- 02 11月, 2016 16 次提交
-
-
由 Peter Ujfalusi 提交于
Use 'vm' to refer to a struct videomode instead of 'p', 't', 'timings' or something else. The code will be easier to follow if we use consistent names. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
omap_video_timings can be replaced with the generic videomode in omapdrm and the omap_video_timings can be removed. This patch will replace the omap_video_timings with videomode. With the change we no longer need the functions to convert to/from videomode and drm_display_mode to omap_video_timings, these can be removed as well. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for sync edge. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for pixel data edge. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for DE level. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information use display_flags for h/vsync level. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
Remove the interlace member and add display_flags to omap_video_timings to configure the interlace mode. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the vbp member to vback_porch. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the vfp member to vfront_porch. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the vsw member to vsync_len. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the hbp member to hback_porch. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the hfp member to hfront_porch. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the hsw member to hsync_len. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the y_res member to vactive. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Peter Ujfalusi 提交于
In preparation to move the stack to use the generic videmode struct for display timing information rename the x_res member to hactive. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Wei Yongjun 提交于
Fix the retrn value check which testing the wrong variable in dsi_bind(). Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Reviewed-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 09 6月, 2016 1 次提交
-
-
由 Tomi Valkeinen 提交于
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 03 6月, 2016 1 次提交
-
-
由 Peter Ujfalusi 提交于
All drivers to include the omapdrm/dss/omapdss.h header file. This header includes the <video/omapdss.h> Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
-
- 31 5月, 2016 1 次提交
-
-
由 Peter Ujfalusi 提交于
regulator_can_change_voltage() is deprecated and it's use is not necessary as commit: 6a0028b3 regulator: Deprecate regulator_can_change_voltage() describers it clearly. Also, regulator_set_voltage() is misused in the driver, as it is supposed to be used only in cases where the regulator voltage needs to be changed dynamically at runtime. In DSS's case, we always want a fixed voltage, set in the .dts files. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 20 5月, 2016 6 次提交
-
-
由 Tomi Valkeinen 提交于
Add a "_a" postfix to the type A PLL calc functions, to differentiate them from the type B PLL calculations which we will add shortly. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
DSS uses two types of PLLs, type A (DSI & Video) and type B (HDMI). The two types behave slightly differently, but we don't have the type of the PLL available anywhere for the driver. This patch adds an enum for the PLL type and a field in the PLL's HW data to store it. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
The names of the enum dss_clk_source's values are legacy names, only correct for OMAP3 DSS. Rename the names to more generic ones. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Now that there is no "non-generic" version of the function to get the clock source name, lets rename dss_get_generic_clk_source_name() to dss_get_clk_source_name(). Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We have two functions to return a name for clock sources for debugging purposes: dss_feat_get_clk_source_name() and dss_get_generic_clk_source_name(). The former is supposed to return a DSS IP version specific name for the clock source, and the latter is supposed to return a more generic name. All this seems a bit pointless, so let's remove the former one. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
'enum omap_dss_clk_source' is internal to dss. Let's rename it to 'dss_clk_source' match our naming convention. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 03 3月, 2016 12 次提交
-
-
由 Tomi Valkeinen 提交于
We are removing the uses of 'struct omap_overlay_manager'. This patch changes DSI driver to use 'omap_channel' instead. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
The DSS output drivers check 'dssdev->manager' in disconnect() functions. This check is not needed as the manager must always be set if the output device was connected. Remove the check. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_unregister_framedone_handler() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_register_framedone_handler() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_start_update() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_disable() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_enable() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_set_lcd_config() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_set_timings() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_disconnect() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
We are removing uses of 'struct omap_overlay_manager'. This patch changes dss_mgr_connect() to accept 'enum omap_channel' instead of 'struct omap_overlay_manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
Use 'out->dispc_channel_connected' to check if the device is connected to an overlay manager or not, instead of using 'out->manager'. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
- 29 12月, 2015 3 次提交
-
-
由 Tomi Valkeinen 提交于
Now that omapfb has its own copy of omapdss and display drivers, we can move omapdss and display drivers which omapdrm uses to omapdrm's directory. We also need to change the main drm Makefile so that omapdrm directory is always entered, because omapdss has a file that can't be built as a module. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NDave Airlie <airlied@gmail.com> Acked-by: NRob Clark <robdclark@gmail.com>
-
由 Dan Carpenter 提交于
DSI_IRQ_SYNC_LOST was ORed twice so we can remove one. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Tomi Valkeinen 提交于
All the output drivers check for 'out' being NULL, but it can never be NULL. Remove the check. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-