So that its better organized.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Xfstests btrfs/011 complains about a deadlock warning,

[ 1226.649039] =========================================================
[ 1226.649039] [ INFO: possible irq lock inversion dependency detected ]
[ 1226.649039] 4.1.0+ #270 Not tainted
[ 1226.649039] ---------------------------------------------------------
[ 1226.652955] kswapd0/46 just changed the state of lock:
[ 1226.652955]  (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[ 1226.652955]  (&fs_info->dev_replace.lock){+.+.+.}

and interrupts could create inverse lock ordering between them.

[ 1226.652955]
other info that might help us debug this:
[ 1226.652955] Chain exists of:
  &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock

[ 1226.652955]  Possible interrupt unsafe locking scenario:

[ 1226.652955]        CPU0                    CPU1
[ 1226.652955]        ----                    ----
[ 1226.652955]   lock(&fs_info->dev_replace.lock);
[ 1226.652955]                                local_irq_disable();
[ 1226.652955]                                lock(&delayed_node->mutex);
[ 1226.652955]                                lock(&found->groups_sem);
[ 1226.652955]   <Interrupt>
[ 1226.652955]     lock(&delayed_node->mutex);
[ 1226.652955]
 *** DEADLOCK ***

Commit 084b6e7c ("btrfs: Fix a lockdep warning when running xfstest.") tried
to fix a similar one that has the exactly same warning, but with that, we still
run to this.

The above lock chain comes from
btrfs_commit_transaction
  ->btrfs_run_delayed_items
    ...
    ->__btrfs_update_delayed_inode
      ...
      ->__btrfs_cow_block
         ...
         ->find_free_extent
            ->cache_block_group
              ->load_free_space_cache
                ->btrfs_readpages
                  ->submit_one_bio
                    ...
                    ->__btrfs_map_block
                      ->btrfs_dev_replace_lock

However, with high memory pressure, tasks which hold dev_replace.lock can
be interrupted by kswapd and then kswapd is intended to release memory occupied
by superblock, inodes and dentries, where we may call evict_inode, and it comes
to

[ 1226.652955]  [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955]  [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30
[ 1226.652955]  [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700

delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads
to a ABBA deadlock.

To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but
things are simpler here since we only needs read's spinlock to blocking lock.

With this, btrfs/011 no more produces warnings in dmesg.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The control device is accessible when no filesystem is mounted and we
may want to query features supported by the module. This is already
possible using the sysfs files, this ioctl is for parity and
convenience.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The current practical default is ~4k on x86_64 (the logic is more complex,
simplified for brevity), the inlined files land in the metadata group and
thus consume space that could be needed for the real metadata.

The inlining brings some usability surprises:

1) total space consumption measured on various filesystems and btrfs
   with DUP metadata was quite visible because of the duplicated data
   within metadata

2) inlined data may exhaust the metadata, which are more precious in case
   the entire device space is allocated to chunks (ie. balance cannot
   make the space more compact)

3) performance suffers a bit as the inlined blocks are duplicate and
   stored far away on the device.

Proposed fix: set the default to 2048

This fixes namely 1), the total filesysystem space consumption will be on
par with other filesystems.

Partially fixes 2), more data are pushed to the data block groups.

The characteristics of 3) are based on actual small file size
distribution.

The change is independent of the metadata blockgroup type (though it's
most visible with DUP) or system page size as these parameters are not
trival to find out, compared to file size.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Simplify expression in btrfs_calc_trans_metadata_size().
Signed-off-by: NByongho Lee <bhlee.kernel@gmail.com>
Reviewed-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Reada creates 2 works for each level of tree recursively.

In case of a tree having many levels, the number of created works
is 2^level_of_tree.
Actually we don't need so many works in parallel, this patch limits
max works to BTRFS_MAX_MIRRORS * 2.

The per-fs works_counter will be also used for btrfs_reada_wait() to
check is there are background workers.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

What __readahead_hook() need exactly is fs_info, no need to convert
fs_info to root in caller and convert back in __readahead_hook()
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Introduce a new mount option "nologreplay" to co-operate with "ro" mount
option to get real readonly mount, like "norecovery" in ext* and xfs.

