- 23 5月, 2005 10 次提交
-
-
由 Andrew Victor 提交于
This patch replaces the current CONFIG_JFFS2_FS_NAND, CONFIG_JFFS2_FS_NOR_ECC and CONFIG_JFFS2_FS_DATAFLASH with a single configuration option - CONFIG_JFFS2_FS_WRITEBUFFER. The only functional change of this patch is that the slower div/mod calculations for SECTOR_ADDR(), PAGE_DIV() and PAGE_MOD() are now always used when CONFIG_JFFS2_FS_WRITEBUFFER is enabled. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andrew Victor 提交于
For Dataflash, can_mark_obsolete = false and the NAND write buffering code (wbuf.c) is used. Since the DataFlash chip will automatically erase pages when writing, the cleanmarkers are not needed - so cleanmarker_oob = false and cleanmarker_size = 0 DataFlash page-sizes are not a power of two (they're multiples of 528 bytes). The SECTOR_ADDR macro (added in the previous core patch) is replaced with a (slower) div/mod version if CONFIG_JFFS2_FS_DATAFLASH is selected. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andrew Victor 提交于
DataFlash page-sizes are not a power of two (they're multiples of 528 bytes). There are a few places in JFFS2 code where sector_size is used as a bitmask. A new macro (SECTOR_ADDR) was defined to calculate these sector addresses. For non-DataFlash devices, the original (faster) bitmask operation is still used. In scan.c, the EMPTY_SCAN_SIZE was a constant of 1024. Since this could be larger than the sector size of the DataFlash, this is now basically set to MIN(sector_size, 1024). Addition of a jffs2_is_writebuffered() macro. Signed-off-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Estelle Hammache 提交于
Prevent deadlock when checking erased block for space allocation during wbuf recovery. Signed-off-by: NEstelle Hammache <estelle.hammache@st.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David Woodhouse 提交于
make NAND code work on NOR flash again Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Estelle Hammache 提交于
Code beautification and block filing correction for optimization. Signed-off-by: NEstelle Hammache <estelle.hammache@st.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Estelle Hammache 提交于
avoid segfault when nextblock was refiled because of a write failure - avoid filing blocks on the clean list when they have wasted space Signed-off-by: NEstelle Hammache <estelle.hammache@st.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Estelle Hammache 提交于
- block refiling when writing directly to flash a buffer which is bigger than wbuf - retry cases for flushing wbuf Signed-off-by: NEstelle Hammache <estelle.hammache@st.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Estelle Hammache 提交于
Correction of retry case to avoid silent failure of rmdir when jffs2_wbuf_recover GCs the previous entry (+ corresponding dnode case). Signed-off-by: NEstelle Hammache <estelle.hammache@st.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Todd Poynor 提交于
Avoid "Eep. No valid nodes for ino #1" message for just-created filesystem. Signed-off-by: NTodd Poynor <tpoynor@mvista.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 19 5月, 2005 1 次提交
-
-
由 Stephen Tweedie 提交于
Avoid console spam with ext3 aborted journal. ext3 usually reports error conditions that it detects in its environment. But when its journal gets aborted due to such errors, it can sometimes continue to report that condition forever, spamming the console to such an extent that the initial first cause of the journal abort can be lost. When the journal aborts, we put the filesystem into readonly mode. Most subsequent filesystem operations will get rejected immediately by checks for MS_RDONLY either in the filesystem or in the VFS. But some paths do not have such checks --- for example, if we continue to write to a file handle that was opened before the fs went readonly. (We only check for the ROFS condition when the file is first opened.) In these cases, we can continue to generate log errors similar to EXT3-fs error (device $DEV) in start_transaction: Journal has aborted for each subsequent write. There is really no point in generating these errors after the initial error has been fully reported. Specifically, if we're starting a completely new filesystem operation, and the filesystem is *already* readonly (ie. the ext3 layer has already detected and handled the underlying jbd abort), and we see an EROFS error, then there is simply no point in reporting it again. Signed-off-by: NStephen Tweedie <sct@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 5月, 2005 3 次提交
-
-
由 Andrew Morton 提交于
If block_read_full_page() detects an error when running get_block() it will run SetPageError(), then it will zero out the block in pagecache and will mark the buffer_head uptodate. So at the end of readahead we end up with a non-uptodate pagecache page which is marked PageError. But it has uptodate buffers. The pagefault code will run ClearPageError, will launch readpage a second time and block_read_full_page() will notice the uptodate buffers and will mark the page uptodate as well. We end up with an uptodate, !PageError page full of zeros and the error is lost. (It seems a little odd that filemap_nopage() runs ClearPageError(). I guess all of this adds up to meaning that for each attempted access to the page, the pagefault handler will retry the I/O. Which is good and bad. If the app is ignoring SIGBUS for some reason we could get a lot of back-to-back I/O errors.) Fix it by not marking the pagecache buffer_head as uptodate if the attempt to map that buffer to a disk block failed. Credit-to: Qu Fuping <fs@ercist.iscas.ac.cn> For reporting the bug and identifying its source. Signed-off-by: NQu Fuping <fs@ercist.iscas.ac.cn> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
VmallocTotal: 34359738367 kB VmallocUsed: 266288 kB VmallocChunk: 18014366299193295 kB is unsettling - x86_64 and some other architectures keep a separate address range for modules in vmalloc's vmlist, which /proc/meminfo should pass over. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Kroah-Hartman 提交于
As reported by Paul Starzetz <ihaquer@isec.pl> Reference: CAN-2005-1263 Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 07 5月, 2005 1 次提交
