By now, the recordmcount only records the function that in
following sections:
.text/.ref.text/.sched.text/.spinlock.text/.irqentry.text/
.kprobes.text/.text.unlikely

For the function that not in these sections, the call mcount
will be in place and not be replaced when kernel boot up. And
it will bring performance overhead, such as do_mem_abort (in
.exception.text section). This patch make the call mcount to
nop for this case in recordmcount.

Link: http://lkml.kernel.org/r/1446019445-14421-1-git-send-email-huawei.libin@huawei.com
Link: http://lkml.kernel.org/r/1446193864-24593-4-git-send-email-huawei.libin@huawei.com

Cc: <lkp@intel.com>
Cc: <catalin.marinas@arm.com>
Cc: <takahiro.akashi@linaro.org>
Cc: <stable@vger.kernel.org> # 3.18+
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLi Bin <huawei.libin@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In nop_mcount, shdr->sh_offset and welp->r_offset should handle
endianness properly, otherwise it will trigger Segmentation fault
if the recordmcount main and file.o have different endianness.

Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.com

Cc: <stable@vger.kernel.org> # 3.0+
Signed-off-by: NLi Bin <huawei.libin@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The documentation on top of __DECLARE_TRACE() does not match its
implementation since the condition check has been added to the
RCU lockdep checks. Update the documentation to match its
implementation.

Link: http://lkml.kernel.org/r/1446504164-21563-1-git-send-email-mathieu.desnoyers@efficios.com

CC: Dave Hansen <dave@sr71.net>
Fixes: a05d59a5 "tracing: Add condition check to RCU lockdep checks"
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Make ftrace_event_is_function() return bool to improve readability
due to this particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-9-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Make is_legal_op() return bool to improve readability due to this particular
function only using either one or zero as its return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-8-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Make rb_event_is_commit() return bool to improve readability
due to this particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-7-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Makes rb_per_cpu_empty() return bool to improve readability.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-6-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Make ring_buffer_empty() and ring_buffer_empty_cpu() return bool.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-5-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Make rb_is_reader_page() return bool to improve readability due to this
particular function only using either true or false as its return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-4-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch makes report_latency return bool due to this
particular function only using either one or zero as its
return value.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-3-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch makes report_latency return bool to improve readability,
indicating whether this new latency should be reported/recorded.

No functional change.

Link: http://lkml.kernel.org/r/1443537816-5788-2-git-send-email-bywxiaobai@163.comSigned-off-by: NYaowei Bai <bywxiaobai@163.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The commit 88920427 ("tracing: Update trace-event-sample with
TRACE_SYSTEM_VAR documentation") changed TRACE_SYSTEM to 'sample-trace',
but didn't make the according change of its name in the comments.

Link: http://lkml.kernel.org/r/1443599650-23680-1-git-send-email-zhang.chunyan@linaro.orgSigned-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Update instancd_rmdir to use tracefs_remove_recursive instead of
debugfs_remove_recursive.This was left in the transition from debugfs
to tracefs.

Link: http://lkml.kernel.org/r/1445169490-18315-2-git-send-email-hello.wjx@gmail.com

Cc: stable@vger.kernel.org # 4.1+
Fixes: 8434dc93 ("tracing: Convert the tracing facility over to use tracefs")
Signed-off-by: NJiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There's no need to record the time tracepoints take when tracing is off.
This is because:
1) We cannot see these records since ring_buffer record is off at that
moment.
2) If tracing is off and benchmark tracepoint is enabled, the time
tracepoint takes is fewer than the same situation when tracing is on,
since the tracepoints need to be wrote into ring_buffer, it would
take more time. If turn on tracing at this moment, the average and
standard deviation cannot exactly present the time that tracepoints
take to write data into ring_buffer.

Link: http://lkml.kernel.org/r/1445947933-27955-1-git-send-email-zhang.chunyan@linaro.orgSigned-off-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Although, the default value of rel_type_nop is zero, and the value
of R_386_NONE/R_X86_64_NONE is zero too, but it should be assigned
a meaningful value explicitly, otherwise it looks confused.

Assign R_386_NONE to rel_type_nop for 386, assign R_X86_64_NONE
to rel_type_nop for x86_64.

Link: http://lkml.kernel.org/r/1446020606-16352-1-git-send-email-huawei.libin@huawei.comSigned-off-by: NLi Bin <huawei.libin@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

For the case where pids are already in set_event_pid, and one is added or
removed then each CPU should be checked to make sure that the new or old pid
is on or not on a CPU.