Since the new parse_options() need to check new flags at remount time,
so add a new parameter for parse_options().
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Tested-by: NAustin S. Hemmelgarn <ahferroin7@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Current "recovery" mount option will only try to use backup root.
However the word "recovery" is too generic and may be confusing for some
users.

Here introduce a new and more specific mount option, "usebackuproot" to
replace "recovery" mount option.
"Recovery" will be kept for compatibility reason, but will be
deprecated.

Also, since "usebackuproot" will only affect mount behavior and after
open_ctree() it has nothing to do with the filesystem, so clear the flag
after mount succeeded.

This provides the basis for later unified "norecovery" mount option.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
[ dropped usebackuproot from show_mount, added note about 'recovery' to
  docs ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NDavid Sterba <dsterba@suse.com>

The number of distinct key types is not that big that we could waste one
for something new we want to store in the tree.

Similar to the temporary items, we'll introduce a new name for an
existing key value and use the objectid for further extension.  The
victim is the BTRFS_DEV_STATS_KEY (248).

The device stats are an example of a permanent item.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The number of distinct key types is not that big that we could waste one
for something new we want to store in the tree. We'll introduce a new
name for an existing key value and use the objectid for further
extension.  The victim is the BTRFS_BALANCE_ITEM_KEY (248).

The nature of the balance status item is a good example of the temporary
item. It exists from beginning of the balance, keeps the status until it
finishes.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While at it, this commit changes btrfs_truncate_page() to truncate sectorsized
blocks instead of pages. Hence the function has been renamed to
btrfs_truncate_block().
Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently, the code reserves/releases extents in multiples of PAGE_CACHE_SIZE
units. Fix this by doing reservation/releases in block size units.
Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

wait_for_snapshot_creation() is in same group with oher two:
 btrfs_start_write_no_snapshoting()
 btrfs_end_write_no_snapshoting()

Rename wait_for_snapshot_creation() and move it into same place
with other two.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>

While running a stress test I ran into a deadlock when running the delayed
iputs at transaction time, which produced the following report and trace:

