commit 3deef52ce10514ccdebba8e8ab85f9cebd0eb3f7 upstream.

It's similar to other AMD audio devices, it also supports D3, which can
save some power drain.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5f8cf712582617d523120df67d392059eaf2fc4b upstream.

If a USB sound card reports 0 interfaces, an error condition is triggered
and the function usb_audio_probe errors out. In the error path, there was a
use-after-free vulnerability where the memory object of the card was first
freed, followed by a decrement of the number of active chips. Moving the
decrement above the atomic_dec fixes the UAF.

[ The original problem was introduced in 3.1 kernel, while it was
  developed in a different form.  The Fixes tag below indicates the
  original commit but it doesn't mean that the patch is applicable
  cleanly. -- tiwai ]

Fixes: 362e4e49 ("ALSA: usb-audio - clear chip->probing on error exit")
Reported-by: NHui Peng <benquike@gmail.com>
Reported-by: NMathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: NHui Peng <benquike@gmail.com>
Signed-off-by: NMathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 44ff57e685f96d0cb9540004cc9d1d880e7a4315 upstream.

This patch adds quirk VID/PID IDs for the SMSL D1 in order to enable
Native DSD support.

[ Moved the added entry in numerical order -- tiwai ]
Signed-off-by: NTony Das <tdas444@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f51ccf46 upstream.

The USB-serial console implementation has never reported the actual
terminal settings used. Despite storing the corresponding cflags in its
struct console, these were never honoured on later tty open() where the
tty termios would be left initialised to the driver defaults.

Unlike the serial console implementation, the USB-serial code calls
subdriver open() already at console setup. While calling set_termios()
and write() before open() looks like it could work for some USB-serial
drivers, others definitely do not expect this, so modelling this after
serial core is going to be intrusive, if at all possible.

Instead, use a (renamed) tty helper to save the termios data used at
console setup so that the tty termios reflects the actual terminal
settings after a subsequent tty open().

Note that the calls to tty_init_termios() (tty_driver_install()) and
tty_save_termios() are serialised using the disconnect mutex.

This specifically fixes a regression that was triggered by a recent
change adding software flow control to the pl2303 driver: a getty trying
to disable flow control while leaving the baud rate unchanged would now
also set the baud rate to the driver default (prior to the flow-control
change this had been a noop).

Fixes: 7041d9c3 ("USB: serial: pl2303: add support for tx xon/xoff flow control")
Cc: stable <stable@vger.kernel.org>	# 4.18
Cc: Florian Zumbiehl <florz@florz.de>
Reported-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 704620afc70cf47abb9d6a1a57f3825d2bca49cf upstream.

When reading an extra descriptor, we need to properly check the minimum
and maximum size allowed, to prevent from invalid data being sent by a
device.
Reported-by: NHui Peng <benquike@gmail.com>
Reported-by: NMathias Payer <mathias.payer@nebelwelt.net>
Co-developed-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NHui Peng <benquike@gmail.com>
Signed-off-by: NMathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d7859905301880ad3e16272399d26900af3ac496 upstream.

Add another Apple Cinema Display to the list of supported displays.
Signed-off-by: NAlexander Theissen <alex.theissen@me.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2f2dde6ba89b1ef1fe23c1138131b315d9aa4019 upstream.

Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is
in 0781:5591, will aggressively request LPM of U1/U2 during runtime,
when using this thumb drive as the OS installation key we found the
device will generate failure during U1 exit path making it dropped
from the USB bus, this causes a corrupted installation in system at
the end.

i.e.,
[  166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004
[  166.918327] usb usb2-port2: link state change
[  166.918337] usb usb2-port2: do warm reset
[  166.970039] usb usb2-port2: not warm reset yet, waiting 50ms
[  167.022040] usb usb2-port2: not warm reset yet, waiting 200ms
[  167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s
[  167.276050] usb 2-2: USB disconnect, device number 2
[  167.276058] usb 2-2: unregistering device
[  167.276060] usb 2-2: unregistering interface 2-2:1.0
[  167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk
[  167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00
...

Analyzed the USB trace in the link layer we realized it is because
of the 6-ms timer of tRecoveryConfigurationTimeout which documented
on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from
Recovery.Configuration"; device initiates U1 exit -> Recovery.Active
-> Recovery.Configuration, then the host timer timeout makes the link
transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset.

Interestingly, the other higher volume of SanDisk Ultra Flair sharing
the same VID:PID, such as 64GB, would not request LPM during runtime,
it sticks at U0 always, thus disabling LPM does not affect those thumb
drives at all.

