Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing of
the full path string for each node.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170718214339.7774-19-robh@kernel.orgSigned-off-by: NBorislav Petkov <bp@suse.de>

It is a write-only variable so get rid of it.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRobert Richter <rric@kernel.org>
Acked-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NThor Thayer <thor.thayer@linux.intel.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Loc Ho <lho@apm.com>
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org

attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with
const attribute_group. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
CC: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/776cb8265509054abd01b0b551624cc0da3b88e7.1499078335.git.arvind.yadav.cs@gmail.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Using the homegrown amd_get_nb_id() to find a node ID on AMD was fine
while the L3 to node mapping was 1:1. And Zen topology broke this. So
let's start slowly moving away from it and use the topology interfaces
instead.
Signed-off-by: NYazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/1490041614-90057-2-git-send-email-Yazen.Ghannam@amd.com
[ Massage commit message. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

Non-existent or empty DIMM slots result in error return from
RD_REGP(). But we shouldn't give up on failure.

So long as we find at least one DIMM we can continue.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170628234407.21521-1-tony.luck@intel.comSigned-off-by: NBorislav Petkov <bp@suse.de>

In the i5000 and i5400 drivers, the NRECMEMB register is defined as a
16-bit value, which results in wrong shifts in the code, as reported by
sparse.

In the datasheets ([1], section 3.9.22.20 and [2], section 3.9.22.21),
this register is a 32-bit register. A u32 value for the register fixes
the wrong shifts warnings and matches the datasheet.

Also fix the mask to access to the CAS bits [27:16] in the i5000 driver.

[1]: https://www.intel.com/content/dam/doc/datasheet/5000p-5000v-5000z-chipset-memory-controller-hub-datasheet.pdf
[2]: https://www.intel.se/content/dam/doc/datasheet/5400-chipset-memory-controller-hub-datasheet.pdfSigned-off-by: NJérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170629005729.8478-1-jeremy.lefaure@lse.epita.frSigned-off-by: NBorislav Petkov <bp@suse.de>

The function sbi_send() is local to just pnd2_edac.c and does not need
to be in global scope, so make it static.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170623084855.9197-1-colin.king@canonical.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Add code comment to make it clear that the fall-through is intentional
and, OR ret with its previous value to avoid overwriting it so that
callers can check the correct return value.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170622220535.GA4896@embeddedgus
[ Massage a bit. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

Use of_address_to_resource() and resource_size() instead of manually
parsing the "reg" property from the "memory" node(s).
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: NThor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170606235500.22772-3-chris.packham@alliedtelesis.co.nzSigned-off-by: NBorislav Petkov <bp@suse.de>

Xiaolong Ye reported the following failure on Broadwell D server:

  EDAC sbridge: Some needed devices are missing
  EDAC MC: Removed device 0 for sbridge_edac.c Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0
  EDAC sbridge: Couldn't find mci handler
  EDAC sbridge: Failed to register device with error -19.

Broadwell D (only IMC0 per socket) and Broadwell X (IMC0 and IMC1 per
socket) use the same PCI device IDs for IMC0 per socket, then they
share pci_dev_descr_broadwell_table (n_imcs_per_sock=2). In this case,
Broadwell D wrongly creates the nonexistent SOCK EDAC memory controller
and reports above error messages, since it has no IMC1 per socket.

Avoid creating the nonexistent SOCK memory controller.
Reported-and-tested-by: NXiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170608113351.25323-1-qiuxu.zhuo@intel.com
[ Massage. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

Fix typo in "poison consumption" error description.
Signed-off-by: NYazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1497286703-62853-1-git-send-email-Yazen.Ghannam@amd.comSigned-off-by: NBorislav Petkov <bp@suse.de>

edac_op_state is a module parameter which affects the behaviour of
the driver probe which can potentially be invoked as soon as the
platform driver registration happens. Because of this we need to
ensure that we sanity check the module parameter before calling
platform_register_drivers().
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170607215530.8604-1-chris.packham@alliedtelesis.co.nzSigned-off-by: NBorislav Petkov <bp@suse.de>