[  886.399989] =============================================
[  886.400871] [ INFO: possible recursive locking detected ]
[  886.401663] 4.4.0-rc6-btrfs-next-18+ #1 Not tainted
[  886.402384] ---------------------------------------------
[  886.403182] fio/8277 is trying to acquire lock:
[  886.403568]  (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.403568]
[  886.403568] but task is already holding lock:
[  886.403568]  (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.403568]
[  886.403568] other info that might help us debug this:
[  886.403568]  Possible unsafe locking scenario:
[  886.403568]
[  886.403568]        CPU0
[  886.403568]        ----
[  886.403568]   lock(&fs_info->delayed_iput_sem);
[  886.403568]   lock(&fs_info->delayed_iput_sem);
[  886.403568]
[  886.403568]  *** DEADLOCK ***
[  886.403568]
[  886.403568]  May be due to missing lock nesting notation
[  886.403568]
[  886.403568] 3 locks held by fio/8277:
[  886.403568]  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff81174c4c>] __sb_start_write+0x5f/0xb0
[  886.403568]  #1:  (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa054620d>] btrfs_file_write_iter+0x73/0x408 [btrfs]
[  886.403568]  #2:  (&fs_info->delayed_iput_sem){++++..}, at: [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.403568]
[  886.403568] stack backtrace:
[  886.403568] CPU: 6 PID: 8277 Comm: fio Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[  886.403568] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[  886.403568]  0000000000000000 ffff88009f80f770 ffffffff8125d4fd ffffffff82af1fc0
[  886.403568]  ffff88009f80f830 ffffffff8108e5f9 0000000200000000 ffff88009fd92290
[  886.403568]  0000000000000000 ffffffff82af1fc0 ffffffff829cfb01 00042b216d008804
[  886.403568] Call Trace:
[  886.403568]  [<ffffffff8125d4fd>] dump_stack+0x4e/0x79
[  886.403568]  [<ffffffff8108e5f9>] __lock_acquire+0xd42/0xf0b
[  886.403568]  [<ffffffff810c22db>] ? __module_address+0xdf/0x108
[  886.403568]  [<ffffffff8108eb77>] lock_acquire+0x10d/0x194
[  886.403568]  [<ffffffff8108eb77>] ? lock_acquire+0x10d/0x194
[  886.403568]  [<ffffffffa0538823>] ? btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.489542]  [<ffffffff8148556b>] down_read+0x3e/0x4d
[  886.489542]  [<ffffffffa0538823>] ? btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.489542]  [<ffffffffa0538823>] btrfs_run_delayed_iputs+0x36/0xbf [btrfs]
[  886.489542]  [<ffffffffa0533953>] btrfs_commit_transaction+0x8f5/0x96e [btrfs]
[  886.489542]  [<ffffffffa0521d7a>] flush_space+0x435/0x44a [btrfs]
[  886.489542]  [<ffffffffa052218b>] ? reserve_metadata_bytes+0x26a/0x384 [btrfs]
[  886.489542]  [<ffffffffa05221ae>] reserve_metadata_bytes+0x28d/0x384 [btrfs]
[  886.489542]  [<ffffffffa052256c>] ? btrfs_block_rsv_refill+0x58/0x96 [btrfs]
[  886.489542]  [<ffffffffa0522584>] btrfs_block_rsv_refill+0x70/0x96 [btrfs]
[  886.489542]  [<ffffffffa053d747>] btrfs_evict_inode+0x394/0x55a [btrfs]
[  886.489542]  [<ffffffff81188e31>] evict+0xa7/0x15c
[  886.489542]  [<ffffffff81189878>] iput+0x1d3/0x266
[  886.489542]  [<ffffffffa053887c>] btrfs_run_delayed_iputs+0x8f/0xbf [btrfs]
[  886.489542]  [<ffffffffa0533953>] btrfs_commit_transaction+0x8f5/0x96e [btrfs]
[  886.489542]  [<ffffffff81085096>] ? signal_pending_state+0x31/0x31
[  886.489542]  [<ffffffffa0521191>] btrfs_alloc_data_chunk_ondemand+0x1d7/0x288 [btrfs]
[  886.489542]  [<ffffffffa0521282>] btrfs_check_data_free_space+0x40/0x59 [btrfs]
[  886.489542]  [<ffffffffa05228f5>] btrfs_delalloc_reserve_space+0x1e/0x4e [btrfs]
[  886.489542]  [<ffffffffa053620a>] btrfs_direct_IO+0x10c/0x27e [btrfs]
[  886.489542]  [<ffffffff8111d9a1>] generic_file_direct_write+0xb3/0x128
[  886.489542]  [<ffffffffa05463c3>] btrfs_file_write_iter+0x229/0x408 [btrfs]
[  886.489542]  [<ffffffff8108ae38>] ? __lock_is_held+0x38/0x50
[  886.489542]  [<ffffffff8117279e>] __vfs_write+0x7c/0xa5
[  886.489542]  [<ffffffff81172cda>] vfs_write+0xa0/0xe4
[  886.489542]  [<ffffffff811734cc>] SyS_write+0x50/0x7e
