- 20 2月, 2009 6 次提交
-
-
由 Takashi Iwai 提交于
Replace the accessor to pin defaults with the common code for caching. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Removed its own save/restore functions and replaced with the common code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Now it's done in the common code. Also use the common access functions for pin defaults. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the generic pincfg cache and save/restore functions. Also introduced the pin-overriding via hwdep sysfs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Fixed the parse of init_verbs hwdep sysfs entry. Simplieied using sscanf. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 2月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
ALC268 can be configured as digital-only, e.g. for HDMI, on some machines. Allow the parser to set up the digital-only mode. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Remove the doubly attachment in patch_alc268(). The input beep is attached conditionally only when needed. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When ALC262 codec is configured as digital-only, it's meaningless to add the digital beep input. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Acer X3200 needs model=auto, otherwise model=acer is pre-selected. Reference: Novell bnc#476268 https://bugzilla.novell.com/show_bug.cgi?id=476268Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 2月, 2009 5 次提交
-
-
由 Takashi Iwai 提交于
Clean up quirks for HP laptops with AD1984A using SND_PCI_QUIRK_MASK() Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Clean up IDT92HD7x quirks for HP laptops with SND_PCI_QUIRK_MASK(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
Force speaker pin config with model=hp-dv5 model for cases when bios doesn't set it up properly. All reported hp laptops using model=hp-dv5 model have speaker at pin 0x0d with same config, so it's safe to add this within hp-dv5 model. Reference: alsa-devel mailing list thread on http://mailman.alsa-project.org/pipermail/alsa-devel/2009-February/014390.htmlSigned-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This reverts commit 32e176c1. That commit caused a regression with suspend on Thinkpad SL300. Reference: kernel bug#12711 http://bugzilla.kernel.org/show_bug.cgi?id=12711Tested-by: NAlexandre Rostovtsev <tetromino@gmail.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2009 13 次提交
-
-
由 Takashi Iwai 提交于
Added the support of multiple digital outputs via auto-probing for Realtek ALC88x codecs. The multiple outputs are handled as slave streams, so only one PCM stream (and the corresponding IEC958* elements) is provided to control both digital outputs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The recent patch_realtek.c contains the slave digital-out support as well. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
Added the helper function snd_hda_multi_out_dig_cleanup() to clean up the digital outputs with multi setup. This call is needed in cases the codec supports multiple digital outputs as slaves. Otherwise the slave widgets aren't properly cleaned up. For a single digital output (e.g. in patch_conexant.c), this call isn't needed. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the missing terminator for ad1989b_slave_dig_outs[]. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Force model=auto for Acer AX1700-U3700A with ALC888 codec. Since Acer devices are handlded as model=acer as default, the auto parsing has to be specified explicitly. (Maybe it's better rather to remove this default model=acer handling, though.) Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
Change HP dv7 quirk: although reported to work with hp-m4 model (https://bugzilla.novell.com/show_bug.cgi?id=445321), the original report doesn't contain info about testing of internal microphone. Recently I received a report about internal mic not working (https://qa.mandriva.com/show_bug.cgi?id=44855#c193), this must be related with the forced line in on pin 0x0e done with hp-m4 model. Thus change the current quirk from STAC_HP_M4 to STAC_HP_DV5, later reported to be fixed on a provided kernel with this change (https://qa.mandriva.com/show_bug.cgi?id=44855#c196). Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Currently the HP connector on X200 dock doesn't detect when a HP is connected nor allows sound to be played using it. This patch fixes the problem by adding a quirk for this specific model. It's possible that others have the same NID (0x19) to report when dock HP is connected, but I don't have access to any. Please Cc me in the reply since I'm not subscribed to alsa-devel@. Signed-off-by: NAristeu Rozanski <aris@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Add STAC_DELL_S14 quirk for new laptop series. Removed un-needed pins in pin_nids for stac92hd83xxx. Also reorganized connection selection code for the respective ports per quirk define. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Update documentation regarding codec probing; the new probe_only option and the new probe_mask usage. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ASUS W5F needs the fixed codec-slots to probe to override the BIOS problem. Tested-by: NGiovanni Moser Frainer <giovanni@redix.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some devices have broken BIOS and they don't set the codec probe-bit properly after cleared by the driver. This makes the driver skipping the necessary codec slots. Since BIOS update isn't always easy, now the semantics of probe_mask option is changed a bit. When it contains the bit 8 (0x100), the lower bits are used to probe that slots regardless of codec-probe bits returned by the hardware. For example, probe_mask=0x103 will force to probe the codec slot #0 and #1. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 2月, 2009 4 次提交
-
-
After commit "ALSA: hda - Fix restore of pin configs at resume for STAC/IDT codecs", the introduced stac_save_pin_cfgs function checks already for pins == NULL case, saving then default pin configs from machine with stac92xx_save_bios_config_regs. So we can remove the extra checks when stac927x_brd_tbl[spec->board_config] == NULL. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
The devices that have been newly added during reconfig must be registered. Otherwise they won't be visible to user-space. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Detect multiple digital-out pins in snd_hda_parse_pin_defconfig(). The dig_out_pin and dig_out_type fields become arrays. The codec parser still doesn't use this multiple pins detection, though. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 2月, 2009 8 次提交
-
-
由 Takashi Iwai 提交于
Fixed a wrong pin check (a typo) for debug print of digital input pin. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Wu Fengguang 提交于
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
We found that enabling/disabling HDMI audio pin out at stream start/stop time will kill the leading 500ms or so sound samples. Avoid this by enabling pin out once and for ever at module loading time. The leading ~500ms audio samples will still be lost when switching from X-channel playback to Y-channel playback where X != Y. However there's no much we can do about it: the audio infoframe has to change and it looks like either G45 or YAMAHA requires some time to switch the configuration. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
The YAMAHA AV-X1800 requires audio infoframe to include speaker-channel mapping to play >2 channel HDMI audio. In theory that mapping should be derived from its speaker configurations contained in its ELD. However we currently cannot get ELD in console before the KMS functionalities are ready. This is a more or less general issue at least in the near future. As a workaround, we propose to allow playback of mult-channel audio when ELD is not available. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Mackenzie Morgan 提交于
Added a quirk for Asus Z37E for fixing suspend/hibernation problem. Reference: https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/25896 http://launchpadlibrarian.net/17053575/0001-Add-quirk-for-ASUS-Z37E-to-make-sound-audible-afte.patch https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=4282Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-