Compare the number of debugfs entries created by
thunderx_create_debugfs_nodes() with the requested number of entries to
properly determine whether to print a warning.
Signed-off-by: NVadim Lomovtsev <Vadim.Lomovtsev@caviumnetworks.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20170531155157.93583-1-stemerkhanov@cavium.comSigned-off-by: NSergey Temerkhanov <s.temerkhanov@gmail.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>

Check the return status of platform_driver_register() in
mv64x60_edac_init(). Only output messages and initialise the
edac_op_state if the registration is successful.
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170529212142.25572-2-chris.packham@alliedtelesis.co.nzSigned-off-by: NBorislav Petkov <bp@suse.de>

Kaby Lake seems to work just like Skylake.
Reported-and-tested-by: NDoug Thompson <bc.tdw@recursor.net>
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1495823683-32569-1-git-send-email-jbaron@akamai.comSigned-off-by: NBorislav Petkov <bp@suse.de>

To allow this driver to be used on non-powerpc platforms it needs to use
io accessors suitable for all platforms.
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170518083135.28048-4-chris.packham@alliedtelesis.co.nzSigned-off-by: NBorislav Petkov <bp@suse.de>

Change this from mpc85xx_pci_err to mv64x60_pci_err. The former is
likely a hangover from when this driver was created.
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20170518083135.28048-3-chris.packham@alliedtelesis.co.nzSigned-off-by: NBorislav Petkov <bp@suse.de>

Collapse 'case:' in *_mci_bind_devs() and update driver version from
1.1.1 to 1.1.2.
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000934.87971-1-qiuxu.zhuo@intel.comSigned-off-by: NBorislav Petkov <bp@suse.de>

This is based on previous work by Patrick Geary, see Link.

Additional cleanups ontop:

 - Remove the code to read MCMTR from pci_ha1_ta and CHN_TO_HA macro,
 now that TA0 and TA1 are unified.

 - Remove get_pdev_same_bus(), since in get_dimm_config() the
 variable "pvt->pci_ta" for KNL is also ready, we can simply use
 pci_read_config_dword(pvt->pci_ta, KNL_MCMTR, &pvt->info.mcmtr) to read
 MCMTR.
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/57884350.1030401@supermicro.com
Link: http://lkml.kernel.org/r/20170523000910.87925-1-qiuxu.zhuo@intel.com
[ Make __populate_dimms() return int. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

We don't need this quirk anymore now that the EDAC memory controller
representation matches the hardware.
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000834.87881-1-qiuxu.zhuo@intel.com
[ Commit message. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

... to slim down get_dimm_config().

No functionality change.
Signed-off-by: NBorislav Petkov <bp@suse.de>

It is called "sb_edac.c" now.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Tony pointed out: "currently the driver pretends there is one big
8-channel memory controller per socket instead of 2 4-channel
controllers. This is fine with all memory controller populated with
symmetrical DIMM configurations, but runs into difficulties on
asymmetrical setups".

Restructure the driver to assign an EDAC memory controller to each real
h/w memory controller to resolve the issue.
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000731.87793-1-qiuxu.zhuo@intel.com
[ Break some lines at convenient points. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

EDAC assigns logical memory controller numbers in the order that we find
memory controllers, which depends on which PCI bus they are on. Some
systems end up with MC0 on socket0, others (e.g Haswell) have MC0 on
socket3.

All this is made more confusing for users because we use the string
"Socket" while generating names for memory controllers, but the number
that we attach there is the memory controller number. E.g.

  EDAC MC0: Giving out device to module sbridge_edac.c controller
    Haswell Socket#0: DEV 0000:ff:12.0 (INTERRUPT)

Change the names to say "SrcID#%d" (where the number we use is read from
the h/w associated with the memory controller instead of some logical
number internal to the EDAC driver). New message:

  EDAC MC0: Giving out device to module sbridge_edac.c controller
    Haswell SrcID#3: DEV 0000:ff:12.0 (INTERRUPT)
Reported-by: NAndrey Korolyov <andrey@xdel.ru>
Reported-by: NPatrick Geary <patrickg@supermicro.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000603.87748-1-qiuxu.zhuo@intel.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Each of the PCI device IDs belongs to a CPU socket, or to one of the
integrated memory controllers. Provide an enum to specify the domain of
each, and distinguish the resource number in each domain: the number
of the PCI device IDs per integrated memory controller/socket, and the
number of integrated memory controllers per socket.
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170523000533.87704-1-qiuxu.zhuo@intel.com
[ Realign pci_dev_descr_knl members. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

struct irq_domain_ops is not modified, so it can be made const.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Cc: Thor Thayer <thor.thayer@linux.intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170524133505.1233-1-tklauser@distanz.chSigned-off-by: NBorislav Petkov <bp@suse.de>