[  886.489542]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[ 1081.852335] INFO: task fio:8244 blocked for more than 120 seconds.
[ 1081.854348]       Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[ 1081.857560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1081.863227] fio        D ffff880213f9bb28     0  8244   8240 0x00000000
[ 1081.868719]  ffff880213f9bb28 00ffffff810fc6b0 ffffffff0000000a ffff88023ed55240
[ 1081.872499]  ffff880206b5d400 ffff880213f9c000 ffff88020a4d5318 ffff880206b5d400
[ 1081.876834]  ffffffff00000001 ffff880206b5d400 ffff880213f9bb40 ffffffff81482ba4
[ 1081.880782] Call Trace:
[ 1081.881793]  [<ffffffff81482ba4>] schedule+0x7f/0x97
[ 1081.883340]  [<ffffffff81485eb5>] rwsem_down_write_failed+0x2d5/0x325
[ 1081.895525]  [<ffffffff8108d48d>] ? trace_hardirqs_on_caller+0x16/0x1ab
[ 1081.897419]  [<ffffffff81269723>] call_rwsem_down_write_failed+0x13/0x20
[ 1081.899251]  [<ffffffff81269723>] ? call_rwsem_down_write_failed+0x13/0x20
[ 1081.901063]  [<ffffffff81089fae>] ? __down_write_nested.isra.0+0x1f/0x21
[ 1081.902365]  [<ffffffff814855bd>] down_write+0x43/0x57
[ 1081.903846]  [<ffffffffa05211b0>] ? btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1081.906078]  [<ffffffffa05211b0>] btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1081.908846]  [<ffffffff8108d461>] ? mark_held_locks+0x56/0x6c
[ 1081.910409]  [<ffffffffa0521282>] btrfs_check_data_free_space+0x40/0x59 [btrfs]
[ 1081.912482]  [<ffffffffa05228f5>] btrfs_delalloc_reserve_space+0x1e/0x4e [btrfs]
[ 1081.914597]  [<ffffffffa053620a>] btrfs_direct_IO+0x10c/0x27e [btrfs]
[ 1081.919037]  [<ffffffff8111d9a1>] generic_file_direct_write+0xb3/0x128
[ 1081.920754]  [<ffffffffa05463c3>] btrfs_file_write_iter+0x229/0x408 [btrfs]
[ 1081.922496]  [<ffffffff8108ae38>] ? __lock_is_held+0x38/0x50
[ 1081.923922]  [<ffffffff8117279e>] __vfs_write+0x7c/0xa5
[ 1081.925275]  [<ffffffff81172cda>] vfs_write+0xa0/0xe4
[ 1081.926584]  [<ffffffff811734cc>] SyS_write+0x50/0x7e
[ 1081.927968]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[ 1081.985293] INFO: lockdep is turned off.
[ 1081.986132] INFO: task fio:8249 blocked for more than 120 seconds.
[ 1081.987434]       Not tainted 4.4.0-rc6-btrfs-next-18+ #1
[ 1081.988534] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1081.990147] fio        D ffff880218febbb8     0  8249   8240 0x00000000
[ 1081.991626]  ffff880218febbb8 00ffffff81486b8e ffff88020000000b ffff88023ed75240
[ 1081.993258]  ffff8802120a9a00 ffff880218fec000 ffff88020a4d5318 ffff8802120a9a00
[ 1081.994850]  ffffffff00000001 ffff8802120a9a00 ffff880218febbd0 ffffffff81482ba4
[ 1081.996485] Call Trace:
[ 1081.997037]  [<ffffffff81482ba4>] schedule+0x7f/0x97
[ 1081.998017]  [<ffffffff81485eb5>] rwsem_down_write_failed+0x2d5/0x325
[ 1081.999241]  [<ffffffff810852a5>] ? finish_wait+0x6d/0x76
[ 1082.000306]  [<ffffffff81269723>] call_rwsem_down_write_failed+0x13/0x20
[ 1082.001533]  [<ffffffff81269723>] ? call_rwsem_down_write_failed+0x13/0x20
[ 1082.002776]  [<ffffffff81089fae>] ? __down_write_nested.isra.0+0x1f/0x21
[ 1082.003995]  [<ffffffff814855bd>] down_write+0x43/0x57
[ 1082.005000]  [<ffffffffa05211b0>] ? btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1082.007403]  [<ffffffffa05211b0>] btrfs_alloc_data_chunk_ondemand+0x1f6/0x288 [btrfs]
[ 1082.008988]  [<ffffffffa0545064>] btrfs_fallocate+0x7c1/0xc2f [btrfs]
[ 1082.010193]  [<ffffffff8108a1ba>] ? percpu_down_read+0x4e/0x77
[ 1082.011280]  [<ffffffff81174c4c>] ? __sb_start_write+0x5f/0xb0
[ 1082.012265]  [<ffffffff81174c4c>] ? __sb_start_write+0x5f/0xb0
[ 1082.013021]  [<ffffffff811712e4>] vfs_fallocate+0x170/0x1ff
[ 1082.013738]  [<ffffffff81181ebb>] ioctl_preallocate+0x89/0x9b
[ 1082.014778]  [<ffffffff811822d7>] do_vfs_ioctl+0x40a/0x4ea
[ 1082.015778]  [<ffffffff81176ea7>] ? SYSC_newfstat+0x25/0x2e
[ 1082.016806]  [<ffffffff8118b4de>] ? __fget_light+0x4d/0x71
[ 1082.017789]  [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[ 1082.018706]  [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f