The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583.
Signed-off-by: NHarry Pan <harry.pan@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c44c749d3b6fdfca39002e7e48e03fe9f9fe37a3 ]

of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.
This place doesn't do that, so fix it.
Signed-off-by: NYangtao Li <tiny.windzz@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5ed9dc99107144f83b6c1bb52a69b58875baf540 ]

team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin()
will send multicast join group message to notify peers. We should do this when
enabling/changed to a new port. But it doesn't make sense to do it when a port
is disabled.

On the other hand, when we set mcast_rejoin_count to 2, and do a failover,
team_port_disable() will increase mcast_rejoin.count_pending to 2 and then
team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send
4 mcast rejoin messages at latest, which will make user confused. The same
with notify_peers.count.

Fix it by deleting team_notify_peers() and team_mcast_rejoin() in
team_port_disable().
Reported-by: NLiang Li <liali@redhat.com>
Fixes: fc423ff0 ("team: add peer notification")
Fixes: 492b200e ("team: add support for sending multicast rejoins")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5bf032ef08e6a110edc1e3bfb3c66a208fb55125 ]

During device reset, queue memory is not being updated to accommodate
changes in ring buffer sizes supported by backing hardware. Track
any differences in ring buffer sizes following the reset and update
queue memory when possible.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b7cdec3d699db2e5985ad39de0f25d3b6111928e ]

The wrong index is used when cleaning up RX buffer objects during release
of RX queues. Update to use the correct index counter.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bb21ce0ad227b69ec0f83279297ee44232105d96 ]

rfc8435 says:

  For tight coupling, ffds_stateid provides the stateid to be used by
  the client to access the file.

However current implementation replaces per-mirror provided stateid with
by open or lock stateid.

Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and
nfs4_ff_layout_prepare_ds.
Signed-off-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NRick Macklem <rmacklem@uoguelph.ca>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 99f2c55591fb5c1b536263970d98c2ebc2089906 ]

Bruce pointed out that we shouldn't allocate memory while holding
a lock in the nfs4_callback_offload() and handle_async_copy()
that deal with a racing CB_OFFLOAD and reply to COPY case.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 829383e1 ]

memunmap() should be used to free the return of memremap(), not
iounmap().

Fixes: dfddb969 ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 426a593e641ebf0d9288f0a2fcab644a86820220 ]

In the original ftmac100_interrupt(), the interrupts are only disabled when
the condition "netif_running(netdev)" is true. However, this condition
causes kerenl hang in the following case. When the user requests to
disable the network device, kernel will clear the bit __LINK_STATE_START
from the dev->state and then call the driver's ndo_stop function. Network
device interrupts are not blocked during this process. If an interrupt
occurs between clearing __LINK_STATE_START and stopping network device,
kernel cannot disable the interrupts due to the condition
"netif_running(netdev)" in the ISR. Hence, kernel will hang due to the
continuous interruption of the network device.

In order to solve the above problem, the interrupts of the network device
should always be disabled in the ISR without being restricted by the
condition "netif_running(netdev)".

[V2]
Remove unnecessary curly braces.
Signed-off-by: NVincent Chen <vincentc@andestech.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0138ebb90c633f76bc71617f8f23635ce41c84fd ]

Fixes warning: 'struct module' declared inside parameter list will not be
visible outside of this definition or declaration
Signed-off-by: NDavid Abdurachmanov <david.abdurachmanov@gmail.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a5681e20b541a507c7d4fd48ae4a4040d32ee1ef ]

This patch changes to use rtnl_lock only during a reset to avoid
deadlock that could occur when a thread operating close is holding
rtnl_lock and waiting for reset_lock acquired by another thread,
which is waiting for rtnl_lock in order to set the number of tx/rx
queues during a reset.

Also, we now setting the number of tx/rx queues during a soft reset
for failover or LPM events.
Signed-off-by: NJuliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit eb62cca9bee842e5b23bd0ddfb1f271ca95e8759 ]

The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.

The patch consists of 3 fixes:

 - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
   returned PQ 0, which can potentially be another function's pq. Verify
   that flag is enabled, otherwise return default start_pq.

 - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
   returned NULL and could lead to a segmentation fault. Return default
   start_pq instead.

 - A modulo operation was added to MCOS/VFS PQ getters to make sure the
   PQ returned is in range of the required flag.

Fixes: b5a9ee7c ("qed: Revise QM cofiguration")
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 276d43f0ae963312c0cd0e2b9a85fd11ac65dfcc ]

Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.