 For example:

 # echo 123 >> set_event_pid

or

 # echo '!123' >> set_event_pid

Link: http://lkml.kernel.org/r/20151030061643.GA19480@cacSuggested-by: NJiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

p_start() and p_stop() are seq_file functions that match. Teach sparse to
know that rcu_read_lock_sched() that is taken by p_start() is released by
p_stop.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

My tests found that if a task is running but not filtered when set_event_pid
is modified, then it can still be traced.

Call on_each_cpu() to check if the current running task should be filtered
and update the per cpu flags of tr->data appropriately.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the necessary hooks to use the pids loaded in set_event_pid to filter
all the events enabled in the tracing instance that match the pids listed.

Two probes are added to both sched_switch and sched_wakeup tracepoints to be
called before other probes are called and after the other probes are called.
The first is used to set the necessary flags to let the probes know to test
if they should be traced or not.

The sched_switch pre probe will set the "ignore_pid" flag if neither the
previous or next task has a matching pid.

The sched_switch probe will set the "ignore_pid" flag if the next task
does not match the matching pid.

The pre probe allows for probes tracing sched_switch to be traced if
necessary.

The sched_wakeup pre probe will set the "ignore_pid" flag if neither the
current task nor the wakee task has a matching pid.

The sched_wakeup post probe will set the "ignore_pid" flag if the current
task does not have a matching pid.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Create a tracing directory called set_event_pid, which currently has no
function, but will be used to filter all events for the tracing instance or
the pids that are added to the file.

The reason no functionality is added with this commit is that this commit
focuses on the creation and removal of the pids in a safe manner. And tests
can be made against this change to make sure things are correct before
hooking features to the list of pids.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In order to guarantee that a probe will be called before other probes that
are attached to a tracepoint, there needs to be a mechanism to provide
priority of one probe over the others.

Adding a prio field to the struct tracepoint_func, which lets the probes be
sorted by the priority set in the structure. If no priority is specified,
then a priority of 10 is given (this is a macro, and perhaps may be changed
in the future).

Now probes may be added to affect other probes that are attached to a
tracepoint with a guaranteed order.

One use case would be to allow tracing of tracepoints be able to filter by
pid. A special (higher priority probe) may be added to the sched_switch
tracepoint and set the necessary flags of the other tracepoints to notify
them if they should be traced or not. In case a tracepoint is enabled at the
sched_switch tracepoint too, the order of the two are not random.

Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now, ftrace only calculate the dyn_ftrace number in the adding
breakpoint loop, not in adding update and finish update loop.

Calculate the correct dyn_ftrace, once ftrace reports the failure message
to the userspace.

Link: http://lkml.kernel.org/r/1442420382-13130-1-git-send-email-mnfhuang@gmail.comSigned-off-by: NMinfei Huang <mnfhuang@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Both start_branch_trace() and stop_branch_trace() are used in only one
location, and are both static. As they are small functions there is no
need to keep them separated out.

Link: http://lkml.kernel.org/r/1445000689-32596-1-git-send-email-0x7f454c46@gmail.comSigned-off-by: NDmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a new options to trace Kconfig, CONFIG_TRACING_EVENTS_GPIO, that is
used for enabling/disabling compilation of gpio function trace events.

Link: http://lkml.kernel.org/r/1438432079-11704-4-git-send-email-tal.shorer@gmail.comAcked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NTal Shorer <tal.shorer@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Allow a trace events header file to disable compilation of its
trace events by defining the preprocessor macro NOTRACE.

This could be done, for example, according to a Kconfig option.

Link: http://lkml.kernel.org/r/1438432079-11704-3-git-send-email-tal.shorer@gmail.comSigned-off-by: NTal Shorer <tal.shorer@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Link: http://lkml.kernel.org/r/1443545176-3215-5-git-send-email-0x7f454c46@gmail.comSigned-off-by: NDmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Extend module command for function filter selection with globbing.
It uses the same globbing as function filter.

  sh# echo '*alloc*:mod:*' > set_ftrace_filter

Will trace any function with the letters 'alloc' in the name in any
module but not in kernel.

  sh# echo '!*alloc*:mod:ipv6' >> set_ftrace_filter

Will prevent from tracing functions with 'alloc' in the name from module
ipv6 (do not forget to append to set_ftrace_filter file).

  sh# echo '*alloc*:mod:!ipv6' > set_ftrace_filter

Will trace functions with 'alloc' in the name from kernel and any
module except ipv6.

  sh# echo '*alloc*:mod:!*' > set_ftrace_filter

Will trace any function with the letters 'alloc' in the name only from
kernel, but not from any module.

  sh# echo '*:mod:!*' > set_ftrace_filter
or
  sh# echo ':mod:!' > set_ftrace_filter

Will trace every function in the kernel, but will not trace functions
from any module.

  sh# echo '*:mod:*' > set_ftrace_filter
or
  sh# echo ':mod:' > set_ftrace_filter

As the opposite will trace all functions from all modules, but not from
kernel.

  sh# echo '*:mod:*snd*' > set_ftrace_filter

Will trace your sound drivers only (if any).