This happens because we can recursively acquire the semaphore
fs_info->delayed_iput_sem when attempting to allocate space to satisfy
a file write request as shown in the first trace above - when committing
a transaction we acquire (down_read) the semaphore before running the
delayed iputs, and when running a delayed iput() we can end up calling
an inode's eviction handler, which in turn commits another transaction
and attempts to acquire (down_read) again the semaphore to run more
delayed iput operations.
This results in a deadlock because if a task acquires multiple times a
semaphore it should invoke down_read_nested() with a different lockdep
class for each level of recursion.

Fix this by simplifying the implementation and use a mutex instead that
is acquired by the cleaner kthread before it runs the delayed iputs
instead of always acquiring a semaphore before delayed references are
run from anywhere.

Fixes: d7c15171 (btrfs: Fix NO_SPACE bug caused by delayed-iput)
Cc: stable@vger.kernel.org   # 4.1+
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

The values of btrfs_path::locks are 0 to 4, fit into a u8. Let's see:

* overall size of btrfs_path drops down from 136 to 112 (-24 bytes),
* better packing in a slab page +6 objects
* the whole structure now fits to 2 cachelines
* slight decrease in code size:

   text    data     bss     dec     hex filename
 938731   43670   23144 1005545   f57e9 fs/btrfs/btrfs.ko.before
 938203   43670   23144 1005017   f55d9 fs/btrfs/btrfs.ko.after

(and the generated assembly does not change much)

The main purpose is to decrease the size of the structure without
affecting performance. The byte access is usually well behaving accross
arches, the locks are not accessed frequently and sometimes just
compared to zero.

Note for further size reduction attempts: the slots could be made u16
but this might generate worse code on some arches (non-byte and non-int
access). Also the range of operations on slots is wider compared to
locks and the potential performance drop should be evaluated first.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The level is 0..7, we can use smaller type. The size of btrfs_path is now
136 bytes from 144, which is +2 objects that fit into a 4k slab.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The possible values for reada are all positive and bounded, we can later
save some bytes by storing it in u8.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Replace the integers by enums for better readability. The value 2 does
not have any meaning since a7175319
"Btrfs: do less aggressive btree readahead" (2009-01-22).
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are a few statically initialized arrays that can be made const.
The remaining (like file_system_type, sysfs attributes or prop handlers)
do not allow that due to type mismatch when passed to the APIs or
because the structures are modified through other members.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We use many constants to represent size and offset value.  And to make
code readable we use '256 * 1024 * 1024' instead of '268435456' to
represent '256MB'.  However we can make far more readable with 'SZ_256MB'
which is defined in the 'linux/sizes.h'.

So this patch replaces 'xxx * 1024 * 1024' kind of expression with
single 'SZ_xxxMB' if 'xxx' is a power of 2 then 'xxx * SZ_1M' if 'xxx' is
not a power of 2. And I haven't touched to '4096' & '8192' because it's
more intuitive than 'SZ_4KB' & 'SZ_8KB'.
Signed-off-by: NByongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Conform to __btrfs_fs_incompat() cast-to-bool (!!) by explicitly
returning boolean not int.
Signed-off-by: NAlexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that the VFS encapsulates the dedupe ioctl, wire up btrfs to it.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This is a short term solution to make sure btrfs_run_delayed_refs()
doesn't change the extent tree while we are scanning it to create the
free space tree.

