Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR,
UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC,
and OCTEON_ETHERNET) select PHYLIB.  These drivers are not under
NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant
parts are omitted):

warning: (NET_DSA && NET && EXPERIMENTAL && NET_ETHERNET && !S390 || ... || SB1250_MAC && NETDEVICES && NETDEV_1000 && SIBYTE_SB1xxx_SOC || TIGON3 && NETDEVICES && NETDEV_1000 && PCI || FSL_PQ_MDIO && NETDEVICES && NETDEV_1000 && FSL_SOC || GIANFAR && NETDEVICES && NETDEV_1000 && FSL_SOC || UCC_GETH && NETDEVICES && NETDEV_1000 && QUICC_ENGINE || MV643XX_ETH && NETDEVICES && NETDEV_1000 && (MV64X60 || PPC32 || PLAT_ORION) || XILINX_LL_TEMAC && NETDEVICES && NETDEV_1000 && (PPC || MICROBLAZE) || S6GMAC && NETDEVICES && NETDEV_1000 && XTENSA_VARIANT_S6000 || STMMAC_ETH && NETDEV_1000 && NETDEVICES && CPU_SUBTYPE_ST40 || PASEMI_MAC && NETDEVICES && NETDEV_10000 && PPC_PASEMI && PCI || OCTEON_ETHERNET && STAGING && !STAGING_EXCLUDE_BUILD && CPU_CAVIUM_OCTEON) selects PHYLIB which has unmet direct dependencies (!S390 && NET_ETHERNET)

PHYLIB is used by non-10/100 mbit ethernet drivers, so change the dependencies
to be NETDEVICES instead of NET_ETHERNET.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is the first version of phy driver from Micrel Inc.
Signed-off-by: NDavid J. Choi <david.choi@micrel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Octeon SOC has two types of Ethernet ports, each type with its own
driver.  However, the PHYs for all the ports are controlled by a
common MDIO bus.  Because the mdio driver is not associated with a
particular driver, but is instead a system level resource, we create s
stand-alone driver for it.

As for the driver, we put the register definitions in
arch/mips/include/asm/octeon where most of the other Octeon register
definitions live.  This is a platform driver with the platform device
for "mdio-octeon" being registered in the platform startup code.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NMaxime Bizon <mbizon@freebox.fr>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

 drivers/net/phy/Kconfig   |    6 ++
 drivers/net/phy/Makefile  |    1
 drivers/net/phy/bcm63xx.c |  132 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 139 insertions(+)
 create mode 100644 drivers/net/phy/bcm63xx.c
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds LSI ET1011C PHY driver. 
This driver is used by TI DM646x EVM.
Signed-off-by: NChaithrika U S <chaithrika@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the STMicroelectronics ste10xp PHY device driver.
It supports both the ste100p and the ste101p devices.

Suspend/resume alredy added.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the PHY device driver for the National Semiconductor
DP83865 Gig PHYTER.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

make mdio-gpio work with non OpenFirmware gpio implementation.

Aditional changes to mdio-gpio:
- use gpio_request() and gpio_free()
- place irq[] array in struct mdio_gpio_info
- add module description, author and license
- add note about compiling this driver as module
- rename mdc and mdio function (were ugly names)
- change MII to MDIO in bus name
- add __init __exit to module (un)loading functions
- probe fails if no phys added to the bus
- kzalloc bitbang with sizeof(*bitbang)

Changes since v3:
- keep bus naming "%x" to be compatible with existing drivers.

Changes since v2:
- more #ifdefs reduction
- platform driver will be registered on OF platforms also
- unified platform and OF bus_id to phy%i

Changes since v1:
- removed NO_IRQ
- reduced #idefs

Laurent, please test this driver under OF.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds an MDIO bitbang driver that uses the GPIO library and its
OF bindings to access the bus I/Os.
Signed-off-by: NLaurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

 Add Broadcom PHYs supported missing from the description.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

 PHYLIB was first marked as BROKEN on S390, then the enclosing menu marked
as non-S390, then the two dependencies merged with the conversion to
menuconfig.  Reduce to non-S390.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add support for two additional SMSC PHY models with identical interrupt
source and mask registers to the LAN83C185
Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch fixes the following build error introduced by commit
a79d8e93 and reported by Olaf Hering:

