we report errors to the caller. THis patch adds error handling to the driver.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- report errors
- cleanup in error case
- use of endianness macros
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this driver ignores errors while starting the transmit queue. It will
never be reported stopped as the completion handler won't run
and it will never be started again as it will be considered started.
This patch adds error handling.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this driver sets intfdata to NULL while it still can be read and happily followed.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this driver has a memory leak in an error case.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the USB ID of the ADS Tech USBX-707 USB IR blaster (that
comes with the ADS Tech PTV-305 grabber card), which has a ftdi232bm
inside hooked up to a pic.

With this it should be fairly straightforward to make at least lirc
receiving work with this device. I will submit a patch to lirc for that
as soon as I have one ready, I'm getting data with minicom with this
patch, but need to figure out some more details such as best/correct
baudrate.
Signed-off-by: NJelle Foks <jelle@foks.8m.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this has the same race as the visor driver. The counter must be incremented
under the lock it is checked under.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this fixes a small race in visor_write.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- proper endianness macros
- scheduling in interrupt in error case
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NNaranjo Manuel Francisco <naranjo.manuel@gmail.com>

o The "real" usb-devices export now a device node which can
  populate /dev/bus/usb.

o The usb_device class is optional now and can be disabled in the
  kernel config. Major/minor of the "real" devices and class devices
  are the same.

o The environment of the usb-device event contains DEVNUM and BUSNUM to
  help udev and get rid of the ugly udev rule we need for the class
  devices.

o The usb-devices and usb-interfaces share the same bus, so I used
  the new "struct device_type" to let these devices identify
  themselves. This also removes the current logic of using a magic
  platform-pointer.
  The name of the device_type is also added to the environment
  which makes it easier to distinguish the different kinds of devices
  on the same subsystem.

  It looks like this:
    add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1
    ACTION=add
    DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1
    SUBSYSTEM=usb
    SEQNUM=1533
    MAJOR=189
    MINOR=131
    DEVTYPE=usb_device
    PRODUCT=46d/c03e/2000
    TYPE=0/0/0
    BUSNUM=002
    DEVNUM=004

This udev rule works as a replacement for usb_device class devices:
  SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \
    NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644"

Updated patch, which needs the device_type patches in Greg's tree.

I also got a bugzilla assigned for this. :)
  https://bugzilla.novell.com/show_bug.cgi?id=250659Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With CONFIG_BLOCK=n, this build error happens:
WARNING: "bdev_read_only" [drivers/usb/gadget/g_file_storage.ko] undefined!
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as874) adds another piece to the user-visible part of the
USB autosuspend interface.  The new power/level sysfs attribute allows
users to force the device on (with autosuspend off), force the device
to sleep (with autoresume off), or return to normal automatic operation.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add logical channel support for ATI Remote Wonder II

The ATI Remote Wonder II can be configured with one of 16 unique logical
channels. Allowing up to 16 remotes to be used independently within
range of each other. This change adds functionality to configure the
receiver and filter the input data to respond or exclude remotes
configured with different logical channels.
Signed-off-by: NPeter Stokes <linux@dadeos.freeserve.co.uk>
Acked-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

the sierra driver does not directly use usb_kill_urb(). It uses a wrapper.
This wrapper means that callbacks which are running are not killed during
close, resubmitting and illicitly pushing data into the tty layer.
The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed.
The same problem as the option driver.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

the option driver does not directly use usb_kill_urb(). It uses a wrapper.
This wrapper means that callbacks which are running are not killed during
close, resubmitting and illicitly pushing data into the tty layer.
The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NMatthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

memory allocated must be freed in the error case.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as872) adds some WARN_ON()s to various error checks which
are never supposed to fail.  Unsettlingly, one of them has shown up in
a user's log!  Maybe making the warning more visible and having the
call-stack information available will help pinpoint the source of the
problem.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

there's code unclean w.r.t. endianness in the mos7720 driver.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

NULL checks should be before the first dereference.

Spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Am Montag, 19. 2007 10:25 schrieb Adrian Bunk:
> The Coverity checker spotted the following NULL dereference:

And this fixes an oops upon allocation failures.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix sparse NULL warnings:

drivers/usb/net/dm9601.c:88:23: warning: Using plain integer as NULL pointer
drivers/usb/net/dm9601.c:174:22: warning: Using plain integer as NULL pointer
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRichard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes:

- breaking DMA rules about buffers
- usage of _global_ variables to save a single device's attributes
- racy access to urb->status
- smp monotonity issue with statistics
- use of one buffer for many simultaneous URBs
- error handling introduced
- several instances of following NULL pointers
- use after free
- unnecessary GFP_ATOMIC
- GFP_KERNEL in interrupt
- various cleanups
- write room granularity issue that bit cdc-acm
- race in shutdown
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

io_edgeport is using a global variable without locking.
This is _the_ classical race condition. This patch switches to atomic_t.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as870) adds a delay to ehci-hcd's bus_resume routine.
Apparently there are controllers and/or BIOSes out there which need
such a delay to get the ports back into their correct state.  This
fixes Bugzilla #8190.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as867) adds an entry for the new power/autosuspend
attribute in Documentation/ABI/testing, and it changes the behavior of
the delay value.  Now a delay of 0 means to autosuspend as soon as
possible, and negative values will prevent autosuspend.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as866) adds new entry points for external USB device
suspend and resume requests, as opposed to internally-generated
autosuspend or autoresume.  It also changes the existing
remote-wakeup code paths to use the new routines, since remote wakeup
is not the same as autoresume.

As part of the change, it turns out to be necessary to do remote
wakeup of root hubs from a workqueue.  We had been using khubd, but it
does autoresume rather than an external resume.  Using the
ksuspend_usb_wq workqueue for this purpose seemed a logical choice.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this driver's help text incorrectly claims to support only single port
devices.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this driver has an interesting way of handling ENOMEM: complain and ignore.
If you decide to live with allocation failures, you must

1. guard against URBs without corresponding buffers
2. complete allocation failures
3. always test entries for NULL before you follow the pointers

This patch does so.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Correct the offsets of the SI_CTRL, PRI_CTRL registers according to
the Reference Manual errata sheet in order to prevent unwanted
settings regarding burst transactions and priority states.
Signed-off-by: NChristian Engelmayer <Christian.Engelmayer@frequentis.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as865) fixes a race in the HCD removal code discovered by
Milan Plzik.  Arrival of an interrupt after the root hub was
unregistered could cause the root-hub status timer to start up, even
after it was supposed to have been shut down.  The problem is fixed by
moving the del_timer_sync() call to after the HCD's stop() method, at
which time IRQ generation should be disabled.

Cc: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've acquired a second device for testing and plan to make some changes in
the near future to export all the device stats to sysfs (based on my
proposed patch to add them to the proc file ~2007-01-30).
Signed-off-by: NSimon Arlott <simon@fire.lp0.eu>
Acked-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When the device is polled for status there is a lot of useful status
information available that is ignored.  This patch stores the device info
array when the status is polled and adds sysfs files to the usb device to
allow userspace to query it.  Since the device updates its status
internally once a second the poll time is changed to this, and
round_jiffies_relative is used to avoid waking the cpu unnecessarily.
Signed-off-by: NSimon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@free.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There is currently no path from the ATM device in /sys to the USB device's
interface that the driver is using; this patch creates a "device" symlink.  It
is then possible to get to the cxacru ADSL statistics
(http://lkml.org/lkml/2007/2/23/328):

/sys/class/atm/cxacru0/device $ ls *_rate *_margin *_attenuation
downstream_attenuation  downstream_snr_margin  upstream_rate
downstream_rate         upstream_attenuation   upstream_snr_margin

If this link is not appropriate I'd have to create device files in
/sys/class/atm/cxacru0 instead - which seems less appropriate since the ADSL
statistics are for the USB device not ATM (which is running over the ADSL).

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NSimon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@math.u-psud.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

GFP_KERNEL will do.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as864) moves the work routine for USB autosuspend from one
source file to another.  This permits the removal of one whole global
symbol (!) and should smooth the way for more changes in the future.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Someone changed the code to kthread and used his style instead of mine.

The problem with the block variables is that they provoke shadowing,
which is actually exactly what has happened in my other tree which
has the class patch.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The usb-storage switched to binding to first endpoint recently. Apparently,
there are devices out there with extra endpoints. It is perfectly legal.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this patch exports the attributes cdc-acm knows about a device through sysfs.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this adds another structure for CDC devices to cdc.h.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>