Longer term we need to synchronize scanning the block groups one by one,
similar to what happens during a balance.
Signed-off-by: NChris Mason <clm@fb.com>

Now we can finally hook up everything so we can actually use free space
tree. The free space tree is enabled by passing the space_cache=v2 mount
option. On the first mount with the this option set, the free space tree
will be created and the FREE_SPACE_TREE read-only compat bit will be
set. Any time the filesystem is mounted from then on, we must use the
free space tree. The clear_cache option will also clear the free space
tree.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

The free space cache has turned out to be a scalability bottleneck on
large, busy filesystems. When the cache for a lot of block groups needs
to be written out, we can get extremely long commit times; if this
happens in the critical section, things are especially bad because we
block new transactions from happening.

The main problem with the free space cache is that it has to be written
out in its entirety and is managed in an ad hoc fashion. Using a B-tree
to store free space fixes this: updates can be done as needed and we get
all of the benefits of using a B-tree: checksumming, RAID handling,
well-understood behavior.

With the free space tree, we get commit times that are about the same as
the no cache case with load times slower than the free space cache case
but still much faster than the no cache case. Free space is represented
with extents until it becomes more space-efficient to use bitmaps,
giving us similar space overhead to the free space cache.

The operations on the free space tree are: adding and removing free
space, handling the creation and deletion of block groups, and loading
the free space for a block group. We can also create the free space tree
by walking the extent tree and clear the free space tree.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

The on-disk format for the free space tree is straightforward. Each
block group is represented in the free space tree by a free space info
item that stores accounting information: whether the free space for this
block group is stored as bitmaps or extents and how many extents of free
space exist for this block group (regardless of which format is being
used in the tree). Extents are (start, FREE_SPACE_EXTENT, length) keys
with no corresponding item, and bitmaps instead have the
FREE_SPACE_BITMAP type and have a bitmap item attached, which is just an
array of bytes.
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

We're also going to load the free space tree from caching_thread(), so
we should refactor some of the common code.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

We're finally going to add one of these for the free space tree, so
let's add the same nice helpers that we have for the incompat bits.
While we're add it, also add helpers to clear the bits.
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

The btrfs clone ioctls are now adopted by other file systems, with NFS
and CIFS already having support for them, and XFS being under active
development.  To avoid growth of various slightly incompatible
implementations, add one to the VFS.  Note that clones are different from
file copies in several ways:

 - they are atomic vs other writers
 - they support whole file clones
 - they support 64-bit legth clones
 - they do not allow partial success (aka short writes)
 - clones are expected to be a fast metadata operation

Because of that it would be rather cumbersome to try to piggyback them on
top of the recent clone_file_range infrastructure.  The converse isn't
true and the clone_file_range system call could try clone file range as
a first attempt to copy, something that further patches will enable.

Based on earlier work from Peng Tao.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The value is 0 and never changes, we can propagate the value, remove
wait and the implied dead code.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There's only one caller and single value, we can propagate it down to
the callee and remove the unused parameter.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This rearranges the existing COPY_RANGE ioctl implementation so that the
.copy_file_range file operation can call the core loop that copies file
data extent items.

The extent copying loop is lifted up into its own function.  It retains
the core btrfs error checks that should be shared.
Signed-off-by: NZach Brown <zab@redhat.com>
[Anna Schumaker: Make flags an unsigned int,
                 Check for COPY_FR_REFLINK]
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently scrub can race with the cleaner kthread when the later attempts
to delete an unused block group, and the result is preventing the cleaner
kthread from ever deleting later the block group - unless the block group
becomes used and unused again. The following diagram illustrates that
race:

              CPU 1                                 CPU 2

 cleaner kthread
   btrfs_delete_unused_bgs()

     gets block group X from
     fs_info->unused_bgs and
     removes it from that list

