Many common initializations of struct policy are moved to core now and hence
this driver doesn't need to do it. This patch removes such code.

Most recent of those changes is to call ->get() in the core after calling
->init().
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Most of the CPUFreq drivers do similar things in .exit() and .verify() routines
and .attr. So its better if we have generic routines for them which can be used
by cpufreq drivers then.

This patch uses the generic verify routine in the ACPI driver.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Lets use cpufreq_table_validate_and_show() instead of calling
cpufreq_frequency_table_cpuinfo() and cpufreq_frequency_table_get_attr().
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If the hw supports intel_pstate and acpi_cpufreq, intel_pstate will
get loaded first.

acpi_cpufreq_init() will call acpi_cpufreq_early_init()
and that will allocate perf data and init those perf data in ACPI core,
(that will cover all CPUs). But later it will free them as
cpufreq_register_driver(acpi_cpufreq) will fail as intel_pstate is
already registered

Use cpufreq_get_current_driver() to check if we can skip the
acpi_cpufreq loading.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Standardise the defintion of the cpb (Core Performance Boost)
attribute in the acpi-cpufreq driver via the cpufreq_freq_attr_rw
macro.

[rjw: Subject and changelog]
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

We don't need to set .owner = THIS_MODULE any more in cpufreq drivers
as this field isn't used any more by the cpufreq core.

This patch removes it and updates all dependent drivers accordingly.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Chapter 14 of Documentation/CodingStyle says:

The preferred form for passing a size of a struct is the following:

	p = kmalloc(sizeof(*p), ...);

The alternative form where struct name is spelled out hurts
readability and introduces an opportunity for a bug when the pointer
variable type is changed but the corresponding sizeof that is passed
to a memory allocator is not.

This wasn't followed consistently in drivers/cpufreq, let's make it
more consistent by always following this rule.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The target frequency calculation method in the ondemand governor has
changed and it is now independent of the measured average frequency.
Consequently, the APERF/MPERF support in cpufreq is not used any
more, so drop it.

[rjw: Changelog]
Signed-off-by: NStratos Karafotis <stratosk@semaphore.gr>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commits fcf80582 (cpufreq: Simplify cpufreq_add_dev()) and aa77a527
(cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init())
changed the contents of the "related_cpus" sysfs attribute on systems
where acpi-cpufreq is used and user space can't get the list of CPUs
which are in the same hardware coordination CPU domain (provided by
the ACPI AML method _PSD) via "related_cpus" any more.

To make up for that loss add a new sysfs attribute "freqdomian_cpus"
for the acpi-cpufreq driver which exposes the list of CPUs in the
same domain regardless of whether it is coordinated by hardware or
software.

[rjw: Changelog, documentation]
References: https://bugzilla.kernel.org/show_bug.cgi?id=58761Reported-by: NJean-Philippe Halimi <jean-philippe.halimi@exascale-computing.eu>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

PRECHANGE and POSTCHANGE notifiers must be called in groups, i.e either both
should be called or both shouldn't be.

In case we have started PRECHANGE notifier and found an error, we
must call POSTCHANGE notifier with freqs.new = freqs.old to
guarantee that the sequence of calling notifiers is complete.

This patch fixes it.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

After commit ac212b69 (ACPI / processor: Use common hotplug
infrastructure) the acpi-cpufreq module is not loaded automatically
by udev which fails to match it against the x86cpu modalias.  Still,
it can be matched against ACPI processor device IDs, which even
makes more sense, because it depends on the ACPI processor driver
that uses those device IDs to bind to processor devices.

For this reason, add ACPI processor device IDs to acpi-cpufreq.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

Commit 4b31e774 (Always set P-state on initialization) fixed bug
#4634 and caused the driver to always set the target P-State at
least once since the initial P-State may not be the desired one.
Commit 5a1c0228 (cpufreq: Avoid calling cpufreq driver's target()
routine if target_freq == policy->cur) caused a regression in
this behavior.

This fixes the regression by setting policy->cur based on the CPU's
target frequency rather than the CPU's current reported frequency
(which may be different).  This means that the P-State will be set
initially if the CPU's target frequency is different from the
governor's target frequency.