Fixes: b5a9ee7c ("qed: Revise QM cofiguration")
Signed-off-by: NDenis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit aeabb3c96186a0f944fc2b1f25c84d5eb3a93fa9 ]

Fix a deadlock whereby the NFSv4 state manager can get stuck in the
delegation return code, waiting for a layout return to complete in
another thread. If the server reboots before that other thread
completes, then we need to be able to start a second state
manager thread in order to perform recovery.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e76ad21d070f79e566ac46ce0b0584c3c93e1b43 ]

During resume from hibernation if ena_restore_device fails,
ena_com_dev_reset() is called, and uses the readless read mechanism,
which was already destroyed by the call to
ena_com_mmio_reg_read_request_destroy(). This causes a NULL pointer
reference.

In this commit we switch the call order of the above two functions
to avoid this crash.

Fixes: d7703ddb ("net: ena: fix rare bug when failed restart/resume is followed by driver removal")
Signed-off-by: NArthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a6a66f80c85e8e20573ca03fabf32445954a88d5 ]

The current Cadence QSPI driver caused a kernel panic sporadically
when writing to QSPI. The problem was caused by writing more bytes
than needed because the QSPI operated on 4 bytes at a time.
<snip>
[   11.202044] Unable to handle kernel paging request at virtual address bffd3000
[   11.209254] pgd = e463054d
[   11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000
[   11.218202] Internal error: Oops: 7 [#1] SMP ARM
[   11.222797] Modules linked in:
[   11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f
[   11.235796] Hardware name: Altera SOCFPGA Arria10
[   11.240487] PC is at __raw_writesl+0x70/0xd4
[   11.244741] LR is at cqspi_write+0x1a0/0x2cc
</snip>
On a page boundary limit the number of bytes copied from the tx buffer
to remain within the page.

This patch uses a temporary buffer to hold the 4 bytes to write and then
copies only the bytes required from the tx buffer.
Reported-by: NAdrian Amborzewicz <adrian.ambrozewicz@intel.com>
Signed-off-by: NThor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 12d43aacf9a74d0eb66fd0ea54ebeb79ca28940f ]

Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires
MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse.
Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4d26d1d1e8065bb3326a7c06d5d4698e581443a9 ]

This reverts commit 336fd4f5.

Please note that `strlcpy()` does *NOT* do what you think it does.
strlcpy() *ALWAYS* reads the full input string, regardless of the
'length' parameter. That is, if the input is not zero-terminated,
strlcpy() will *READ* beyond input boundaries. It does this, because it
always returns the size it *would* copy if the target was big enough,
not the truncated size it actually copied.

The original code was perfectly fine. The hid device is
zero-initialized and the strncpy() functions copied up to n-1
characters. The result is always zero-terminated this way.

This is the third time someone tried to replace strncpy with strlcpy in
this function, and gets it wrong. I now added a comment that should at
least make people reconsider.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d98ccfc3948ab63152494bb6b9c17e15295c0310 ]

Currently the ti-cpufreq driver blindly registers a 'ti-cpufreq' to force
the driver to probe on any platforms where the driver is built in.
However, this should only happen on platforms that actually can make use
of the driver. There is already functionality in place to match the
SoC compatible so let's factor this out into a separate call and
make sure we find a match before creating the ti-cpufreq platform device.
Reviewed-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NDave Gerlach <d-gerlach@ti.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ]

PAGE_READ is used by RISC-V arch code included through mm headers,
and it makes sense to bring in a prefix on these in the driver.

drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined
 #define PAGE_READ   0x2
In file included from include/linux/memremap.h:7,
                 from include/linux/mm.h:27,
                 from include/linux/scatterlist.h:8,
                 from include/linux/dma-mapping.h:11,
                 from drivers/mtd/nand/raw/qcom_nandc.c:17:
arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition

Caught by riscv allmodconfig.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c6cecf4ae44e4ce9158ef8806358142c3512cd33 ]

Add some defensive coding in case one of the subprocesses created by tdc
returns nothing. If no object is returned from exec_cmd, then tdc will
halt with an unhandled exception.
Signed-off-by: NBrenda J. Butler <bjb@mojatatu.com>
Signed-off-by: NLucas Bates <lucasb@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5aaf6428526bcad98d6f51f2f679c919bb75d7e9 ]

Prevent exceptions from being raised while decoding output
from an executed command. There is no impact on tdc's
execution and the verify command phase would fail the pattern
match.
Signed-off-by: NLucas Bates <lucasb@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bff466bac59994cfcceabe4d0be5fdc1c20cd5b8 ]

Commit 3edfb7bd76bd ("gpiolib: Show correct direction from the
beginning") fixed an existing issue but broke libgpiod tests by
changing the default direction of dummy lines to output.