                                             scrub_enumerate_chunks()

                                               searches device tree using
                                               its commit root

                                               finds device extent for
                                               block group X

                                               gets block group X from the tree
                                               fs_info->block_group_cache_tree
                                               (via btrfs_lookup_block_group())

                                               sets bg X to RO

     sees the block group is
     already RO and therefore
     doesn't delete it nor adds
     it back to unused list

So fix this by making scrub add the block group again to the list of
unused block groups if the block group is still unused when it finished
scrubbing it and it hasn't been removed already.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

We were using only 1 transaction unit when attempting to delete an unused
block group but in reality we need 3 + N units, where N corresponds to the
number of stripes. We were accounting only for the addition of the orphan
item (for the block group's free space cache inode) but we were not
accounting that we need to delete one block group item from the extent
tree, one free space item from the tree of tree roots and N device extent
items from the device tree.

While one unit is not enough, it worked most of the time because for each
single unit we are too pessimistic and assume an entire tree path, with
the highest possible heigth (8), needs to be COWed with eventual node
splits at every possible level in the tree, so there was usually enough
reserved space for removing all the items and adding the orphan item.

However after adding the orphan item, writepages() can by called by the VM
subsystem against the btree inode when we are under memory pressure, which
causes writeback to start for the nodes we COWed before, this forces the
operation to remove the free space item to COW again some (or all of) the
same nodes (in the tree of tree roots). Even without writepages() being
called, we could fail with ENOSPC because these items are located in
multiple trees and one of them might have a higher heigth and require
node/leaf splits at many levels, exhausting all the reserved space before
removing all the items and adding the orphan.

In the kernel 4.0 release, commit 3d84be79 ("Btrfs: fix BUG_ON in
btrfs_orphan_add() when delete unused block group"), we attempted to fix
a BUG_ON due to ENOSPC when trying to add the orphan item by making the
cleaner kthread reserve one transaction unit before attempting to remove
the block group, but this was not enough. We had a couple user reports
still hitting the same BUG_ON after 4.0, like Stefan Priebe's report on
a 4.2-rc6 kernel for example:

    http://www.spinics.net/lists/linux-btrfs/msg46070.html

So fix this by reserving all the necessary units of metadata.
Reported-by: NStefan Priebe <s.priebe@profihost.ag>
Fixes: 3d84be79 ("Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group")
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

It's possible to reach a state where the cleaner kthread isn't able to
start a transaction to delete an unused block group due to lack of enough
free metadata space and due to lack of unallocated device space to allocate
a new metadata block group as well. If this happens try to use space from
the global block group reserve just like we do for unlink operations, so
that we don't reach a permanent state where starting a transaction for
filesystem operations (file creation, renames, etc) keeps failing with
-ENOSPC. Such an unfortunate state was observed on a machine where over
a dozen unused data block groups existed and the cleaner kthread was
failing to delete them due to ENOSPC error when attempting to start a
transaction, and even running balance with a -dusage=0 filter failed with
ENOSPC as well. Also unmounting and mounting again the filesystem didn't
help. Allowing the cleaner kthread to use the global block reserve to
delete the unused data block groups fixed the problem.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

There are many places which use mapping_gfp_mask to restrict a more
generic gfp mask which would be used for allocations which are not
directly related to the page cache but they are performed in the same
context.

Let's introduce a helper function which makes the restriction explicit and
easier to track.  This patch doesn't introduce any functional changes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Between btrfs_allocerved_file_extent() and
btrfs_add_delayed_qgroup_reserve(), there is a window that delayed_refs
are run and delayed ref head maybe freed before
btrfs_add_delayed_qgroup_reserve().

This will cause btrfs_dad_delayed_qgroup_reserve() to return -ENOENT,
and cause transaction to be aborted.

This patch will record qgroup reserve space info into delayed_ref_head
at btrfs_add_delayed_ref(), to eliminate the race window.
Reported-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NChris Mason <clm@fb.com>