This fixes an issue where setting the default governor to
performance wouldn't correctly enable turbo mode on all cores.
Signed-off-by: NRoss Lagerwall <rosslagerwall@gmail.com>
Reviewed-by: NLen Brown <len.brown@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.8+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The "index" field of struct cpufreq_frequency_table was never an
index and isn't used at all by the cpufreq core.  It only is useful
for cpufreq drivers for their internal purposes.

Many people nowadays blindly set it in ascending order with the
assumption that the core will use it, which is a mistake.

Rename it to "driver_data" as that's what its purpose is. All of its
users are updated accordingly.

[rjw: Changelog]
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When we don't have any file in cpu/cpufreq directory we shouldn't
create it. Specially with the introduction of per-policy governor
instance patchset, even governors are moved to
cpu/cpu*/cpufreq/governor-name directory and so this directory is
just not required.

Lets have it only when required.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

policy->cpus contains all online cpus that have single shared clock line. And
their frequencies are always updated together.

Many SMP system's cpufreq drivers take care of this in individual drivers but
the best place for this code is in cpufreq core.

This patch modifies cpufreq_notify_transition() to notify frequency change for
all cpus in policy->cpus and hence updates all users of this API.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

With the addition of following patch:

fcf80582 cpufreq: Simplify cpufreq_add_dev()

cpufreq driver's .init() routine must initialize policy->cpus with
mask of all possible CPUs (Online + Offline) that share the clock.
Then the core would copy this mask onto policy->related_cpus and will
reset policy->cpus to carry only online cpus.

acpi-cpufreq driver wasn't updated with this assumption and so
sometimes when we try to hot[un]plug CPUs at run time, sysfs
directories get corrupted.

This patch fixes acpi-cpufreq driver against this corruption.
Reported-and-tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com>
Tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Implement a generic helper function policy_is_shared() to replace the
current dbs_sw_coordinated_cpus() at cpufreq level, so that it can be
used by code other than cpufreq governors.
Suggested-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NFabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

de3ed81d ("[CPUFREQ] Change link order of x86 cpufreq modules")
changed cpufreq drivers link order so that powernow-k8 gets loaded first
due to earlier K8s having BIOS bugs.

However, now that acpi-cpufreq supports both AMD and Intel CPUs with HW
P-states, we want to load it first, so that cases where acpi-cpufreq and
powernow-k8 are both built-in and powernow-k8 initializing first, can be
addressed.

So, make sure that even if acpi-cpufreq gets loaded first, it errors out
on K8s and powernow-k8 can be loaded then successfully.
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
References: http://lkml.kernel.org/r/20130118162347.GA31499@srcf.ucam.orgSigned-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The acpi core will call request_module("acpi-cpufreq") on subsystem init,
but this will fail if the module isn't available at that stage of boot.
Add some module aliases to ensure that udev can load the module on Intel
and AMD systems with the appropriate feature bits - I /think/ that this
will also work on VIA systems, but haven't verified that.

References: http://lkml.kernel.org/r/1448223.sdUJnNSRz4@vostro.rjw.lanSigned-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
Tested-by: NLeonid Isaev <lisaev@umail.iu.edu>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: 3.7+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The powernow-k8 driver supported a sysfs knob called "cpb", which was
instantiated per CPU, but actually acted globally for the whole
system. To keep some compatibility with this feature, we re-introduce
this behavior here, but:
a) only enable it on AMD CPUs and
b) protect it with a Kconfig switch

I'd like to consider this feature obsolete. Lets keep it around for
some kernel versions and then phase it out.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

One feature present in powernow-k8 that isn't present in acpi-cpufreq
is support for enabling or disabling AMD's core performance boost
technology. This patch adds support to acpi-cpufreq, but also
includes support for Intel's dynamic acceleration.

The original boost disabling sysfs file was per CPU, but acted
globally. Also the naming (cpb) was at least not intuitive.
So lets introduce a single file simply called "boost", which sits
once in /sys/devices/system/cpu/cpufreq.
This should be the only way of using this feature, so add
documentation about the rationale and the usage.

A following patch will re-introduce the cpb knob for compatibility
reasons on AMD CPUs.