Link: http://lkml.kernel.org/r/1443545176-3215-4-git-send-email-0x7f454c46@gmail.comSigned-off-by: NDmitry Safonov <0x7f454c46@gmail.com>
[ Made format changes ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

ftrace_match parameters are very related and I reduce the number of local
variables & parameters with it.
This is also preparation for module globbing as it would introduce more
realated variables & parameters.

Link: http://lkml.kernel.org/r/1443545176-3215-3-git-send-email-0x7f454c46@gmail.comSigned-off-by: NDmitry Safonov <0x7f454c46@gmail.com>
[ Made some formatting changes ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

"Not" is too abstract variable name - changed to clear_filter.
Removed ftrace_match_module_records function: comparison with !* or *
not does the general code in filter_parse_regex() as it works without
mod command for
  sh# echo '!*' > /sys/kernel/debug/tracing/set_ftrace_filter

Link: http://lkml.kernel.org/r/1443545176-3215-2-git-send-email-0x7f454c46@gmail.comSigned-off-by: NDmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

By now there isn't any subcommand for mod.

Before:
	sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
	sh$ echo '*:mod:ipv6' > set_ftrace_filter
had the same results, but now first will result in:
	sh$ echo '*:mod:ipv6:a' > set_ftrace_filter
	-bash: echo: write error: Invalid argument

Also, I clarified ftrace_mod_callback code a little.

Link: http://lkml.kernel.org/r/1443545176-3215-1-git-send-email-0x7f454c46@gmail.comSigned-off-by: NDmitry Safonov <0x7f454c46@gmail.com>
[ converted 'if (ret == 0)' to 'if (!ret)' ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

To cover the common case of sorting an array of pointers, Daniel
Wagner recently modified the library sort() to use a specific swap
function for size==8, in addition to the size==4 case which was
already handled. Since sizeof(long) is either 4 or 8,
ftrace_swap_ips() is redundant and we can just let sort() pick an
appropriate and fast swap callback.

Link: http://lkml.kernel.org/r/1441834023-13130-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The kernel now has kstrdup_const/kfree_const for reusing .rodata
(typically string literals) when possible; there's no reason to
duplicate that logic in the tracing system. Moreover, as the comment
above core_kernel_data states, it may not always return true for
.rodata - that is for example the case on x86_64, where we thus end up
kstrdup'ing all the passed-in strings.

Arguably, testing for .rodata explicitly (as kstrdup_const does) is
also more correct: I don't think one is supposed to be able to change
the name after creating the event_subsystem by passing the address of
a static char (but non-const) array.

Link: http://lkml.kernel.org/r/1441833841-12955-1-git-send-email-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the tracer options to instances options directory as well. Only add the
options for tracers that are allowed to be enabled by an instance. But note,
that tracer options are global. That is, tracer options enabled in an
instance, also take affect at the top level and in other instances.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Allow instances to have their own options, at least for the core options
(non tracer specific ones). There are a few global options that should not
be added to instances, like enabling of trace_printk, and the sched comm
recording, which do not have a specific trace instance associated to them.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation for the multi buffer instances to have their own trace_flags,
the check in ftrace_trace_stack() needs to test the trace_array descriptor
flag that is for the current event, not the global_trace descriptor.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation of having the multi buffer instances having their own trace
option flags, the trace option files needs a way to not only pass in the
flag they represent, but also the trace_array descriptor.

A new field is added to the trace_array descriptor called trace_flags_index,
which is a 32 byte character array representing a bit. This array is simply
filled with the index of the array, where

  index_array[n] = n;

Then the address of this array is passed to the file callbacks instead of
the index of the flag index. Then to retrieve both the flag index and the
trace_array descriptor:

  data is the passed in argument.

  index = *(unsigned char *)data;

  data -= index;

  /* Now data points to the address of the array in the trace_array */

  tr = container_of(data, struct trace_array, trace_flags_index);
Suggested-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.

There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The sleep-time and graph-time options are only for the function graph tracer
and are not used by anything else. As tracer options are now visible when
the tracer is not activated, its better to move the function graph specific
tracer options into the function graph tracer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In the effort to move the global trace_flags to the tracing instances, the
direct access to trace_flags must be removed from trace_printk.c

Instead, add a new trace_printk_enabled boolean that is set by a new access
function trace_printk_control(), that will enable or disable trace_printk.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a enum that denotes the last bit of the trace_flags and have a
BUILD_BUG_ON(last_bit > 32).

If we add more bits than we have in trace_flags, the kernel wont build.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>