The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.

Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.

Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.

Hence this simple solution which partially covers the default
case.

[ Impact: fix display artifacts in perf top ]
Signed-off-by: NFrederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Arjan noticed this bug in the perf annotate help output:

    -s, --symbol <file>   symbol to annotate

that should be <symbol> instead.
Reported-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the "perf report" utility crashed in some circumstances
because the "sym" stack variable was not initialized before used
(as also proven by valgrind).

With this fix both the crash goes away and valgrind no longer complains.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Right now kernel debug info does not get resolved by default, because
we dont know where to look for the vmlinux.

The -k option can be used for that - but if no option is given, pick
up vmlinux files in the current directory - in case a kernel hacker
runs profiling from the source directory that the kernel was built in.

The real solution would be to embedd the location (and perhaps the
date/timestamp) of the vmlinux file in /proc/kallsyms, so that
tools can pick it up automatically.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

gcc warned about this bug:

util/parse-events.c: In function ‘parse_generic_hw_symbols’:
util/parse-events.c:175: warning: comparison is always false due to limited range of data type
util/parse-events.c:182: warning: comparison is always false due to limited range of data type
util/parse-events.c:190: warning: comparison is always false due to limited range of data type

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: Pick up the latest fixes before the -v8 perfcounters
	      release.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add new perf sub-command to display annotated source code:

 $ perf annotate decode_tree_entry

------------------------------------------------
 Percent |	Source code & Disassembly of /home/mingo/git/git
------------------------------------------------
         :
         :	/home/mingo/git/git:     file format elf64-x86-64
         :
         :
         :	Disassembly of section .text:
         :
         :	00000000004a0da0 <decode_tree_entry>:
         :		*modep = mode;
         :		return str;
         :	}
         :
         :	static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size)
         :	{
    3.82 :	  4a0da0:	41 54                	push   %r12
         :		const char *path;
         :		unsigned int mode, len;
         :
         :		if (size < 24 || buf[size - 21])
    0.17 :	  4a0da2:	48 83 fa 17          	cmp    $0x17,%rdx
         :		*modep = mode;
         :		return str;
         :	}
         :
         :	static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size)
         :	{
    0.00 :	  4a0da6:	49 89 fc             	mov    %rdi,%r12
    0.00 :	  4a0da9:	55                   	push   %rbp
    3.37 :	  4a0daa:	53                   	push   %rbx
         :		const char *path;
         :		unsigned int mode, len;
         :
         :		if (size < 24 || buf[size - 21])
    0.08 :	  4a0dab:	76 73                	jbe    4a0e20 <decode_tree_entry+0x80>
    0.00 :	  4a0dad:	80 7c 16 eb 00       	cmpb   $0x0,-0x15(%rsi,%rdx,1)
    3.48 :	  4a0db2:	75 6c                	jne    4a0e20 <decode_tree_entry+0x80>
         :	static const char *get_mode(const char *str, unsigned int *modep)
         :	{
         :		unsigned char c;
         :		unsigned int mode = 0;
         :
         :		if (*str == ' ')
    1.94 :	  4a0db4:	0f b6 06             	movzbl (%rsi),%eax
    0.39 :	  4a0db7:	3c 20                	cmp    $0x20,%al
    0.00 :	  4a0db9:	74 65                	je     4a0e20 <decode_tree_entry+0x80>
         :			return NULL;
         :
         :		while ((c = *str++) != ' ') {
    0.06 :	  4a0dbb:	89 c2                	mov    %eax,%edx
         :			if (c < '0' || c > '7')
    1.99 :	  4a0dbd:	31 ed                	xor    %ebp,%ebp
         :		unsigned int mode = 0;
         :
         :		if (*str == ' ')
         :			return NULL;
         :
         :		while ((c = *str++) != ' ') {
    1.74 :	  4a0dbf:	48 8d 5e 01          	lea    0x1(%rsi),%rbx
         :			if (c < '0' || c > '7')
    0.00 :	  4a0dc3:	8d 42 d0             	lea    -0x30(%rdx),%eax
    0.17 :	  4a0dc6:	3c 07                	cmp    $0x7,%al
    0.00 :	  4a0dc8:	76 0d                	jbe    4a0dd7 <decode_tree_entry+0x37>
    0.00 :	  4a0dca:	eb 54                	jmp    4a0e20 <decode_tree_entry+0x80>
    0.00 :	  4a0dcc:	0f 1f 40 00          	nopl   0x0(%rax)
   16.57 :	  4a0dd0:	8d 42 d0             	lea    -0x30(%rdx),%eax
    0.14 :	  4a0dd3:	3c 07                	cmp    $0x7,%al
    0.00 :	  4a0dd5:	77 49                	ja     4a0e20 <decode_tree_entry+0x80>
         :				return NULL;
         :			mode = (mode << 3) + (c - '0');
    3.12 :	  4a0dd7:	0f b6 c2             	movzbl %dl,%eax
         :		unsigned int mode = 0;
         :
         :		if (*str == ' ')
         :			return NULL;
         :
         :		while ((c = *str++) != ' ') {
    0.00 :	  4a0dda:	0f b6 13             	movzbl (%rbx),%edx
   16.74 :	  4a0ddd:	48 83 c3 01          	add    $0x1,%rbx
         :			if (c < '0' || c > '7')
         :				return NULL;
         :			mode = (mode << 3) + (c - '0');