Per-CPU boost switching is possible, but not trivial and is thus
postponed to a later patch series.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

To workaround some Windows specific behavior, the ACPI _PSD table
on AMD desktop boards advertises all cores as dependent, meaning
that they all can only use the same P-state. acpi-cpufreq strictly
obeys this description, instantiating one CPU only and symlinking
the others. But the hardware can have distinct frequencies for each
core and powernow-k8 did it that way.
So, in order to use the hardware to its full potential and keep the
original powernow-k8 behavior, lets override the _PSD table setting
on AMD hardware.
We use the siblings table, as it matches the current hardware
behavior.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The programming model for P-states on modern AMD CPUs is very similar to
that of Intel and VIA. It makes sense to consolidate this support into one
driver rather than duplicating functionality between two of them. This
patch adds support for AMDs with hardware P-state control to acpi-cpufreq.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

acpi-cpufreq checks each CPU for aperf/mperf support, but only sets a
global flag. This will cause errors if some CPUs in the system don't
support the feature. Check boot_cpu_has() instead in order to make sure
that all CPUs support it.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NDave Jones <davej@redhat.com>

I came across a memory leak during a cyclic cpu-online-offline test.
Signed-off-by: NYu Luming <luming.yu@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Signed-off-by: NDave Jones <davej@redhat.com>

With dynamic debug having gained the capability to report debug messages
also during the boot process, it offers a far superior interface for
debug messages than the custom cpufreq infrastructure. As a first step,
remove the old cpufreq_debug_printk() function and replace it with a call
to the generic pr_debug() function.

How can dynamic debug be used on cpufreq? You need a kernel which has
CONFIG_DYNAMIC_DEBUG enabled.

To enabled debugging during runtime, mount debugfs and

$ echo -n 'module cpufreq +p' > /sys/kernel/debug/dynamic_debug/control

for debugging the complete "cpufreq" module. To achieve the same goal during
boot, append

	ddebug_query="module cpufreq +p"

as a boot parameter to the kernel of your choice.

For more detailled instructions, please see
Documentation/dynamic-debug-howto.txt
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NDave Jones <davej@redhat.com>

We didn't free per_cpu(acfreq_data, cpu)->freq_table
when acpi_freq driver is unloaded.

Resulting in the following messages in /sys/kernel/debug/kmemleak:

unreferenced object 0xf6450e80 (size 64):
  comm "modprobe", pid 1066, jiffies 4294677317 (age 19290.453s)
  hex dump (first 32 bytes):
    00 00 00 00 e8 a2 24 00 01 00 00 00 00 9f 24 00  ......$.......$.
    02 00 00 00 00 6a 18 00 03 00 00 00 00 35 0c 00  .....j.......5..
  backtrace:
    [<c123ba97>] kmemleak_alloc+0x27/0x50
    [<c109f96f>] __kmalloc+0xcf/0x110
    [<f9da97ee>] acpi_cpufreq_cpu_init+0x1ee/0x4e4 [acpi_cpufreq]
    [<c11cd8d2>] cpufreq_add_dev+0x142/0x3a0
    [<c11920b7>] sysdev_driver_register+0x97/0x110
    [<c11cce56>] cpufreq_register_driver+0x86/0x140
    [<f9dad080>] 0xf9dad080
    [<c1001130>] do_one_initcall+0x30/0x160
    [<c10626e9>] sys_init_module+0x99/0x1e0
    [<c1002d97>] sysenter_do_call+0x12/0x26
    [<ffffffff>] 0xffffffff

https://bugzilla.kernel.org/show_bug.cgi?id=15807#c21Tested-by: NToralf Forster <toralf.foerster@gmx.de>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_perf_data is a percpu pointer but was missing __percpu markup.
Add it.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDave Jones <davej@redhat.com>

acpi_perf_data is a percpu pointer but was missing __percpu markup.
Add it.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDave Jones <davej@redhat.com>

and fix the broken case if a core's frequency depends on others.

trace_power_frequency was only implemented in a rather ungeneric way
in acpi-cpufreq driver's target() function only.
-> Move the call to trace_power_frequency to
   cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
   notifier is triggered.
   This will support power frequency tracing by all cpufreq drivers

trace_power_frequency did not trace frequency changes correctly when
the userspace governor was used or when CPU cores' frequency depend
on each other.
-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
   which gets switched automatically fixes this.

Robert Schoene provided some important fixes on top of my initial
quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: davej@redhat.com
CC: arjan@infradead.org
CC: linux-kernel@vger.kernel.org
CC: robert.schoene@tu-dresden.de
Tested-by: robert.schoene@tu-dresden.de
Signed-off-by: NDave Jones <davej@redhat.com>

Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: venki@google.com
CC: davej@redhat.com
CC: arjan@infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: NDave Jones <davej@redhat.com>

and fix the broken case if a core's frequency depends on others.

trace_power_frequency was only implemented in a rather ungeneric
way in acpi-cpufreq driver's target() function only.