We don't break user-space so make gpio-mockup behave as before.
Signed-off-by: NBartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 70cdb6ad6dc342d9643a00c9092e88f0075f2b9a ]

As pointed out by Gregor, spitz keyboard matrix is broken, with or
without CONFIG_PINCTRL set, quoting :
"The gpio matrix keypard on the Zaurus C3x00 (see spitz.c) does not work
properly. Noticeable are that rshift+c does nothing where as lshift+c
creates C.  Opposite it is for rshift+a vs lshift+a, here only rshift
works. This affects a few other combinations using the rshift or lshift
buttons."

As a matter of fact, as for platform_data based builds CONFIG_PINCTRL=n
is required for now (as opposed for devicetree builds where it should be
set), this means gpio driver should change the direction, which is what
was attempted by commit c4e5ffb6 ("gpio: pxa: fix legacy non pinctrl
aware builds").

Unfortunately, the input case was inverted, and the direction change was
never done. This wasn't seen up until now because the initial platform
setup (MFP) was setting this direction. Yet in Gregory's case, the
matrix-keypad driver changes back and forth the direction dynamically,
and this is why he's the first to report it.

Fixes: c4e5ffb6 ("gpio: pxa: fix legacy non pinctrl aware builds")
Tested-by: NGreg <greguu@null.net>
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a97b9565338350d70d8d971c4ee6f0d4fa967418 ]

Add missing semicolon.

Fixes: 291d57f67d244973 ("qed: Fix rdma_info structure allocation")
Cc: Michal Kalderon <michal.kalderon@cavium.com>
Cc: Denis Bolotin <denis.bolotin@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a463146e ]

UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow: 1802201963 + 1802201963 cannot be represented
in type 'int'

The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative.  Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.

Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ]

Initialize the uid variable to zero to avoid the compilation warning.

Fixes: 7a89399f ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]

When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.

This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).

The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).

Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.

Fixes: e630664c ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 07e3a1cfb0568b6d8d7862077029af96af6690ea ]

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.

It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.

This patch should be updated/replaced later once common drm support
for max bpc lands.

Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f3 ("drm/amd/display: Do not limit color depth to 8bpc")

v2: rebase on upstream (Alex)
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 69756c6ff0de478c10100481f16c966dde3b5339 ]

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.

This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.

This proprety should be removed once common drm support for max bpc
lands.

v2: rebase on upstream (Alex)
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8dc5ae2d48976764cf3498e97963fa06befefb0e ]

Fix the year and month offset while storing it in
bnxt_fill_coredump_record().

Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4cff280a5fccf6513ed9e895bb3a4e7ad8b0cedc ]

If an io error occurs on an io issued while connecting, recovery
of the io falls flat as the state checking ends up nooping the error
handler.

Create an err_work work item that is scheduled upon an io error while
connecting. The work thread terminates all io on all queues and marks
the queues as not connected.  The termination of the io will return
back to the callee, which will then back out of the connection attempt
and will reschedule, if possible, the connection attempt.

The changes:
- in case there are several commands hitting the error handler, a
  state flag is kept so that the error work is only scheduled once,
  on the first error. The subsequent errors can be ignored.
- The calling sequence to stop keep alive and terminate the queues
  and their io is lifted from the reset routine. Made a small
  service routine used by both reset and err_work.
- During debugging, found that the teardown path can reference
  an uninitialized pointer, resulting in a NULL pointer oops.
  The aen_ops weren't initialized yet. Add validation on their
  initialization before calling the teardown routine.
Signed-off-by: NJames Smart <jsmart2021@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 007b656851ed7f94ba0fa358ac3e5d7705da6846 ]

SMC-D stress workload showed connection stalls. Since the firmware
decides to skip raising an interrupt if the SBA DMBE mask bit is
still set, this SBA DMBE mask bit should be cleared before the
IRQ handling in the SMC code runs. Otherwise there are small windows
possible with missing interrupts for incoming data.
SMC-D currently does not care about the old value of the SBA DMBE
mask.
Acked-by: NSebastian Ott <sebott@linux.ibm.com>
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a9c859033f6ec772f8e3228c343bb1321584ae0e ]

This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8
since it causes list corruption followed by kernel panic:

Workqueue: adb ffs_aio_cancel_worker
RIP: 0010:__list_add_valid+0x4d/0x70
Call Trace:
insert_work+0x47/0xb0
__queue_work+0xf6/0x400
queue_work_on+0x65/0x70
dwc3_gadget_giveback+0x44/0x50 [dwc3]
dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3]
? finish_wait+0x80/0x80
usb_ep_dequeue+0x1e/0x90
process_one_work+0x18c/0x3b0
worker_thread+0x3c/0x390
? process_one_work+0x3b0/0x3b0
kthread+0x11e/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50

This issue is seen with warm reboot stability testing.
Signed-off-by: NShen Jing <jingx.shen@intel.com>
Signed-off-by: NSaranya Gopal <saranya.gopal@intel.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>