessing the MAC enable register
  dccp: fix error in updating the GAR
  tcp: restrict net.ipv4.tcp_adv_win_scale (#20312)
  netns: Don't leak others' openreq-s in proc
  Net: ceph: Makefile: Remove unnessary code
  vhost/net: fix rcu check usage
  econet: fix CVE-2010-3848
  econet: fix CVE-2010-3850
  econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849
  ...

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled
  OMAP: UART: don't resume UARTs that are not enabled.

Some Lenovos have TPMs that require a quirk to function correctly. This can
be autodetected by checking whether the device has a _HID of INTC0102. This
is an invalid PNPid, and as such is discarded by the pnp layer - however
it's still present in the ACPI code, so we can pull it out that way. This
means that the quirk won't be automatically applied on non-ACPI systems,
but without ACPI we don't have any way to identify the chip anyway so I
don't think that's a great concern.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>
Tested-by: NJiri Kosina <jkosina@suse.cz>
Tested-by: NAndy Isaacson <adi@hexapodia.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits)
  Btrfs: don't use migrate page without CONFIG_MIGRATION
  Btrfs: deal with DIO bios that span more than one ordered extent
  Btrfs: setup blank root and fs_info for mount time
  Btrfs: fix fiemap
  Btrfs - fix race between btrfs_get_sb() and umount
  Btrfs: update inode ctime when using links
  Btrfs: make sure new inode size is ok in fallocate
  Btrfs: fix typo in fallocate to make it honor actual size
  Btrfs: avoid NULL pointer deref in try_release_extent_buffer
  Btrfs: make btrfs_add_nondir take parent inode as an argument
  Btrfs: hold i_mutex when calling btrfs_log_dentry_safe
  Btrfs: use dget_parent where we can UPDATED
  Btrfs: fix more ESTALE problems with NFS
  Btrfs: handle NFS lookups properly
  btrfs: make 1-bit signed fileds unsigned
  btrfs: Show device attr correctly for symlinks
  btrfs: Set file size correctly in file clone
  btrfs: Check if dest_offset is block-size aligned before cloning file
  Btrfs: handle the space_cache option properly
  btrfs: Fix early enospc because 'unused' calculated with wrong sign.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Fix typos in Documentation/edac.txt
  EDAC, MCE: Fix edac_init_mce_inject error handling
  EDAC: Remove deprecated kbuild goal definitions

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Userland expects quota limit/warn/usage in 512b blocks

Its easy to eat all kernel memory and trigger NMI watchdog, using an
exploit program that queues unix sockets on top of others.

lkml ref : http://lkml.org/lkml/2010/11/25/8

This mechanism is used in applications, one choice we have is to have a
recursion limit.

Other limits might be needed as well (if we queue other types of files),
since the passfd mechanism is currently limited by socket receive queue
sizes only.

Add a recursion_level to unix socket, allowing up to 4 levels.

Each time we send an unix socket through sendfd mechanism, we copy its
recursion level (plus one) to receiver. This recursion level is cleared
when socket receive queue is emptied.
Reported-by: NМарк Коренберг <socketpair@gmail.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The wrong of initializer entry was modified.
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Reported-by: NDr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake".
I update the Kconfig, renamed "Topcliff" to "EG20T".
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes compile error
Signed-off-by: NChris Mason <chris.mason@oracle.com>

In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size),
the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation
of the QE Reference Manual.  But that will sometimes cause tx halt
while working in half duplex mode.

According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO
threshold size can cause UCC to halt), setting UTFTT less than
[(UTFS x (M - 8)/M) - 128] will prevent this from happening
(M is the minimum buffer size).

The patch changes UTFTT back to 256.
Signed-off-by: NLi Yang <leoli@freescale.com>
Cc: Jean-Denis Boyer <jdboyer@media5corp.com>
Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

inet sockets corresponding to passive connections are added to the bind hash
using ___inet_inherit_port(). These sockets are later removed from the bind
hash using __inet_put_port(). These two functions are not exactly symmetrical.
__inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas
___inet_inherit_port() does not increment them. This results in both of these
going to -ve values.

This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(),
which does the right thing.

'bsockets' and 'num_owners' were introduced by commit a9d8f911
(inet: Allowing more than 64k connections and heavily optimize bind(0))
Signed-off-by: NNagendra Singh Tomar <tomer_iisc@yahoo.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds some debug information about ehea not being able to
allocate enough spaces. Also it correctly updates the amount of available
skb.
Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new DIO bio splitting code has problems when the bio
spans more than one ordered extent.  This will happen as the
generic DIO code merges our get_blocks calls together into
a bigger single bio.

This fixes things by walking forward in the ordered extent
code finding all the overlapping ordered extents and completing them
all at once.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This avoids some include-file hell, and the function isn't really
important enough to be inlined anyway.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

And in particular, use it in 'pipe_fcntl()'.

The other pipe functions do not need to use the 'careful' version, since
they are only ever called for things that are already known to be pipes.

The normal read/write/ioctl functions are called through the file
operations structures, so if a file isn't a pipe, they'd never get
called.  But pipe_fcntl() is special, and called directly from the
generic fcntl code, and needs to use the same careful function that the
splice code is using.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>