-
-
由 Andrew Morton 提交于
This change from March 3rd causes the partition parsing code to ignore partitions which have a signature byte of zero. Turns out that more people have such partitions than we expected, and their device numbering is coming up wrong in post-2.6.11 kernels. So revert the change while we think about the problem a bit more. Cc: Andries Brouwer <Andries.Brouwer@cwi.nl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 5月, 2005 25 次提交
-
-
由 Adrian Bunk 提交于
This patch fixes an off by one error found by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Add some comments about task->comm, to explain what it is near its definition and provide some important pointers to its uses. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy.Dunlap 提交于
Use NULL instead of 0 for pointer (sparse warning): fs/reiserfs/namei.c:611:50: warning: Using plain integer as NULL pointer Signed-off-by: NRandy Dunlap <rddunlap@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This patch makes some needlessly global identifiers static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NArjan van de Ven <arjanv@infradead.org> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
This had a fatal lock ranking bug: we do journal_start outside mpage_writepages()'s lock_page(). Revert the whole thing, think again. Credit-to: Jan Kara <jack@suse.cz> For identifying the bug. Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
The only caller that ever sets it can call fsync_bdev itself easily. Also update some comments. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
There's no longer a reason to document the obsolete BK usage. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
The `last_bh' logic probably isn't worth much. In those situations where only the front part of the page is being written out we will save some looping but in the vastly more common case of an all-page writeout if just adds more code. Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Remove all those get_bh()'s and put_bh()'s by extending lock_page() to cover the troublesome regions. (get_bh() and put_bh() happen every time whereas contention on a page's lock in there happens basically never). Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
When running fsstress -v -d $DIR/tmp -n 1000 -p 1000 -l 2 on an ext2 filesystem with 1024 byte block size, on SMP i386 with 4096 byte page size over loopback to an image file on a tmpfs filesystem, I would very quickly hit BUG_ON(!buffer_async_write(bh)); in fs/buffer.c:end_buffer_async_write It seems that more than one request would be submitted for a given bh at a time. What would happen is the following: 2 threads doing __mpage_writepages on the same page. Thread 1 - lock the page first, and enter __block_write_full_page. Thread 1 - (eg.) mark_buffer_async_write on the first 2 buffers. Thread 1 - set page writeback, unlock page. Thread 2 - lock page, wait on page writeback Thread 1 - submit_bh on the first 2 buffers. => both requests complete, none of the page buffers are async_write, end_page_writeback is called. Thread 2 - wakes up. enters __block_write_full_page. Thread 2 - mark_buffer_async_write on (eg.) the last buffer Thread 1 - finds the last buffer has async_write set, submit_bh on that. Thread 2 - submit_bh on the last buffer. => oops. So change __block_write_full_page to explicitly keep track of the last bh we need to issue, so we don't touch anything after issuing the last request. Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Fix a race where __block_prepare_write can leak out an in-flight read against a bh if get_block returns an error. This can lead to the page becoming unlocked while the buffer is locked and the read still in flight. __mpage_writepage BUGs on this condition. BUG sighted on a 2-way Itanium2 system with 16K PAGE_SIZE running fsstress -v -d $DIR/tmp -n 1000 -p 1000 -l 2 where $DIR is a new ext2 filesystem with 4K blocks that is quite small (causing get_block to fail often with -ENOSPC). Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Dike 提交于
This cleans up the error handling and fixes a crash if a hostfs mount fails. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrea Arcangeli 提交于
This makes sure that reclaimable buffer headers and reclaimable inodes are accounted properly during the overcommit checks. Signed-off-by: NAndrea Arcangeli <andrea@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nathan Scott 提交于
SGI Modid: xfs-linux:xfs-kern:22378a Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Nathan Scott 提交于
[XFS] Use the right offset when ensuring a delayed allocate conversion has covered the offset originally requested. Can cause data corruption when multiple processes are performing writeout on different areas of the same file. Quite difficult to hit though. SGI Modid: xfs-linux:xfs-kern:22377a Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com> .
-
由 Nathan Scott 提交于
SGI Modid: xfs-linux:xfs-kern:22376a Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Eric Sandeen 提交于
SGI Modid: xfs-linux:xfs-kern:191625a Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Daniel Moore 提交于
SGI Modid: xfs-linux:xfs-kern:191586a Signed-off-by: NDaniel Moore <dxm@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Nathan Scott 提交于
handling for unwritten extents can be moved out of interrupt context. SGI Modid: xfs-linux:xfs-kern:22343a Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Nathan Scott 提交于
SGI Modid: xfs-linux:xfs-kern:22342a Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Eric Sandeen 提交于
SGI Modid: xfs-linux:xfs-kern:191411a Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Nathan Scott 提交于
SGI Modid: xfs-linux:xfs-kern:22261a Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-
由 Dean Roehrich 提交于
SGI Modid: xfs-linux:xfs-kern:190711a Signed-off-by: NDean Roehrich <roehrich@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com> .
-
由 Eric Sandeen 提交于
SGI Modid: xfs-linux:xfs-kern:190725a Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com> .
-
由 Nathan Scott 提交于
SGI Modid: xfs-linux:xfs-kern:22032a Signed-off-by: NNathan Scott <nathans@sgi.com> Signed-off-by: NChristoph Hellwig <hch@sgi.com>
-