The first column is the percentage of samples that arrived on that
particular line - relative to the total cost of the function.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Prepare for the 'perf annotate' implementation by splitting off
builtin-annotate.c from builtin-report.c.

( We keep this commit separate to ease the later librarization
  of the facilities that perf-report and perf-annotate shares. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also fix a misalignment in usage string printing.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also add perf list to command-list.txt.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also update other areas of the help texts.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Also standardize the cache printout (so that it can be pasted back
into the command) and sort out the aliases.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf list: List all the available event types which can be used in
-e (--event) options.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.

This is a 3-dimensional space:

       { L1-D, L1-I, L2, ITLB, DTLB, BPU } x
       { load, store, prefetch } x
       { accesses, misses }

User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)

Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.

Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.

( x86 is supported for now, with the Nehalem event table filled in,
  and with Core2 and Atom having placeholder tables. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.

Clean this up by creating a separate attr->type field.

Also clean up the various similarly complex user-space bits
all around counter attribute management.

The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).

(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If perf top is executed with a zero value for the refresh rate,
we get a division by zero exception while computing samples_per_sec.

Also a zero refresh rate is not possible, neither do we want to
accept negative values.

[ Impact: fix division by zero in perf top ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244223061-5399-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To allow the debugging of frequency-adjusting counters, sample
those adjustments and display them in perf report -D.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In order to allow easy tracking of the period, also provide means of
adding it to the sample data.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The purpose of PERF_SAMPLE_CONFIG was to identify the counters,
since then we've added counter ids, use those instead.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Turns out that neither PowerPC nor older x86 compilers know this switch
...

and since it does not make a measurable difference, just omit it.
Reported-by: NPaul Mackerras <paulus@samba.org>
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A number of places said 'events' while they should say 'samples'.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Before:

    25.96%  copy_user_generic_string
    15.23%  two_op
    15.19%  one_op
     6.92%  enough_duration
     1.23%  alloc_pages_current
     1.14%  acpi_os_read_port
     1.08%  _spin_lock

After:

    25.96%  [k] copy_user_generic_string
    15.23%  [.] two_op
    15.19%  [.] one_op
     6.92%  [.] enough_duration
     1.23%  [k] alloc_pages_current
     1.14%  [k] acpi_os_read_port
     1.08%  [k] _spin_lock

The '[k]' differentiator is a quick clue that it's a kernel symbol,
without having to bring in the full dso column.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In order to deal with [vdso] maps generalize the ip->symbol path
a bit and allow to override some bits with custom functions.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In order to track the vdso also generate mmap events for
install_special_mapping().
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In order to make arch_vma_name() work from inside
install_special_mapping() we need to set the context.vdso
before calling it.