<--  snip  -->

...
  LD      .tmp_vmlinux1
arch/powerpc/sysdev/built-in.o: In function `of_add_fixed_phys':
fsl_soc.c:(.init.text+0xd34): undefined reference to `fixed_phy_add'
make: *** [.tmp_vmlinux1] Error 1

<--   snip  -->
Signed-off-by: NAdrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

this PHY present on the MPC8315E and MPC837xE RDB boards.
Signed-off-by: NJohnson Leung <r58129@freescale.com>
Signed-off-by: NKevin Lam <r43770@freescale.com>
Signed-off-by: NJoe D'Abbraccio <ljd015@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With that patch fixed.c now fully emulates MDIO bus, thus no need
to duplicate PHY layer functionality. That, in turn, drastically
simplifies the code, and drops down line count.

As an additional bonus, now there is no need to register MDIO bus
for each PHY, all emulated PHYs placed on the platform fixed MDIO bus.
There is also no more need to pre-allocate PHYs via .config option,
this is all now handled dynamically.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Previously, bitbanged MDIO was only supported in individual
hardware-specific drivers.  This code factors out the higher level
protocol implementation, reducing the hardware-specific portion to
functions setting direction, data, and clock.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

device_bind_driver() error code returning has been fixed.  release()
function has been written, so that to free resources in correct way; the
release path is now clean.

Before the rework, it used to cause
 Device 'fixed@100:1' does not have a release() function, it is broken
 and must be fixed.
 BUG: at drivers/base/core.c:104 device_release()

 Call Trace:
  [<ffffffff802ec380>] kobject_cleanup+0x53/0x7e
  [<ffffffff802ec3ab>] kobject_release+0x0/0x9
  [<ffffffff802ecf3f>] kref_put+0x74/0x81
  [<ffffffff8035493b>] fixed_mdio_register_device+0x230/0x265
  [<ffffffff80564d31>] fixed_init+0x1f/0x35
  [<ffffffff802071a4>] init+0x147/0x2fb
  [<ffffffff80223b6e>] schedule_tail+0x36/0x92
  [<ffffffff8020a678>] child_rip+0xa/0x12
  [<ffffffff80311714>] acpi_ds_init_one_object+0x0/0x83
  [<ffffffff8020705d>] init+0x0/0x2fb
  [<ffffffff8020a66e>] child_rip+0x0/0x12

Also changed the notation of the fixed phy definition on
mdio bus to the form of <speed>+<duplex> to make it able to be used by
gianfar and ucc_geth that define phy_id strictly as "%d:%d" and cleaned up
the whitespace issues.
Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition
to a dedicated 100Mbit/s WAN port.
Signed-off-by: NMichael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Disable some more menus in the configuration files that are of no
interest to a s390 machine.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

 This patch adds support for interrupt-driven operation of the Broadcom
Gigabit Ethernet PHYs.  I have included device IDs for the parts used on
Broadcom SiByte evaluation boards; more can be added as a need arises.
They are apparently generally software-compatible with one another.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>

patch-mips-2.6.18-20060920-broadcom-phy-15
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix various Kconfig typos.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

This makes it possible for HW PHY-less boards to utilize PAL goodies.  Generic
routines to connect to fixed PHY are provided, as well as ability to specify
software callback that fills up link, speed, etc.  information into PHY
descriptor (the latter feature not tested so far).
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NKriston Carson <KristonCarson@freescale.com>
Signed-off-by: NXianghua Xiao <x.xiao@freescale.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem
Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Sanitize some s390 Kconfig options.  We have ARCH_S390, ARCH_S390X,
ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT.  Replace these 6 options by
S390, 64BIT and COMPAT.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/net/phy/phy.c is broken on s390; it uses enable_irq() and friends
and these do not exist on s390.  Marked as broken for now.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch adds back the code that was taken out, thus re-enabling:

* The PHY Layer to initialize without crashing
* Drivers to actually connect to PHYs
* The entire PHY Control Layer

This patch is used by the gianfar driver, and other drivers which are in
development.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

- unexport symbols never used outside of home module
- remove dead code
- remove CONFIG_PHYCONTROL, make it unconditionally enabled

Includes fixes for problems noted by Adrian Bunk, Andrew Morton,
and one other person lost in the annals of history (and email folders).

ethernet drivers to remain as ignorant as is reasonable of the connected
PHY's design and operation details.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>