-> Move the call to trace_power_frequency to
   cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
   notifier is triggered.
   This will support power frequency tracing by all cpufreq
   drivers.

trace_power_frequency did not trace frequency changes correctly
when the userspace governor was used or when CPU cores'
frequency depend on each other.

-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
   which gets switched automatically fixes this.

Robert Schoene provided some important fixes on top of my
initial quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id

[akpm@linux-foundation.org: build fix]
Signed-off-by: NThomas Renninger <trenn@suse.de>
Cc: davej@codemonkey.org.uk
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Acked-by: NArjan van de Ven <arjan@infradead.org>
Cc: Robert Schoene <robert.schoene@tu-dresden.de>
Tested-by: NRobert Schoene <robert.schoene@tu-dresden.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Starting with model 10 of Family 0x10, AMD processors may have
support for APERF/MPERF.  Add support for identifying it and using
it within cpufreq.  Move the APERF/MPERF functions out of the
acpi-cpufreq code and into their own file so they can easily be
shared.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
LKML-Reference: <20100401141956.GA1930@aftab>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Reviewed-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: avoid cross-CPU interrupts by using smp_call_function_any()

Presently acpi-cpufreq will perform the MSR read on the first CPU in the
mask.  That's inefficient if that CPU differs from the current CPU.
Because we have to perform a cross-CPU call, but we could have run the
rdmsr on the current CPU.

So switch to using the new smp_call_function_any(), which will perform the
call on the current CPU if that CPU is present in the mask (it is).

Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This interface is mainly intended (and implemented) for ACPI _PPC BIOS
frequency limitations, but other cpufreq drivers can also use it for
similar use-cases.

Why is this needed:

Currently it's not obvious why cpufreq got limited.
People see cpufreq/scaling_max_freq reduced, but this could have
happened by:
  - any userspace prog writing to scaling_max_freq
  - thermal limitations
  - hardware (_PPC in ACPI case) limitiations

Therefore export bios_limit (in kHz) to:
  - Point the user that it's the BIOS (broken or intended) which limits
    frequency
  - Export it as a sysfs interface for userspace progs.
    While this was a rarely used feature on laptops, there will appear
    more and more server implemenations providing "Green IT" features like
    allowing the service processor to limit the frequency. People want
    to know about HW/BIOS frequency limitations.

All ACPI P-state driven cpufreq drivers are covered with this patch:
  - powernow-k8
  - powernow-k7
  - acpi-cpufreq

Tested with a patched DSDT which limits the first two cores (_PPC returns 1)
via _PPC, exposed by bios_limit:
# echo 2200000 >cpu2/cpufreq/scaling_max_freq
# cat cpu*/cpufreq/scaling_max_freq
2600000
2600000
2200000
2200000
# #scaling_max_freq shows general user/thermal/BIOS limitations

# cat cpu*/cpufreq/bios_limit
2600000
2600000
2800000
2800000
# #bios_limit only shows the HW/BIOS limitation

CC: Pallipadi Venkatesh <venkatesh.pallipadi@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: davej@codemonkey.org.uk
CC: linux@dominikbrodowski.net
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NDave Jones <davej@redhat.com>

Removing the SMT/HT check, since the Errata doesn't mention
Hyper-Threading.

Adding in a printk, so that the user knows why acpi-cpufreq refuses to
load.  Also, once system is blacklisted, don't repeat checks to see if
blacklisted.  This also causes the message to only be printed once,
rather than for each CPU.
Signed-off-by: NJohn L. Villalovos <john.l.villalovos@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch updates percpu related symbols in cpufreq such that percpu
symbols are unique and don't clash with local symbols.  This serves
two purposes of decreasing the possibility of global percpu symbol
collision and allowing dropping per_cpu__ prefix from percpu symbols.

* drivers/cpufreq/cpufreq.c: s/policy_cpu/cpufreq_policy_cpu/
* drivers/cpufreq/freq_table.c: s/show_table/cpufreq_show_table/
* arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c: s/drv_data/acfreq_data/
  					      s/old_perf/acfreq_old_perf/

Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>

This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".

This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>