The wrong index into the csbases/csmasks arrays was being passed to
the function to compute the chip select sizes, which resulted in the
wrong size being computed. Address that so that the correct values are
computed and printed.

Also, redo how we calculate the number of pages in a CS row.
Reported-by: NBenjamin Bennett <benbennett@gmail.com>
Signed-off-by: NYazen Ghannam <yazen.ghannam@amd.com>
Cc: <stable@vger.kernel.org> # 4.10.x
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1493313114-11260-1-git-send-email-Yazen.Ghannam@amd.com
[ Remove unneeded integer math comment, minor cleanups. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>

Leave it to the user to decide whether to enable this or not. Otherwise,
platform-specific drivers won't initialize (currently, EDAC supports
only a single platform driver loaded).
Signed-off-by: NBorislav Petkov <bp@suse.de>

Change them to have the edac_ prefix.

No functionality change.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Move the remaining functionality to edac_mc.c. Convert "edac_report=" to
a module parameter.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Remove the old URLs.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Move all the EDAC core functionality behind CONFIG_EDAC and get rid of
that indirection. Update defconfigs which had it.

While at it, fix dependencies such that EDAC depends on RAS for the
tracepoints.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: linux-edac@vger.kernel.org

... and this happens only when CONFIG_RAS is enabled.
Signed-off-by: NBorislav Petkov <bp@suse.de>

... as part of moving stuff away from edac_stub.c
Signed-off-by: NBorislav Petkov <bp@suse.de>

... and the glue around it. It is not needed anymore.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Use mc_devices list instead to check whether we have EDAC driver
instances successfully registered with EDAC core.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Apparently, some machines used to report DRAM errors through a PCI SERR
NMI. This is why we have a call into EDAC in the NMI handler. See

  c0d12172 ("drivers/edac: add new nmi rescan").

From looking at the patch above, that's two drivers: e752x_edac.c and
e7xxx_edac.c. Now, I wanna say those are old machines which are probably
decommissioned already.

Tony says that "[t]the newest CPU supported by either of those drivers
is the Xeon E7520 (a.k.a. "Nehalem") released in Q1'2010. Possibly some
folks are still using these ... but people that hold onto h/w for 7
years generally cling to old s/w too ... so I'd guess it unlikely that
we will get complaints for breaking these in upstream."

So even if there is a small number still in use, we did load EDAC with
edac_op_state == EDAC_OPSTATE_POLL by default (we still do, in fact)
which means a default EDAC setup without any parameters supplied on the
command line or otherwise would never even log the error in the NMI
handler because we're polling by default:

  inline int edac_handler_set(void)
  {
         if (edac_op_state == EDAC_OPSTATE_POLL)
                 return 0;

         return atomic_read(&edac_handlers);
  }

So, long story short, I'd like to get rid of that nastiness called
edac_stub.c and confine all the EDAC drivers solely to drivers/edac/. If
we ever have to do stuff like that again, it should be notifiers we're
using and not some insanity like this one.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>

... like the rest of the file.
Signed-off-by: NBorislav Petkov <bp@suse.de>

Remove unused code reserved for upcoming CPUs.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSergey Temerkhanov <s.temerkhanov@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Jan.Glauber@cavium.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170406113834.17153-1-s.temerkhanov@gmail.comSigned-off-by: NBorislav Petkov <bp@suse.de>

Shift the node number by 3 bits instead of 8 allowing proper functioning
with default EDAC_MAX_MCS.
Signed-off-by: NSergey Temerkhanov <s.temerkhanov@gmail.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Jan.Glauber@cavium.com
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170406113755.17082-1-s.temerkhanov@gmail.comSigned-off-by: NBorislav Petkov <bp@suse.de>