( This is needed for performance counters to be able to track
  this special executable area. )
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Support frequency-based profiling and make it the default.

(Also add a Hz printout in perf top.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Otherwise the code does not compile on 32-bit boxes.

builtin-report.c: In function 'map__fprintf':
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 3 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 4 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 5 has type 'uint64_t'
Signed-off-by: NYong Wang <yong.y.wang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090605033735.GA20451@ywang-moblin2.bj.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit 8e3747c1 ("perf_counter: Change data head from u32 to u64")
changed the type of 'head' in struct perf_mmap_data from atomic_t
to atomic_long_t, but missed converting one use of atomic_read on
it to atomic_long_read.  The effect of using atomic_read rather than
atomic_long_read on powerpc (and other big-endian architectures) is
that we get the high half of the 64-bit quantity, resulting in the
cmpxchg retry loop in perf_output_begin spinning forever as soon as
data->head becomes non-zero.  On little-endian architectures such as
x86 we would get the low half, resulting in a lockup once data->head
becomes greater than 4G.

This fixes it by using atomic_long_read rather than atomic_read.

[ Impact: fix perfcounter lockup on PowerPC / big-endian systems ]
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18984.33964.21541.743096@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Remove a bad BUG_ON in the fence management code.

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: ignore EDID with really tiny modes.
  drm: don't associate _DRM_DRIVER maps with a master
  drm/i915: intel_lvds.c fix section mismatch
  drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.
  drm: set permissions on edid file to 0444
  drm: add newlines to text sysfs files
  drm/radeon: fix ring free alignment calculations
  drm: fix irq naming for kms drivers.

While running 20 parallel instances of dd as follows:

  #!/bin/bash
  for i in `seq 1 20`; do
           dd if=/dev/zero of=/export/hda3/dd_$i bs=1073741824 count=1 &
  done
  wait

on a 16G machine, we noticed that rather than just killing the processes,
the entire kernel went down.  Stracing dd reveals that it first does an
mmap2, which makes 1GB worth of zero page mappings.  Then it performs a
read on those pages from /dev/zero, and finally it performs a write.

The machine died during the reads.  Looking at the code, it was noticed
that /dev/zero's read operation had been changed by
557ed1fa ("remove ZERO_PAGE") from giving
zero page mappings to actually zeroing the page.

The zeroing of the pages causes physical pages to be allocated to the
process.  But, when the process exhausts all the memory that it can, the
kernel cannot kill it, as it is still in the kernel mode allocating more
memory.  Consequently, the kernel eventually crashes.

To fix this, I propose that when a fatal signal is pending during
/dev/zero read operation, we simply return and let the user process die.
Signed-off-by: NSalman Qazi <sqazi@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
[ Modified error return and comment trivially.  - Linus]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix warnings for return values that we don't care about:

 util/quote.c:222: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
 util/quote.c:235: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
 util/quote.c: In function ‘write_name_quotedpfx’:
 util/quote.c:290: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244146558-8635-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf top is refreshed every delay_secs the thread runs in such
loop:

while (sleep(delay_secs)) {
	print_sym_table();
}

At the end of print_sym_table(), poll is used without sleep delay
to check if we have something from stdin.

It means that this check is done only every delay_secs, which can
be higher that 2 secs if the user defined a custom refresh rate.

We can drop sleep() here and directly use poll to wait between
refresh periods, so that the reaction after the user stops perf top
after typing "Enter" is immediate and doesn't suffer from the
delay_secs latency.

Nb: poll doesn't add any overhead that can parasite perf top measures
since it sleeps the entire timeout here.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244141284-7507-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We don't set up the canary; let's disable stack protector on boot.c so
we can get into lguest_init, then set it up.  As a side effect,
switch_to_new_gdt() sets up %fs for us properly too.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>